DIN EN ISO 12402-10-2006 Personal flotation devices - Part 10 Selection and application of personal flotation devices and other relevant devices (ISO 12402-10 2006) English version.pdf

1、 DEUTSCHE NORMMay 2006DIN EN ISO 12402-10 ICS 13.340.70 Supersedes DIN-Fachbericht 70:1998 Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) English version of DIN EN ISO 12402-10:2006-05 Persnliche Auftriebsmit

2、tel Teil 10: Auswahl und Anwendung von persnlichen Auftriebsmitteln und anderen entsprechenden Gerten (ISO 12402-10:2006) Englische Fassung DIN EN ISO 12402-10:2006-05 Document comprises 27 pages No part of this standard may be reproduced without prior permission of DIN Deutsches Institut fr Normung

3、 e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 13 www.din.de www.beuth.de !,nw“11.06 9758495DIN EN ISO 12402-10:2006-05 2 Start of validity This standard is valid from 1 May 2006. National foreword This

4、 standard has been published in accordance with a decision taken by CEN/TC 162 to adopt, without alteration, International Standard ISO 12402-10 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Sport- und Freizeitgert (Sports Equipment Standards

5、 Committee), Technical Committee NA 112-04-04 AA Wasserrettungs- und Sicherheitsmittel. This standard contains specifications of DIN-Fachbericht 70:1998, which represents the German version of CEN Report CR 13033:1997. DIN EN ISO 12402 consists of the following parts, under the general title Persona

6、l flotation devices: Part 1: Lifejackets for seagoing ships Safety requirements Part 2: Lifejackets, performance level 275 Safety requirements (currently at draft stage) Part 3: Lifejackets, performance level 150 Safety requirements (currently at draft stage) Part 4: Lifejackets, performance level 1

7、00 Safety requirements (currently at draft stage) Part 5: Buoyancy aids (level 50) Safety requirements (currently at draft stage) Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods (currently at draft stage) Part 7: Materials and components Safety r

8、equirements and test methods (currently at draft stage) Part 8: Accessories Safety requirements and test methods Part 9: Test methods (currently at draft stage) Part 10: Selection and application of personal flotation devices and other relevant devices The DIN Standards corresponding to the Internat

9、ional Standards referred to in clause 2 of the EN are as follows: ISO 12401 DIN EN 1095 ISO 12402-1 DIN EN ISO 12402-1 ISO 12402-2 E DIN EN ISO 12402-2 ISO 12402-3 E DIN EN ISO 12402-3 ISO 12402-4 E DIN EN ISO 12402-4 ISO 12402-5 E DIN EN ISO 12402-5 ISO 12402-6 E DIN EN ISO 12402-6 ISO 12402-7 E DI

10、N EN ISO 12402-7 DIN EN ISO 12402-10:2006-05 3 ISO 12402-8 DIN EN ISO 12402-8 ISO 12402-9 E DIN EN ISO 12402-9 ISO 15027-1 DIN EN ISO 15027-1 ISO 15027-2 DIN EN ISO 15027-2 ISO 15027-3 DIN EN ISO 15027-3 Amendments This standard differs from DIN-Fachbericht 70:1998-01 as follows: a) Figures and over

11、views for the selection and application of personal flotation devices and other relevant devices have been included. b) Specifications for risk assessment have been included. c) Specifications from other standards of the DIN EN ISO 12402 series have been taken into account. Previous editions DIN-Fac

12、hbericht 70: 1998-01 National Annex NA (informative) Bibliography DIN EN 1095, Deck safety harness and safety line for use on recreational craft Safety requirements and test methods DIN EN ISO 15027-1, Immersion suits Part 1: Constant wear suits Requirements including safety DIN EN ISO 15027-2, Imme

13、rsion suits Part 2: Abandonment suits Requirements including safety DIN EN ISO 15027-3, Immersion suits Part 3: Test methods EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12402-10 February 2006 ICS 13.340 Supersedes CR 13033:1997 English Version Personal flotation devices - Part 10: Selec

14、tion and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) Equipements individuels de flottabilit - Partie 10: Slection et application des quipements individuels de flottabilit et dautres quipements pertinents (ISO 12402-10:2006) Persnliche Auftriebsmittel - Te

15、il 10: Auswahl und Anwendung von persnlichen Auftriebsmitteln und anderen entsprechenden Gerten (ISO 12402-10:2006) This European Standard was approved by CEN on 6 February 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

16、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Eng

17、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, C

18、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E

19、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12402-10:2006: EEN ISO 12402-10:2006 (E) 2 Foreword This documen

20、t (EN ISO 12402-10:2006) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets“, the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 188 “Small craft“. This European Standard shall be given the

21、 status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the latest by August 2006. This document supersedes CR 13033:1997. This document has been prepared under a mandate give

22、n to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the nat

23、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P

24、ortugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 12402-10:2006 (E) 3 Contents Page Foreword .2 Introduction.4 1 Scope6 2 Normative references6 3 Terms and definitions .7 4 Classification, risks and recommended areas of application of PFDs9 4.1 General .9 4.

