DIN EN ISO 11664-5-2017 Colorimetry - Part 5 CIE 1976 L u v Colour space and u- v- uniform chromaticity scale diagram (ISO CIE 11664-5 2016) German version EN ISO 11664-5 2016《比色法 .pdf

1、January 2017 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.180.20!%_E“2605934www.din.deD

2、IN EN ISO 11664-5Colorimetry Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale diagram (ISO/CIE 116645:2016);English version EN ISO 116645:2016,English translation of DIN EN ISO 11664-5:2017-01Farbmetrik Teil 5: CIE 1976 L*u*v*Farbenraum und gleichabstndige u, vFarbtafel (ISO/

3、CIE 116645:2016);Englische Fassung EN ISO 116645:2016,Englische bersetzung von DIN EN ISO 11664-5:2017-01Colorimtrie Partie 5: Espace chromatique L*u*v* et diagramme de chromaticit uniforme u, v CIE 1976 (ISO/CIE 116645:2016);Version anglaise EN ISO 116645:2016,Traduction anglaise de DIN EN ISO 1166

4、4-5:2017-01SupersedesDIN EN ISO 116645:201107www.beuth.deDocument comprises 17 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17 DIN EN ISO 11664-5:2017-01 2 A comma is used as the decimal marker. National foreword This doc

5、ument (EN ISO 11664-5:2016) has been prepared by Technical Committee “CIE International Commission on Ilumination”. The international committee responsible for this document is Technical Committee ISO/TC 274 “Light and lighting” and at European level Technical Committee CEN/TC 139 “Paints and varnis

6、hes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Farbe (DIN Standards Committee Colour), NA 025-00-02 GA Gemeinschaftsarbeitsausschuss FNF/FNL: Farbmetrik. DIN EN ISO 11664, Coliometry, consists of the following parts: Part 1: CIE stan

7、dard colorimetric observers Part 2: CIE standard illuminants Part 3: CIE tristimulus values Part 4: CIE 1976 L*a*b* Colour space Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale diagram Part 6: CIEDE2000 Colour-difference formula The DIN Standards corresponding to the Interna

8、tional Standards referred to in this document are as follows: ISO 11664-1 DIN EN ISO 11664-1 ISO 11664-2 DIN EN ISO 11664-2 ISO 11664-4:2008 DIN EN ISO 11664-4:2012 ISO 11664-6 DIN EN ISO 11664-6 Amendments This standard differs from DIN EN ISO 11664-5:2011-07 as follows: a) ISO/TC 274 has slightly

9、revised the text; b) normative references have been updated; c) the address and the logo of CIE have been amended. Previous editions DIN 5033-3: 1951x-04, 1972-04, 1980-01, 1992-07 DIN EN ISO 11664-5: 2011-07 DIN EN ISO 11664-5:2017-01 3 National Annex NA (informative) Bibliography DIN EN ISO 11664-

10、1, Colorimetry Part 1: CIE standard colorimetric observers (ISO 11664-1) DIN EN ISO 11664-2, Colorimetry Part 2: CIE standard illuminants (ISO 11664-2) DIN EN ISO 11664-4:2012, Colorimetry Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) DIN EN ISO 11664-6, Colorimetry Part 6: CIEDE2000 Colou

11、r-difference formula (ISO/CIE 11664-6) DIN EN ISO 11664-5:2017-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11664-5 September 2016 ICS 17.180.20 Supersedes EN ISO 11664-5:2011English Version Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u, v

12、 uniform chromaticity scale diagram(ISO/CIE 11664-5:2016) Colorimtrie - Partie 5: Espace chromatique L*u*v* et diagramme de chromaticit uniforme u, v CIE 1976 (ISO/CIE 11664-5:2016) Farbmetrik - Teil 5: CIE 1976 L*u*v* Farbenraum und gleichabstndige u, v Farbtafel(ISO/CIE 11664-5:2016) This European

13、 Standard was approved by CEN on 1 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin

14、g such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into it

15、s own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

16、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

17、NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11664-5:2016 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms, definitio

18、ns, symbols and abbreviated terms . 63.1 Terms and definitions . 63.2 Symbols and abbreviated terms. 74 Calculation method 74.1 Uniform chromaticity scale diagram (UCS diagram) . 74.2 Uniform colour space 84.3 Correlates of lightness, saturation, chroma and hue 94.4 Colour differences . 10Annex A (i

19、nformative) Reverse transformation 12Bibliography . 13Contents PageDIN EN ISO 11664-5:2017-01 EN ISO 11664-5:2016 (E)2Foreword .4European foreword This document (EN ISO 11664-5:2016) has been prepared by Technical Committee ISO/TC 274 “Light and lighting“ in collaboration with Technical Committee CE

20、N/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the la

21、test by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11664-5:2011. According to the CEN

22、-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

23、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/CIE 11664-5:2016 has been approved by CEN as EN ISO 11664-5:2016 without

24、 any modification. DIN EN ISO 11664-5:2017-01 EN ISO 11664-5:2016 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO techni

25、cal committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely w

26、ith the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed

27、 for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

28、hts. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in thi

29、s document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles i

30、n the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 274, Light and lighting.This first edition of ISO/CIE 11664-5 cancels and replaces ISO 11664-5:2009, of which it constitutes a minor revision. (ISO 11664

