DIN EN ISO 11546-1-2010 Acoustics - Determination of sound insulation performances of enclosures - Part 1 Measurements under laboratory conditions (for declaration purposes) (ISO 1.pdf

1、January 2010DEUTSCHE NORM English price group 13No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.01!$RT“1564749w

2、ww.din.deDDIN EN ISO 11546-1Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declarationpurposes) (ISO 11546-1:1995)English version of DIN EN ISO 11546-1:2010-01Akustik Bestimmung der Schalldmmung von Schallschutzkapseln Tei

3、l 1: Messungen unter Laborbedingungen (zum Zweck der Kennzeichnung)(ISO 11546-1:1995)Englische Fassung DIN EN ISO 11546-1:2010-01SupersedesDIN EN ISO 11546-1:1996-06www.beuth.deDocument comprises 23 pagesDIN EN ISO 11546-1:2010-01 2 National foreword This standard has been prepared by Technical Comm

4、ittee ISO/TC 43 “Acoustics”, Subcommittee SC 1 “Noise” (Secretariat: DS, Denmark), Working Group WG 36 “Acoustics Methods for determination of the acoustical performance of noise attenuating devices” in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DS, Denmark). The res

5、ponsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-02-02 AA Schallschutzeinrichtungen (Schall-dmpfer, Ka

6、pseln, elastische Lagerung). Amendment of the European Machinery Directive has made it necessary to review Annex Z in terms of the essential requirements of EU Directive 98/37/EC and the revised Directive, 2006/42/EC. The technical substance of the standard has not been changed. The DIN Standards co

7、rresponding to the International Standards referred to in this document are shown below. The IEC numbers are listed in the currently valid five-digit versions, although they are cited in the text by their last three or four digits only (i.e. without “60”). ISO 140-6 DIN EN ISO 140-6 ISO 9614-1 DIN E

8、N ISO 9614-1 ISO 717-1 DIN EN ISO 717-1 ISO 9614-2 DIN EN ISO 9614-2 ISO 3741 DIN EN ISO 3741 ISO 11201 DIN EN ISO 11201 ISO 3742 DIN EN ISO 3741 ISO 11204 DIN EN ISO 11204 ISO 3743-1 DIN EN ISO 3743-1 IEC 60651 DIN EN 61672 (all parts) ISO 3743-2 DIN EN ISO 3743-2 IEC 60804 DIN EN 61672 (all parts)

9、 ISO 3744 DIN EN ISO 3744 IEC 60942 DIN EN 60942 ISO 4871 DIN EN ISO 4871 IEC 61260 DIN EN 61260 The national standards are given in Annex NA “Bibliography”. Amendments This standard differs from DIN EN ISO 11546-1:1996-06 as follows: a) Annexes ZA and ZB have been supplemented to show the relations

10、hip between this standard and the Machinery Directive 98/37/EC and the new revised Machinery Directive 2006/42/EC. Previous editions DIN EN ISO 11546-1: 1996-06 DIN EN ISO 11546-1:2010-01 3 National Annex NA (informative) Bibliography DIN EN 60942, Electroacoustics Sound calibrators DIN EN 61260, El

11、ectroacoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN 61672-2, Electroacoustics Sound level meters Part 2: Pattern evaluation tests DIN EN 61672-3, Electroacoustics Sound level meters Part 3: Periodic tests DIN

12、 EN ISO 140-6, Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors DIN EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation DIN EN IS

13、O 3741, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for reverberation rooms DIN EN ISO 3743-1, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Compari

14、son method for hard-walled test rooms DIN EN ISO 3743-2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms DIN EN ISO 3744, Acoustics Determinat

15、ion of sound power levels of noise sources using sound pres-sure Engineering method in an essential free field over a reflecting plane DIN EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment DIN EN ISO 9614-1, Acoustics Determination of sound power

16、 levels of noise sources using sound inten-sity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound inten-sity Part 2: Measurement by scanning DIN EN ISO 11201, Acoustics Noise emitted by machinery and equipment Measure

17、ment of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and a

18、t other specified positions Method requiring environmental corrections DIN EN ISO 11546-1:2010-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11546-1 August 2009 ICS 17.140.01 Supersedes EN ISO 11546-1:1995 English Version Acoustics - Determination of

19、sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) Acoustique - Dtermination de lisolement acoustique des encoffrements - Partie 1: Mesurages dans des conditions de laboratoire (aux fins de dclaration) (ISO 115

20、46-1:1995)Akustik - Bestimmung der Schalldmmung von Schallschutzkapseln - Teil 1: Messungen unter Laborbedingungen (zum Zweck der Kennzeichnung) (ISO 11546-1:1995) This European Standard was approved by CEN on 3 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations w

21、hich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European

22、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the nation

23、al standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni

24、ted Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11546-1

25、:2009: EContents Page Foreword3 1 Scope 4 2 Normative references 4 3 Definitions 5 4 Choice of measurement method6 5 Instrumentation8 6 Test methods applicable to enclosures with the actual sound source .8 6.1 General8 6.2 Determination of sound power insulation 8 6.3 Determination of sound pressure

