DIN EN ISO 11546-2-2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2 Measurements in situ (for acceptance and verification purposes) (ISO 11546.pdf

1、January 2010DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.01!$V“1565193ww

2、w.din.deDDIN EN ISO 11546-2Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)(ISO 11546-2:1995)English version of DIN EN ISO 11546-2:2010-01Akustik Bestimmung der Schalldmmung von Schallschutzkapseln Teil 2:

3、Messungen im Einsatzfall (zum Zweck der Abnahme und Nachprfung)(ISO 11546-2:1995)Englische Fassung DIN EN ISO 11546-2:2010-01SupersedesDIN EN ISO 11546-2:1996-06www.beuth.deDocument comprises 25 pagesDIN EN ISO 11546-2:2010-01 2 National foreword This standard has been prepared by Technical Committe

4、e ISO/TC 43 “Acoustics”, Subcommittee SC 1 “Noise” (Secretariat: DS, Denmark), Working Group WG 36 “Acoustics Methods for determination of the acoustical performance of noise attenuating devices” in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DS, Denmark). The respons

5、ible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA 001-02-02 AA Schallschutzeinrichtungen (Schall-dmpfer, Kapsel

6、n, elastische Lagerung). Amendment of the European Machinery Directive has made it necessary to review Annex Z in terms of the essential requirements of EU Directive 98/37/EC and the revised Directive, 2006/42/EC. The technical substance of the standard has not been changed. The DIN Standards corres

7、ponding to the International Standards referred to in this document are shown below. The IEC numbers are listed in the currently valid five-digit versions, although they are cited in the text by their last three or four digits only (i.e. without “60”). ISO 140-6 DIN EN ISO 140-6 ISO 9614-2 DIN EN IS

8、O 9614-2 ISO 717-1 DIN EN ISO 717-1 ISO 11201 DIN EN ISO 11201 ISO 3743-1 DIN EN ISO 3743-1 ISO 11202 DIN EN ISO 11202 ISO 3744 DIN EN ISO 3744 ISO 11204 DIN EN ISO 11204 ISO 3746 DIN EN ISO 3746 IEC 60651 DIN EN 61672 (all parts) ISO 3747 DIN EN ISO 3747 IEC 60804 DIN EN 61672 (all parts) ISO 4871

9、DIN EN ISO 4871 IEC 60942 DIN EN 60942 ISO 9614-1 DIN EN ISO 9614-1 IEC 61260 DIN EN 61260 The national standards are given in Annex NA “Bibliography”. Amendments This standard differs from DIN EN ISO 11546-2:1996-06 as follows: a) The German version of Table 1 has been brought in line with ISO 1154

10、6-2:1995. b) Annexes ZA and ZB have been supplemented to show the relationship between this standard and the Machinery Directive 98/37/EC and the new revised Machinery Directive 2006/42/EC. c) The standard has been editorially revised. Previous editions DIN EN ISO 11546-2: 1996-06 DIN EN ISO 11546-2

11、:2010-01 3 National Annex NA (informative) Bibliography DIN EN 60942, Electroacoustics Sound calibrators DIN EN 61260, Electroacoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN 61672-2, Electroacoustics Sound lev

12、el meters Part 2: Pattern evaluation tests DIN EN 61672-3, Electroacoustics Sound level meters Part 3: Periodic tests DIN EN ISO 140-6, Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors DIN EN ISO 717-

13、1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation DIN EN ISO 3743-1, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-wa

14、lled test rooms DIN EN ISO 3744, Acoustics Determination of sound power levels of noise sources using sound pres-sure Engineering method in an essential free field over a reflecting plane DIN EN ISO 3746, Acoustics Determination of sound power levels of noise sources using sound pres-sure Survey met

15、hod using an enveloping measurement surface over a reflecting plane DIN EN ISO 3747, Acoustics Determination of sound power levels of noise sources using sound pres-sure Comparison method in situ DIN EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipm

16、ent DIN EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using sound inten-sity Part 1: Measurement at discrete points DIN EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound inten-sity Part 2: Measurement by scanning DIN EN ISO 1120

17、1, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane DIN EN ISO 11202, Acoustics Noise emitted by machinery and equipment Measurem

18、ent of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections DIN EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified position

19、s Method requiring environmental corrections DIN EN ISO 11546-2:2010-01 4 This page is intentionally blank EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 11546-2August 2009ICS 17.140.01 Supersedes EN ISO 11546-2:1995 English VersionAcoustics - Determination of sound insulation performances of

20、enclosures - Part 2: Measurements in situ (for acceptance andverification purposes) (ISO 11546-2:1995)Acoustique - Dtermination de lisolement acoustique desencoffrements - Partie 2: Mesurages sur site (aux finsdacceptation et de vrification) (ISO 11546-2:1995)Akustik - Bestimmung der Schalldmmung vo

21、nSchallschutzkapseln - Teil 2: Messungen im Einsatzfall(zum Zweck der Abnahme und Nachprfung) (ISO 11546-2:1995)This European Standard was approved by CEN on 3 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

22、nStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, Fr

23、ench, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus,

24、Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EURO

25、PEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11546-2:2009: EContents Page Foreword3 1 Scope 4 2 Normative references 4

26、 3 Definitions 5 4 Choice of measurement method6 5 Instrumentation7 6 Test methods applicable to enclosures with the actual sound source 7 6.1 General7 6.2 Determination of sound power insulation 8 6.3 Determination of sound pressure insulation at a specified position.9 7 Test methods applicable to