31、-5:2009 was prepared by CIE Technical Committee TC 1-57 of Division 1.)ISO 11664 consists of the following parts, under the general title Colorimetry: Part 1: CIE standard colorimetric observers Part 2: CIE standard illuminants Part 3: CIE tristimulus values Part 4: CIE 1976 L*a*b* Colour spaceISO/C

32、IE 11664 consists of the following parts, under the general title Colorimetry: Part 5: CIE 1976 L*u*v* colour space and u, v uniform chromaticity scale diagram Part 6: CIEDE2000 Colour-difference formulaDIN EN ISO 11664-5:2017-01 EN ISO 11664-5:2016 (E)4 IntroductionThe three-dimensional colour spac

33、e produced by plotting CIE tristimulus values (X, Y, Z) in rectangular coordinates is not visually uniform nor is the (x,y,Y) space nor the two-dimensional CIE x,y chromaticity diagram. Equal distances in these spaces and diagrams do not represent equally perceptible differences between colour stimu

34、li. For this reason, in 1976, the CIE introduced and recommended two new spaces (known as CIELAB and CIELUV) whose coordinates are non-linear functions of X, Y and Z. The recommendation was put forward in an attempt to unify the then very diverse practice in uniform colour spaces and associated colo

35、ur difference formulae.28Both these more-nearly uniform colour spaces have become well accepted and widely used. Numerical values representing approximately the relative magnitude of colour differences can be described by simple Euclidean distances in the spaces or by more sophisticated formulae tha

36、t improve the correlation with the relative perceived size of differences. The purpose of this part of ISO/CIE 11664 is to define procedures for calculating the coordinates of the CIE 1976 L*u*v* (CIELUV) colour space and the Euclidean colour difference values based on these coordinates. This part o

37、f ISO/CIE 11664 also defines a related chromaticity diagram that is a projection of the CIE x,y chromaticity diagram maintaining straight lines of dominant and complementary wavelengths. This part of ISO/CIE 11664 does not cover the alternative uniform colour space, CIELAB,5nor does it cover more so

38、phisticated colour difference formulae based on CIELAB, such as the CMC formula,3the CIE 94 formula,1the DIN 99 formula,4and the CIEDE2000 formula.6DIN EN ISO 11664-5:2017-01 EN ISO 11664-5:2016 (E)5 1 ScopeThis part of ISO/CIE 11664 specifies the method of calculating the coordinates of the CIE 197

39、6 L*u*v* colour space including correlates of lightness, chroma, saturation and hue. It includes two methods for calculating Euclidean distances in this space to represent the relative perceived magnitude of colour differences. It also specifies the method of calculating the coordinates of the u,v u

40、niform chromaticity scale diagram.This part of ISO/CIE 11664 is applicable to tristimulus values calculated using the colour-matching functions of the CIE 1931 standard colorimetric system or the CIE 1964 standard colorimetric system. This part of ISO/CIE 11664 may be used for the specification of c

41、olour stimuli perceived as belonging to a reflecting or transmitting object, where a three-dimensional space more uniform than tristimulus space is required. This includes self-luminous displays, like cathode ray tubes, if they are being used to simulate reflecting or transmitting objects and if the

42、 stimuli are appropriately normalized. This part of ISO/CIE 11664, as a whole, does not apply to colour stimuli perceived as belonging to an area that appears to be emitting light as a primary light source or that appears to be specularly reflecting such light. Only the u,v uniform chromaticity scal

43、e diagram defined in 4.1 and the correlates of hue and saturation defined in 4.3 apply to such colour stimuli.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edit

44、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 116641/CIE S 014-1, Colorimetry Part 1: CIE standard colorimetric observersISO 116642/CIE S 014-1, Colorimetry Part 2: CIE standard illuminantsCIE S 017, ILV: International

45、 Lighting Vocabulary3 Terms, definitions, symbols and abbreviated terms3.1 Terms and definitionsFor the purposes of this document, the terms and definitions given in CIE S 017 apply.DIN EN ISO 11664-5:2017-01 EN ISO 11664-5:2016 (E)6 3.2 Symbols and abbreviated termsX, Y, Z tristimulus values of a t

46、est stimulus calculated using the colour-matching functions of the CIE 1931 standard colorimetric system (also known as the CIE 2 standard colorimet-ric system)Yntristimulus value, Y, of a specified white colour stimulus calculated using the colour-matching functions of the CIE 1931 standard colorim

47、etric systemx, y chromaticity coordinates of a test stimulus calculated using the colour-matching functions of the CIE 1931 standard colorimetric systemL* CIELUV lightnessu*, v* CIELUV u*,v* coordinatesu, v CIE 1976 chromaticity coordinatesuvnn,CIE 1976 chromaticity coordinates of a specified white

48、stimulussuvCIELUV saturationCuv*CIELUV chromahuvCIELUV hue angle(u,v) CIELUV chromaticity differenceL* CIELUV lightness differenceu*, v* CIELUV u*,v* differencesCuv*CIELUV chroma differencehuvCIELUV hue angle differenceHuv*CIELUV hue differenceEuv*CIELUV colour differenceIf the character “” is not available, it may be replaced by the character “D”.The terms “CIE 1976 L*u*v*” and “C