DIN EN ISO 11148-6-2013 Hand-held non-electric power tools - Safety requirements - Part 6 Assembly power tools for threaded fasteners (ISO 11148-6 2012) German version EN ISO 11148.pdf

1、May 2013 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25

2、.140.10!%$Y|“2015489www.din.deDDIN EN ISO 11148-6Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012);English version EN ISO 11148-6:2012,English translation of DIN EN ISO 11148-6:2013-05Handgehaltene nicht elektrisch betrieben

3、e Maschinen Sicherheitsanforderungen Teil 6: Maschinen fr Schraubverbindungen (ISO 11148-6:2012);Englische Fassung EN ISO 11148-6:2012,Englische bersetzung von DIN EN ISO 11148-6:2013-05Machines portatives moteur non lectrique Exigences de scurit Partie 6: Machines dassemblage pour lments de fixatio

4、n filets (ISO 11148-6:2012);Version anglaise EN ISO 11148-6:2012,Traduction anglaise de DIN EN ISO 11148-6:2013-05SupersedesDIN EN ISO 11148-6:2011-03www.beuth.deDocument comprises 37 pagesIn case of doubt, the German-language original shall be considered authoritative.05.13DIN EN ISO 11148-6:2013-0

5、5 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN ISO 11148-6:2012) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment” in collaboration with Technical Committee CEN/TC

6、255 “Hand-held, non-electric power tools Safety Structure” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-08-13 AA Druckluftwerkzeuge und -maschinen of Sec

7、tion Kompressoren und Vakuumtechnik. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard se

8、rves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the

9、 Machinery Directive (“presumption of conformity”). The International Standards referred to in this document and taken over as European Standards have been published as the corresponding DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Sta

10、ndards with the same number, there are no national standards available, except for: ISO 3864-1 DIN 4844-1 Amendments This standard differs from DIN EN ISO 11148-6:2011-03 as follows: a) a new Subclause 6.2.2.1 “General” has been included; b) in Subclause 6.2.2.9 “Accessory hazards” (formerly 6.2.2.8

11、), the second indent has been replaced. Previous editions DIN EN 792-6: 2001-02, 2009-12 DIN EN ISO 11148-6: 2011-03 National Annex NA (informative) Bibliography DIN 4844-1:2005, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public are

12、as EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11148-6 December 2012 ICS 25.140.10 Supersedes EN ISO 11148-6:2010English Version Hand-held non-electric power tools - Safety requirements -Part 6: Assembly power tools for threaded fasteners(ISO 11148-6:2012) Machines portatives moteur non

13、 lectrique - Exigences de scurit - Partie 6: Machines dassemblage pour lments de fixation filets (ISO 11148-6:2012) Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 6: Maschinen fr Schraubverbindungen (ISO 11148-6:2012) This European Standard was approved by CEN

14、on 17 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

15、 may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifi

16、ed to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

17、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre

18、: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11148-6:2012: EContents PageForeword .Introduction 1 Scope 2 Normative references .3 Terms and definitions .3.1 General definitions 3.2 De

19、finitions related to assembly power tools for threaded fasteners 4 Safety requirements and/or protective measures 4.1 General .4.2 Mechanical safety 4.3 Thermal safety 4.4 Noise reduction 4.5 Vibration .4.6 Materials and substances processed, used or exhausted .4.7 Ergonomics .4.8 Controls .5 Verifi

20、cation 145.1 General conditions for tests .145.2 Noise .145.3 Vibration .145.4 Unintentional start .145.5 Power tool construction 145.6 Structure of verification of safety requirements . 156 Information for use . 156.1 Marking, signs and written warnings . 156.2 Instructions handbook .166.3 Operatin

21、g instructions .6.4 Data .6.5 Maintenance instructions Annex A (informative) List of significant hazards Annex B (informative) Examples of assembly power tools for threaded fasteners covered by thispart ofISO 11148 25Annex C (normative) Symbols for labels and signs27Annex D (normative) Additional sa

22、fety requirements related to internal combustion engine power tools .29Bibliography .Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC DIN EN ISO 11148-6:2013-05 EN ISO 11148-6:2012 (E) 23455668999101010111113212122233334.For

23、eword This document (EN ISO 11148-6:2012) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment“ in collaboration with Technical Committee CEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of which is held by SIS. This Eu

24、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the element

25、s of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11148-6:2010. This document has been prepared under a mandate given to CEN by the European Commission and the Europe

