DIN EN ISO 1179-1-2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 Threaded ports (.pdf

1、March 2014 Translation by DIN-Sprachendienst.English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

2、3.100.40!%,k“2097291www.din.deDDIN EN ISO 1179-1Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric ormetal-to-metal sealing Part 1: Threaded ports (ISO 1179-1:2013);English version EN ISO 1179-1:2013,English translation of DIN EN ISO 1179-1:2014-0

3、3Leitungsanschlsse fr allgemeine Anwendung und Fluidtechnik Einschraublcher und Einschraubzapfen mit Gewinde nach ISO 228-1 undElastomerdichtung oder metallener Dichtkante Teil 1: Einschraublcher (ISO 1179-1:2013);Englische Fassung EN ISO 1179-1:2013,Englische bersetzung von DIN EN ISO 1179-1:2014-0

4、3Raccordements pour applications gnrales et transmissions hydrauliques etpneumatiques Orifices et lments mles filetage ISO 228-1 joint en lastomre ou tanchit mtalsur mtal Partie 1: Orifices filets (ISO 1179-1:2013);Version anglaise EN ISO 1179-1:2013,Traduction anglaise de DIN EN ISO 1179-1:2014-03S

5、upersedesDIN EN ISO 1179-1:2008-08www.beuth.deDocument comprises 14 pagesIn case of doubt, the German-language original shall be considered authoritative.02.14 DIN EN ISO 1179-1:2014-03 2 A comma is used as the decimal marker. National foreword The text of ISO 1179-1:2013 has been prepared by Techni

6、cal Committee ISO/TC 131 “Fluid power systems” and has been taken over as EN ISO 1179-1:2013 by Technical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Rohrleitungen und Dam

7、pfkesselanlagen (Piping and Boiler Plant Standards Committee), Working Committee NA 082-00-07 AA Rohrverschraubungen. This document supersedes DIN EN ISO 1179-1:2008-08. DIN EN ISO 1179 consists of the following parts under the general title Connections for general use and fluid power Ports and stud

8、 ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing: Part 1: Threaded ports Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) Part

9、4: Stud ends for general use only with metal-to-metal sealing (type B) The DIN Standards corresponding to the International Standards referred to in Clause 2 of this standard are as follows: ISO 228-1 DIN EN ISO 228-1 ISO 1179-2 DIN EN ISO 1179-2 ISO 1179-3 DIN EN ISO 1179-3 ISO 1179-4 DIN EN ISO 11

10、79-4 Amendments This standard differs from DIN EN ISO 1179-1:2008-08 as follows: a) in Table 1, the dimensions of thread size G 2 have been changed; b) Annex A (informative) “Port depths from ISO 1179:1981 used in pneumatic applications where stud ends interface with ISO 7-1 male taper threads” has

11、been added; c) the standard has been editorially revised. Previous editions DIN EN ISO 1179-1: 2008-08 DIN EN ISO 1179-1:2014-03 3 National Annex NA (informative) Bibliography DIN EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and de

12、signation DIN EN ISO 1179-2, Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) DIN EN ISO 1179-3, Connections for genera

13、l use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) DIN EN ISO 1179-4, Connections for general use and fluid power Ports and stud ends with ISO 2

14、28-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) DIN EN ISO 1179-1:2014-03 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1179-1 November 2013 ICS 23.100.40 Supersedes EN I

15、SO 1179-1:2008English Version Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) Raccordements pour applications gnrales et transmissions hydrauliques et pneumatiques - Orifice

16、s et lments mles filetage ISO 228-1 joint en lastomre ou tanchit mtal sur mtal - Partie 1: Orifices filets (ISO 1179-1:2013) Leitungsanschlsse fr allgemeine Anwendung und Fluidtechnik - Einschraublcher und Einschraubzapfen mit Gewinde nach ISO 228-1 und Elastomerdichtung oder metallener Dichtkante -

17、 Teil 1: Einschraublcher(ISO 1179-1:2013) This European Standard was approved by CEN on 12 October 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

18、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

19、ranslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

20、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZA

21、TION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1179-1:2013 EContents PageForeword .3Intro

22、duction 41 Scope . 52 Normative references 53 Terms and definitions . 64 Dimensions . 65 Test methods . 76 Designation of ports 77 Identification statement (reference to this part of ISO 1179) . 7Annex A (informative) Port depths from ISO 1179:1981 used in pneumatic applications where stud ends inte

23、rface with ISO 7-1 male taper threads . 9Bibliography . 10DIN EN ISO 1179-1:2014-03 EN ISO 1179-1:2013 (E) 2 DIN EN ISO 1179-1:2014-03 EN ISO 1179-1:2013 (E) 3Foreword This document (EN ISO 1179-1:2013) has been prepared by Technical Committee ISO/TC 131 “Fluid power systems” in collaboration with T

24、echnical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2014, and conflicting nation

25、al standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN

26、 ISO 1179-1:2008. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mace

27、donia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 1179-1:2013 has been approved by C

28、EN as EN ISO 1179-1:2013 without any modification. IntroductionIn fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within a circuit. In general applications, a fluid can be conveyed under pressure. Components are connected through their threaded

