DIN EN ISO 12625-5-2017 Tissue paper and tissue products - Part 5 Determination of wet tensile strength (ISO 12625-5 2016) German version EN ISO 12625-5 2016《薄纸和薄纸制品 第5部分 湿抗拉强度的测定(.pdf

1、March 2017 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 85.080.20!%c+“2640808www.din.deDIN

2、 EN ISO 12625-5Tissue paper and tissue products Part 5: Determination of wet tensile strength (ISO 126255:2016);English version EN ISO 126255:2016,English translation of DIN EN ISO 12625-5:2017-03TissuePapier und TissueProdukte Teil 5: Bestimmung der breitenbezogenen Nassbruchkraft (ISO 126255:2016)

3、;Englische Fassung EN ISO 126255:2016,Englische bersetzung von DIN EN ISO 12625-5:2017-03Papier tissue et produits tissue Partie 5: Dtermination de la rsistance la rupture par traction ltat humide (ISO 126255:2016);Version anglaise EN ISO 126255:2016,Traduction anglaise de DIN EN ISO 12625-5:2017-03

4、SupersedesDIN EN ISO 126255:200509www.beuth.deDocument comprises 23 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.17 DIN EN ISO 12625-5:2017-03 2 A comma is used as the decimal marker. Nationales Vorwort This document (EN

5、ISO 126255:2016) has been prepared by Working Committee WG 8 “Test methods for soft tissue papers” (Secretariat: DIN, Germany) of Technical Committee CEN/TC 172 “Pulp, paper and board” in collaboration with Technical Committee ISO/TC 6 “Paper, board and pulps”. The secretariat of CEN/TC 172 is held

6、by DINNormenausschuss Paper, Pappe und Faserstoff (DIN Standards Committee Paper, board and pulps). The responsible German body involved in its preparation was DIN-Normenausschuss Papier, Pappe und Faserstoff (DIN Standards Committee Paper, Board and Pulps). Working Committee NA 0740205 AA “Test met

7、hods for tissue paper and tissue products”. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 186 DIN EN ISO 186 ISO 187 DIN EN 20187 ISO 287 DIN EN ISO 287 ISO 638 DIN EN ISO 638 ISO 1924-2 DIN EN ISO 1924-2 ISO 5725-1 DIN ISO 5725-1 ISO

8、 7500-1 DIN EN ISO 7500-1 ISO 12625-1 DIN EN ISO 12625-1 ISO 12625-4 DIN EN ISO 12625-4 ISO 15755 DIN EN ISO 15755 Amendments This standard differs from DIN EN ISO 126255:200509 as follows: a) in Clause 7, a more detailed description of the preparation of the test pieces has been included; b) in Cla

9、use 8, the measurement procedure has been clarified; c) in Clause 10, additional information has been included in the test report; d) in Annex A, the precision data has been rendered more precise; e) the standard has been editorially revised. Previous editions DIN 54540-8: 1989-06 DIN EN 12625-5: 19

10、99-03 DIN EN ISO 12625-5: 2005-09 DIN EN ISO 12625-5:2017-03 3 National Annex NA (informative) Bibliography DIN EN 20187, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples DIN EN ISO 186, Paper and board Sa

11、mpling to determine average quality DIN EN ISO 287, Paper and board Determination of moisture content of a lot Oven-drying method DIN EN ISO 638, Paper, board and pulps Determination of dry matter content Oven-drying method DIN EN ISO 19242, Paper and board Determination of tensile properties Part 2

12、: Constant rate of elongation method (20 mm/min) DIN EN ISO 75001, Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system DIN EN ISO 126251, Tissue paper and tissue pr

13、oducts Part 1: General guidance on terms DIN EN ISO 126254, Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption DIN EN ISO 15755, Paper and board Estimation of contraries DIN ISO 57251, Accuracy (trueness and precision) o

14、f measurement methods and results Part 1: General principles and definitions DIN EN ISO 12625-5:2017-03 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12625-5 December 2016 ICS 85.060 Supersedes EN ISO 12625-5:2005English Version Tissue paper and tissue p

15、roducts - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) Papier tissue et produits tissue - Partie 5: Dtermination de la rsistance la rupture par traction ltat humide (ISO 12625-5:2016) Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen Nassbruchkraft (ISO

16、12625-5:2016) This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

17、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon

18、sibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

19、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMA

20、LISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12625-5:2016 EEuropean foreword .31 Scope . 52 Normative references 5