26、an Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following cou

27、ntries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P

28、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11148-6:2012 has been approved by CEN as a EN ISO 11148-6:2012 without any modification. DIN EN ISO 11148-6:2013-05 EN ISO 11148-6:2012 (E) 3 IntroductionThis d

29、ocument is a type C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of ISO 11148.When provisions of this type C standard are different from those that are stated in type A or B

30、standards, the requirements of this type C standard take precedence over the requirements of other standards for machines that have been designed and built according to the requirements of this type C standard.ISO 11148 consists of a number of independent parts for individual types of hand-held, non

31、-electric power tools.Certain elements of this part of ISO 11148 cover hand-held, non-electric power tools driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the safety aspects relating to internal combustion engines are found in a normative annex.The parts are

32、type C standards and refer to pertinent standards of types A and B where such standards are applicable.DIN EN ISO 11148-6:2013-05 EN ISO 11148-6:2012 (E) 4IMPORTANT The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users s

33、hould consider printing this document using a colour printer. ISO 3864-4 provides colourimetric and photometric properties together with, as a guideline, references from colour order systems.1 ScopeThis part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “assembly power tool

34、s for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operators hand or han

35、ds, with or without a suspension, e.g. a balancer.This part of ISO 11148 covers air-hydraulic impulse wrenches; impact wrenches; fastener installation tools; nutrunners; open-ended spanners (crow-foot with open-ended socket or tube nut wrench); ratchet wrenches; screwdrivers.NOTE 1 For examples of a

36、ssembly power tools for threaded fasteners, see Annex B.This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.This part of ISO 11148 deals with all significant hazards, hazardous situat

37、ions or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.NOTE 2 EN 13463-1 gives requirements for

38、 non-electrical equipment for potentially explosive atmospheres.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

39、 (including any amendments) applies.ISO 3857-3, Compressors, pneumatic tools and machines Vocabulary Part 3: Pneumatic tools and machinesISO 3864-2, Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labelsDIN EN ISO 11148-6:2013-05 EN ISO 11148-6:2012 (E)

40、 5 ISO 5391, Pneumatic tools and machines VocabularyISO 7000, Graphical symbols for use on equipment Registered symbols1)ISO 7010, Graphical symbols Safety colours and safety signs Registered safety signs1)ISO 9158, Road vehicles Nozzle spouts for unleaded gasolineISO 9159, Road vehicles Nozzle spou

41、ts for leaded gasoline and diesel fuelISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reductionISO 13732-1, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfacesISO 13732-3, Ergonom

42、ics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfacesISO 15744, Hand-held non-electric power tools Noise measurement code Engineering method (grade 2)ISO 17066, Hydraulic tools VocabularyISO 20643, Mechanical vibration Hand-held a

43、nd hand-guided machinery Principles for evaluation of vibration emissionISO 28927-2, Hand-held portable power tools Test methods for evaluation of vibration emission Part 2: Wrenches, nutrunners and screwdriversEN 12096, Mechanical vibration Declaration and verification of vibration emission values3

44、 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 3857-3, ISO 5391, ISO 12100 and ISO 17066 (for hydraulic tools), and the following apply.3.1 General definitions3.1.1hand-held power toolmachine operated by one or two hands and driven by rotary or linear

45、 motors powered by compressed air, hydraulic fluid, gaseous or liquid fuel, electricity or stored energy (e.g. by a spring) to do mechanical work and so designed that the motor and the mechanism form an assembly that can easily be brought to its place of operationNOTE Hand-held power tools driven by

46、 compressed air or gas are called pneumatic tools (or air tools). Hand-held power tools driven by hydraulic liquid are called hydraulic tools.3.1.2inserted tooltool inserted in the assembly power tool for threaded fasteners to perform the intended work3.1.3service tooltool intended for performing ma

47、intenance or service on the assembly power tool for threaded fasteners3.1.4control devicedevice to start and stop the assembly power tool for threaded fasteners or to change the direction of the rotation or to control the functional characteristics such as speed and power1) The graphical symbol coll

48、ections of ISO 7000, ISO 7001 and ISO 7010 are also available online in the ISO web store. For more information, consult http:/www.iso.org/iso/fr/publications_and_e-products/databases.htm.DIN EN ISO 11148-6:2013-05 EN ISO 11148-6:2012 (E) 63.1.5start-and-stop devicethrottlemanually operated control

49、on the assembly power tool for threaded fasteners by which the energy supply to the motor can be turned on and off3.1.6hold-to-run start-and-stop deviceconstant-pressure throttlestart-and-stop device that automatically returns to the OFF position when force on the start-and-stop device actuator is released3.1.7lock-on start-and-sto