25、2 Performance criteria11 4.3 Performance levels12 4.4 Selection and use13 5 Essential items to be observed by legislative authorities, manufacturers, retailers and users .15 5.1 Personal flotation devices (PFDs) .15 5.2 Accessories .16 5.3 Immersion suits .17 6 Guidance for drowning risk management

26、18 6.1 General .18 6.2 Description of operation and environment.18 6.3 Identification of risk areas and establishment of safety levels 18 6.4 Guidance on identification of risk managing measures .18 6.5 Guidance on selection of risk managing measures 19 6.6 Guidance on selection of personal protecti

27、ve equipment20 6.7 Checklists.20 Annex A (informative) List of terms defined in ISO 15027-1.22 Annex ZA (informative) Relationship between this Standard and the Essential Requirements of EU Directive 89/686 EEC.24 EN ISO 12402-10:2006 (E) 4 Introduction ISO 12402 has been prepared to give guidance o

28、n the design and application of personal flotation devices (hereafter referred to as PFDs) for persons engaged in activities, whether in relation to their work or their leisure, in or near water. PFDs manufactured, selected, and maintained to this standard should give a reasonable assurance of safet

29、y from drowning to a person who is immersed in water. Requirements for lifejackets on large, commercial seagoing ships are regulated by the International Maritime Organisation (IMO) under the International Convention for the Safety of Life at Sea (SOLAS). ISO 12402-1 addresses lifejackets for seagoi

30、ng ships. ISO 12402 allows for the buoyancy of a PFD to be provided by a wide variety of materials or designs, some of which may require preparation before entering the water (e.g. inflation of chambers by gas from a cylinder or blown in orally). However, PFDs can be divided into the following two m

31、ain classes: those which provide face up in-water support to the user regardless of physical conditions (lifejackets), and those which require the user to make swimming and other postural movements to position the user with the face out of the water (buoyancy aids). Within these main two classes the

32、re are a number of levels of support, types of buoyancy, activation methods for inflatable devices, and auxiliary items (such as location aids), all of which will affect the users probability of survival. Within the different types of buoyancy allowed, inflatable PFDs either provide full buoyancy wi

33、thout any user intervention other than arming (i.e. PFDs inflated by a fully automatic method) or require the user to initiate the inflation. Hybrid PFDs always provide some buoyancy but rely on the same methods as inflatable PFDs to achieve full buoyancy. With inherently buoyant PFDs, the user only

34、 needs to put the PFD on to achieve the performance of its class. PFDs that do not require intervention (automatically operating PFDs) are suited to activities where persons are likely to enter the water unexpectedly; whereas PFDs requiring intervention (e.g. manually inflated PFDs) are only suitabl

35、e for use if the user believes there will be sufficient time to produce full buoyancy, or help is close at hand. In every circumstance, the user should ensure that the operation of the PFD is suited to the specific application. The conformity of a PFD to this part of ISO 12402 does not imply that it

36、 is suitable for all circumstances. The relative amount of required inspection and maintenance is another factor of paramount importance in the choice and application of specific PFDs. ISO 12402 is intended to serve as a guide to manufacturers, purchasers, and users of such safety equipment in ensur

37、ing that the equipment provides an effective standard of performance in use. Equally essential is the need for the designer to encourage the wearing of the equipment by making it comfortable and attractive for continuous wear on or near water, rather than for it to be stored in a locker for emergenc

38、y use. Throwable devices and flotation cushions are not covered by this part of ISO 12402. The primary function of a PFD is to support the user in reasonable safety in the water. Within the two classes, alternative attributes make some PFDs better suited to some circumstances than others or make the

39、m easier to use and care for than others. Important alternatives allowed by ISO 12402 are the following: to provide higher levels of support (levels 100, 150, or 275) that generally float the user with greater water clearance, enabling the users efforts to be expended in recovery rather than avoidin

40、g waves; or to provide lighter or less bulky PFDs (levels 50 to 100); to provide the kinds of flotation (inherently buoyant foam, hybrid, and inflatable) that will accommodate the sometimes conflicting needs of reliability and durability, in-water performance, and continuous wear; EN ISO 12402-10:20

41、06 (E) 5 to provide automatically operating (inherently buoyant or automatically inflated) PFDs that float users without any intervention on their part, except in initially donning the PFD (and regular inspection and rearming of inflatable types), or to provide user control of the inflatable PFDs bu

42、oyancy by manual and oral operation; and to assist in detection (location aids) and recovery of the user. PFDs provide various degrees of buoyancy in garments that are light in weight and only as bulky and restrictive as needed for their intended use. They will need to be secure when worn, in order

43、to provide positive support in the water and to allow the user to swim or actively assist herself/himself or others. The PFD selected shall ensure that the user is supported with the mouth and nose clear of the water under the expected conditions of use and the users ability to assist. Under certain

44、 conditions (such as rough water and waves), the use of watertight and multilayer clothing, which provide (intentionally or otherwise) additional buoyancy, or the use of equipment with additional weight (such as tool belts) will likely alter the performance of the PFD. Users, owners and employers ne

45、ed to ensure that this is taken into account when selecting a PFD. Similarly, PFDs may not perform as well in extremes of temperature, although fully approved under this part of ISO 12402. PFDs may also be affected by other conditions of use, such as chemical exposure and welding, and may require ad

46、ditional protection to meet the specific requirements of use. If the user intends taking a PFD into such conditions, she/he has to be assured that the PFD will not be adversely affected. This part of ISO 12402 also allows a PFD to be an integral part of a safety harness designed to conform to ISO 12

47、401, or an integral part of a garment with other uses, for example to provide thermal protection during immersion, in which case the complete assembly as used is required to conform to this part of ISO 12402. In compiling the attributes required of a PFD, consideration has also been given to the pot

48、ential length of service that the user might expect. Whilst a PFD needs to be of substantial construction and material, its potential length of service often depends on the conditions of use and storage, which are the responsibility of the owner, user and/or employer. Furthermore, whilst the perform

49、ance tests included are believed to assess relevant aspects of performance in real-life use, they do not accurately simulate all conditions of this. For example, the fact that a device passes the self-righting tests in swimming attire, as described herein, does not guarantee that it will self-right an unconscious user wearing waterproof clothing; neither can it be expected to completely protect the airway of an unconscious person in rough water. Waterproof clothing can trap air and further impede th