26、 insulation at a specified position.9 7 Test methods applicable to enclosures without the actual sound source .9 7.1 General9 7.2 Reciprocity method .9 7.3 Artificial sound source method. 10 7.4 Weighted sound power insulation and sound pressure insulation (reciprocity method) 11 7.5 Estimated noise

27、 insulation due to the enclosure for a specific noise spectrum 11 8 Uncertainty 11 9 Information to be recorded 11 9.1 Test object. 11 9.2 Test conditions . 11 9.3 Instrumentation. 12 9.4 Acoustical data . 12 9.5 Further information 12 10 Information to be reported. 12 Annex A (normative) Artificial

28、 sound source 13 Annex B (informative) Example of a source spectrum. 15 Annex C (informative) Estimated noise insulation due to the enclosure for a specific noise spectrum 16 Annex D (informative) Bibliography . 17 Annex ZA (informative) Relationship between this European Standard and the Essential

29、Requirements of EU Directive 98/37/EC.18 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC. 19 2 DIN EN ISO 11546-1:2010-01 EN ISO 11546-1:2009 (E) Foreword The text of ISO 11546-1:1995 has been prepared by Technical Committe

30、e ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11546-1:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by

31、publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CEN

32、ELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11546-1:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC D

33、irectives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Bel

34、gium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notic

35、e The text of ISO 11546-1:1995 has been approved by CEN as a EN ISO 11546-1:2009 without any modification. 3 DIN EN ISO 11546-1:2010-01 EN ISO 11546-1:2009 (E) 1 Scope This part of ISO 11546 specifies laboratory methods for the determination of the Sound insulation per- formante (insertion loss) of

36、small machine enclos- Ures. lt applies to a total enclosure only and not to the in- dividual Panels from which the enclosure is made. NOTES 1 Sound insulation for enclosure Panels such as wall el- ements, doors, windows, silencers, etc. should be measured in accordance with other relevant Standards.

37、 2 Related Standards concern noise-attenuation measure- ments of enclosures in sjtu (ISO 11546-2) and cabins (ISO 11957). The measurement methods specified in this part of ISO 11546 are based on International Standards in the series ISO 3740, ISO 9614 and ISO 11200 (see table 1). Depending on the me

38、thod Chosen, the Sound insulation Performance (insertion loss) of the enclos- ure is determined in terms of the reduction of Sound power level or Sound pressure level. Methods are given for measurements where the enclosure sur- rounds the actual Sound Source (machine). Where these methods are not pr

39、acticable, alternative measurements tan be performed using a reciprocity method (see definition 3.11 and subclause 7.2) or an artificial Sound Source. This part of ISO 11546 is applicable without any re- strictions to freestanding enclosures with volumes less than 2 m3. If the actual Sound Source is

40、 used, the Sound insulation Performance of enclosures with vol- umes exceeding. 2 m3 tan be determined provided that the requirements concerning maximum permiss- ible volume in the Standard used are fulfilled. The ac- tual Sound Source method is applicable for any kind of enclosure design, for examp

41、le enclosures fixed to the machine. When the reciprocity method or the artificial Sound Source method is used, the maximum volume of the enclosure is limited to 2 m3. These methods are not applicable to close-fitting enclosures. The wording “laboratory conditions” used in the title of this part of I

42、SO 11546 indicates that test conditions and test environment (indoor or outdoor) fully conform to the respective International Standards given in table 1. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of IS

43、O 11546. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this part of ISO 11546 are encouraged to investi- gate the possibility of applying the most recent edi- tions of the Standards indicated below. Members of

44、 IEC and ISO maintain registers of currently valid International Standards. 4 DIN EN ISO 11546-1:2010-01 EN ISO 11546-1:2009 (E) ISO 140-6: 1978, Acoustics - Measurement of Sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact Sound insulation of floors.

45、ISO 717-1 :-J, Acoustics - Rating of Sound insu- lation in buildings and of building elemen ts - Part 7: Airborne Sound insulation. ISO 3741:1988, Acoustics - Determination of Sound power levels of noise sources - Precision methods for broad-band sources in reverbera tion rooms. ISO 3742:1988, Acous

46、tics - Determination of Sound power levels of noise sources - Precision methods for discre te-frequency and narro w-band sources in reverbera tion rooms. ISO 3743-1 :1994, Acoustics - Determination of Sound power levels of noise sources - Engineering methods for small, movable sources in reverberant

47、 fields - Part 1: Comparison method for hard-walled tes t rooms. ISO 3743-2:1994, Acoustics - Determination of Sound power levels of noise sources using Sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverbera tion tes t rooms. ISO

48、 3744:1994, Acoustics - Determination of Sound power levels of noise sources using Sound pressure - Engineering method in an essentially free field over a reflecting plane. ISO 4871: -*), Acoustics - Declara tion and verifica- tion of noise emission values of machinery and equipmen t. ISO 9614-1 :19

49、93, Acoustics - Determination of Sound power levels of noise sources using Sound in- tensity - Part 1: Measuremen t at discrete Points. ISO 9614-2:-3), Acoustics - Determination of Sound power levels of noise sources using Sound intensity - Part 2: Measurement by scanning. ISO 11201 :1995, Acoustics - Noise emitted by ma- chinery and equipmen t - Measurement of emission Sound pressure levels at a work Station and at other specified positions - sentially free field over Engineering method in an es-