27、enclosures without the actual sound source .9 7.1 General9 7.2 Artificial sound source method9 7.3 Weighted sound power insulation 10 7.4 Estimated noise insulation due to the enclosure for a specific noise spectrum 10 8 Uncertainty 10 9 Information to be recorded 10 9.1 Test object. 10 9.2 Test con

28、ditions . 10 9.3 Instrumentation. 11 9.4 Acoustical data . 11 9.5 Further information 11 10 Information to be reported. 11 Annex A (normative) Artificial sound source 12 Annex B (informative) Example of a source spectrum. 14 Annex C (informative) Guidelines for evaluating the applicability of differ

29、ent test environments for in situ measurements 15 Annex D (informative) Estimated noise insulation due to the enclosure for a specific noise spectrum 18 Annex E (informative) Bibliography . 19 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Dir

30、ective 98/37/EC.20 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC. 21 2 DIN EN ISO 11546-2:2010-01 EN ISO 11546-2:2009 (E) Foreword The text of ISO 11546-2:1995 has been prepared by Technical Committee ISO/TC 43 “Acoustics

31、” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11546-2:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an iden

32、tical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

33、 responsible for identifying any or all such patent rights. This document supersedes EN ISO 11546-2:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relatio

34、nship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus

35、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1154

36、6-2:1995 has been approved by CEN as a EN ISO 11546-2:2009 without any modification. 3 DIN EN ISO 11546-2:2010-01 EN ISO 11546-2:2009 (E) 1 Scope This part of ISO 11546 specifies in situ methods for the determination of the Sound insulation perform- ante (insertion loss) of machine enclosures. lt ap

37、plies to a total enclosure only and not to the in- dividual Panels from which the enclosure is made. NOTES 1 Sound insulation for enclosure Panels such as wall el- ements, doors, windows, silencers, etc. should be measured in accordance with other relevant Standards. 2 Related Standards concern nois

38、e-attenuation measure- ments of enclosures under laboratoty conditions (ISO 11546-1) and cabins (ISO 11957). The measurement methods specified in this part of ISO 11546 are based on International Standards in the series ISO 3740, ISO 9614 and ISO 11200 (see table 1). Depending on the method Chosen,

39、the Sound insulation Performance (insertion loss) of the enclos- ure is determined in terms of the reduction of Sound power level or Sound pressure level. Methods are given for measurements where the enclosure sur- rounds the actual Sound Source (machine). When these methods are not practicable, alt

40、ernative measurements tan be performed with an artificial Sound Source. Such methods are also described in this part of ISO 11546. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 11546. At the time of

41、publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreements based on this part of ISO 11546 are encouraged to investi- gate the possibility of applying the most recent edi- tions of the Standards indicated below. Members of IEC and ISO maintain re

42、gisters of currently valid International Standards. ISO 140-6: 1978, Acoustics - Measurement of Sound insulation in buildings and of building elemen ts - Part 6: Laboratory measurements of Impact Sound insulation of floors. ISO 717-1: -l), Acoustics - Rating of Sound insu- lation in buildings and of

43、 building elements - Part 1: Airborne Sound insulation. ISO 3743-1 :1994, Acoustics - Determination of Sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled tes t rooms. ISO 374411994, Acoustics - Determ

44、ination of Sound power levels of noise sources using Sound pressure - Engineering method in an essentially free field over a reflecting plane. 1) To be published. (Revision of ISO 717-1:1982 and ISO 717-3:1982) 4 DIN EN ISO 11546-2:2010-01 EN ISO 11546-2:2009 (E) ISO 3746:1995, Acoustics - Determina

45、tion of Sound power levels of noise sources using Sound pressure - Survey method using an enveloping measurement surface over a reflecting plane. ISO 3747:1987, Acoustics - Determination of Sound power levels of noise sources - Survey method us- ing a reference Sound Source. ISO 4871:- *, Acoustics

46、- Declara tjon and venfica- tion of noise emission values of machinery and equipmen t. ISO 9614-1 :1993, Acoustics - Determination of Sound power levels of noise sources using Sound in- tensity - Part 1: Measuremen t at discrete Points. ISO 9614-2:-3), Acoustics - Determination of Sound power levels

47、 of noise sources using Sound intensity - Part 2: Measurement by scanning. ISO 11201: 1995, Acoustics - Noise emitted by ma- chinery and equipment - Measurement of emission Sound pressure levels at a work Station and at other specified positions - Engineering method in an es- sentially free field ov

48、er a reflecting plane. ISO 11202:1995, Acoustics - Noise emitted by ma- chinery and equipment - Measurement of emission Sound pressure levels at a work Station and at other specified positions - Survey method in sjtu. ISO 11204: 1995, Acoustics - Noise emitted by ma- chinery and equipment - Measurem

49、ent of emission Sound pressure levels at a work Station and at other specified positions - Method requiring environ- mental corrections. I EC 651: 1979, Sound level meters. I EC 804: 1985, In tegra ting-averaging Sound level me ters. I EC 942: 1988, Sound calibrators. I EC 1 260:-4), Electroacoustics - Octave-band and fractional-octave-band filters. 3 Definitions For the purposes of this part of ISO 11546, the fol- lowing definitions apply. 2) To be published. (Revision of ISO 4871:1984)