29、 ports by fluid conductor connectors to tubes and pipes or to hose fittings and hoses.Ports are an integral part of fluid power components, such as pumps, motors, valves, cylinders, etc.For threaded ports and stud ends specified in new designs in hydraulic fluid power applications, ISO/TC 131/SC 4 r

30、ecommends that the ISO 6149 series be used because these International Standards specify ports and stud ends with metric threads and O-ring sealing and because the subcommittee would like to help users by recommending one preferred system. ISO/TC 131/SC 4 further recommends that threaded ports and s

31、tud ends in accordance with the ISO 1179 series, ISO 9974 series and ISO 11926 series not be used for new designs in hydraulic fluid power applications; these International Standards will be maintained because they specify ports and stud ends that are currently used in hydraulic systems worldwide.Fo

32、r threaded ports and stud ends specified in new designs in pneumatic fluid power applications, ISO/TC 131/SC 4 recommends that ISO 16030 be used, except where products are to interface with ISO 7-1 threads, because the subcommittee would like to help users by recommending one preferred system. ISO/T

33、C 131/SC 4 further recommends that threaded ports and stud ends in accordance with the ISO 1179 series not be used for new designs in pneumatic fluid power applications; these International Standards will be maintained because they specify ports and stud ends that are currently used in pneumatic sys

34、tems worldwide.Significant testing over more than 35 years of use has confirmed the performance requirements of connection ends made from carbon steel. The stud end connections specified in ISO 1179-2, ISO 1179-3 and ISO 1179-4 apply to connectors detailed in ISO 8434-1, ISO 8434-2 and ISO 8434-41).

35、1) Withdrawn.DIN EN ISO 1179-1:2014-03 EN ISO 1179-1:2013 (E) 4 CAUTION The use of ports conforming to this part of ISO 1179 with stud ends conforming to the relevant parts of ISO 6149, ISO 9974 and ISO 11926 could lead to a hazardous situation.1 ScopeThis part of ISO 1179 specifies dimensions for p

36、orts with ISO 228-1 threads for use with non-adjustable stud ends described in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends described in ISO 1179-3.Ports in accordance with this part of ISO 1179 are applicable for use with ISO 1179-2 heavy-duty (S series) stud ends with type E

37、 sealing at working pressures up to 63 MPa (630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar), ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa (315 bar) and ISO 1179-3 light-duty (L series) adjustable stud ends

38、 with type H sealing at working pressures up to 20 MPa (200 bar), and ISO 1179-4 stud ends with type B sealing at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series,except for the G2 size port, which in hyd

39、raulic fluid power systems is used mainly with accumulators and for which ISO 1179-3 and ISO 1179-4 do not specify stud ends. The permissible working pressure depends upon size, materials, design, working conditions, application, etc.Users of this part of ISO 1179 should ensure that there is suffici

40、ent material around the port to maintain the pressure.NOTE The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new designs in hydraulic and pneumatic fluid power applications.2 Normative referencesThe following documents, in whole or in part, are no

41、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 228-1, Pipe threads where pressure-tight joints are not

42、made on the threads Part 1: Dimensions, tolerances and designationISO 1179-2, Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metaltometal sealing Part 2: Heavyduty (S series) and lightduty (L series) stud ends with elastomeric sealing (type

43、 E)ISO 1179-3, Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metaltometal sealing Part 3: Lightduty (L series) stud ends with sealing by Oring with retaining ring (types G and H)DIN EN ISO 1179-1:2014-03 EN ISO 1179-1:2013 (E) 5 ISO 1179-4

44、, Connections for general use and fluid power Ports and stud ends with ISO 2281 threads with elastomeric or metaltometal sealing Part 4: Stud ends for general use only with metaltometal sealing (type B)ISO 5598, Fluid power systems and components Vocabulary3 Terms and definitionsFor the purposes of

45、this document, the terms and definitions given in ISO 5598 apply.4 DimensionsPorts shall conform to the dimensions shown in Figure 1 and given in Table 1.Dimensions in millimetres/Surface roughness values in micrometresKey1 thread pitch diameteraThread.bDimension L3applies when the tap drill cannot

46、pass through entire boss.Figure 1 ISO 1179-1 portDIN EN ISO 1179-1:2014-03 EN ISO 1179-1:2013 (E) 6 Table 1 Dimensions for ISO 1179-1 portsDimensions in millimetresThreadd1ad2d3d4bmin. L1L2L3cWref. nom. tol. Type N (narrow) Type W (wide) max. min. min.G 1/8 4,5 9,8+020,15 17,2 1 8,5 10,5 0,1G 1/4 7,

47、5 13,2 20 20,7 1,5 12,5 15,5 0,1G 3/8 9 16,7 23 24,5 2 12,5 15,5 0,1G 1/2 14 21 28 29,6 2,5 15 19 0,1G 3/4 18 26,5 33 36,9 2,5 16,5 20,5 0,2G 1 23 33,3+030,41 46,1 2,5 19 24 0,2G 1 1/4 30 42 51 54 2,5 21,5 26,5 0,2G 1 1/2 36 47,9 56 60,5 2,5 22,5 27,5 0,2G 2 d47 59,7 76 3 26 31 0,2aSize and dimensions in accordance with ISO 228-1.bType N corresponds to the spot face to be used with male stud end types B and E in ISO 1179-2 and