21、3 Terms and definitions . 54 Principle 65 Apparatus . 66 Conditioning 97 Preparation 97.1 General . 97.2 Accelerated ageing (curing) . 97.3 Dimensions 107.3.1 Vertical testing apparatus . 107.3.2 Horizontal testing apparatus . 107.4 Number of test pieces 108 Procedure 108.1 Calibration and adjustmen

22、t of the testing apparatus . 108.2 Vertical test method . 118.2.1 Mounting the Finch Cup soaking device . 118.2.2 Measurement . 118.3 Horizontal test method . 128.3.1 Measurement . 129 Calculation . 139.1 General 139.2 Wet tensile strength . 139.3 Wet tensile strength retention 1410 Test report 14An

23、nex A (informative) Precision 15Bibliography .19Contents PageDIN EN ISO 12625-5:2017-03 EN ISO 12625-5:2016 (E) 2Foreword 4European foreword This document (EN ISO 12625-5:2016) has been prepared by Technical Committee ISO/TC 6 “Paper, board and pulps“ in collaboration with Technical Committee CEN/TC

24、 172 “Pulp, paper and board” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest

25、 by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12625-5:2005. According to the CEN-CENE

26、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic

27、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12625-5:2016 has been approved by CEN as EN ISO 12625-5:2016 without any modi

28、fication. DIN EN ISO 12625-5:2017-03 EN ISO 12625-5:2016 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical commi

29、ttees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the I

30、nternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

31、different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO

32、shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this documen

33、t is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Tec

34、hnical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 172, Pulp, paper and board, in collaboration with ISO Technical Committee TC 6, Paper, board and pulps, Subcom

35、mittee SC 2, Test methods and quality specifications for paper and board, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 12625-5:2005), which has been technically revised with the follow

36、ing changes:a) in Clause 7, a more detailed description of the preparation of the test pieces was included;b) in Clause 8, the procedure for measurement was clarified;c) in Clause 10, additional information is to be included in the test report;d) more detailed precision data in Annex A;e) this docum

37、ent has been editorially updated.A list of all parts in the ISO 12625 series can be found on the ISO website.DIN EN ISO 12625-5:2017-03 EN ISO 12625-5:2016 (E) 4 1 ScopeThis document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after s

38、oaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies

39、for both. For vertical tensile-strength-testing apparatus, a device which is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the clamps.In cas

40、es where impurities and contraries have to be determined, ISO 157556applies for these detections in tissue paper and tissue products.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. Fo

41、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 186, Paper and board Sampling to determine average qualityISO 187, Paper, board and pulps Standard atmosphere for conditioning and testing

42、and procedure for monitoring the atmosphere and conditioning of samplesISO 1924-2, Paper and board Determination of tensile properties Part 2: Constant rate of elongation method (20 mm/min)ISO 7500-1, Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension

43、/compression testing machines Calibration and verification of the force-measuring system3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 12625-1 and the following apply.ISO and IEC maintain terminological databases for use in standardization at the fol

44、lowing addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1wet tensile strengthmaximum tensile force per unit width that a test piece soaked with water will withstand before breaking in a tensile testNote 1 to entry

45、: The wet tensile strength is expressed in newtons per metre (N/m).DIN EN ISO 12625-5:2017-03 EN ISO 12625-5:2016 (E)5 3.2wet-tensile-strength retentionratio, expressed as a percentage, of the tensile strength of the wet test piece to the tensile strength of a different test piece from the same samp

46、le in the dry, conditioned stateNote 1 to entry: According to ISO 187.4 PrincipleA test piece of tissue paper or tissue product of given dimensions, soaked in water for a given period of time under specified conditions, is stretched (elongated) to break at a constant rate of elongation, using a tens

47、ile-strength-testing apparatus that measures and records the tensile force as a function of the elongation of the test piece.The test can be carried out by a vertical or a horizontal tensile-strength-testing apparatus.In order to wet the test pieces for a vertical tensile-strength-testing apparatus,

48、 a device called a Finch Cup, which is held to the lower clamp, is used. For a horizontal tensile-strength-testing apparatus, a soaking cup is inserted between the clamps.From the wet tensile strength and the tensile strength of the same sample in the dry conditioned state, the wet-tensile-strength retention can be calculated.Precision data are available in Annex A.5 Apparatus5.1 Vertical tensile-strength-testing apparatus5.1.1 Tensile-strength-testing apparatusThe tens