DIN EN ISO 12945-3-2014 Textiles - Determination of the fabric propensity to surface pilling fuzzing or matting - Part 3 Random tumble pilling method (ISO 12945-3 2014) German vers.pdf

1、October 2014 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 59.080.30!%;II“2243838www.din.deDDIN EN ISO 12945-3Textiles Determination of the fabric propensity to surface pilling, fuzzing ormatting Part 3: Random tumble pilling method (ISO 12945-3:2014);English version EN ISO 12945-3:2014,English translation of DIN EN ISO 12945-3:2014-10Textilien Bestimmung

3、 der Neigung von textilen Flchengebilden zur Pill-, Flusen- oder Filzbildungauf der Oberflche Teil 3: Random-Tumble-Pilling-Verfahren (ISO 12945-3:2014);Englische Fassung EN ISO 12945-3:2014,Englische bersetzung von DIN EN ISO 12945-3:2014-10Textiles Dtermination de la propension des toffes lbouriff

4、age en surface et au boulochage Partie 3: Mthode de boulochage par projections alatoires dans une chambre cylindrique(ISO 12945-3:2014);Version anglaise EN ISO 12945-3:2014,Traduction anglaise de DIN EN ISO 12945-3:2014-10www.beuth.deDocument comprises 21 pagesIn case of doubt, the German-language o

5、riginal shall be considered authoritative.09.14 DIN EN ISO 12945-3:2014-10 2 A comma is used as the decimal marker. National foreword This document (EN ISO 12945-3:2014) has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and t

6、extile products” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-21 AA Physikalisch-technologische Prfverfahren fr Textilien. ISO 12945 cons

7、ists of the following parts, under the general title Textiles Determination of fabric propensity to surface pilling, fuzzing or matting: Part 1: Pilling box method Part 2: Modified Martindale method Part 3: Random tumble pilling method The DIN Standards corresponding to the International Standards r

8、eferred to in this document are as follows: ISO 48 DIN ISO 48 ISO 139 DIN EN ISO 139 ISO 3175-1 DIN EN ISO 3175-1 ISO 3175-2 DIN EN ISO 3175-2 ISO 3175-3 DIN EN ISO 3175-3 ISO 3175-4 DIN EN ISO 3175-4 ISO 6330 DIN EN ISO 6330 ISO 12945-1 DIN EN ISO 12945-1 ISO 12945-2 DIN EN ISO 12945-2 DIN EN ISO 1

9、2945-3:2014-10 3 National Annex NA (informative) Bibliography DIN EN ISO 139, Textiles Standard atmospheres for conditioning and testing DIN EN ISO 3175-1, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 1: Assessment of performance after cleaning and finishing D

10、IN EN ISO 3175-2, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene DIN EN ISO 3175-3, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: P

11、rocedure for testing performance when cleaning and finishing using hydrocarbon solvents DIN EN ISO 3175-4, Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning DIN EN ISO 6330

12、, Textiles Domestic washing and drying procedures for textile testing DIN EN ISO 12945-1, Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 1: Pilling box method DIN EN ISO 12945-2, Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2:

13、 Modified Martindale method DIN ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) DIN EN ISO 12945-3:2014-10 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12945-3 July 2014 ICS 59.080.01 English

14、 Version Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014) Textiles - Dtermination de la propension des toffes lbouriffage en surface et au boulochage - Partie 3: Mthode de boulochage par projections ala

15、toires dans unechambre cylindrique (ISO 12945-3:2014) Textilien - Bestimmung der Neigung von textilen Flchengebilden zur Pill-, Flusen- oder Filzbildung auf der Oberflche - Teil 3: Random-Tumble-Pilling-Verfahren (ISO 12945-3:2014) This European Standard was approved by CEN on 21 June 2014. CEN memb

16、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

17、on to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managem

18、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

19、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 1

20、7, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12945-3:2014 EContents PageForeword 3Introduction 41 Scope . 52 Normative references 53 Terms and definitions . 54 Principle 65 Apparatus and auxiliary mat

21、erials 65.1 Apparatus 65.2 Auxiliary materials 76 Conditioning and testing atmosphere 87 Preparation of test specimens 87.1 Pretreatment . 87.2 Sampling . 97.3 Fixation of specimen edges 97.4 Number of specimens and marking 98 Preparation of apparatus 98.1 Polychloroprene liners . 99 Procedure . 910

22、 Assessment of pilling and/or fuzzing and/or matting 1011 Results . 1112 Test report . 11Annex A (normative) Checking of apparatus and preparation of liners . 13Annex B (informative) Alternative procedure .14Annex C (informative) Rationale .15Bibliography .17DIN EN ISO 12945-3:2014-10 EN ISO 12945-3

23、:2014 (E) 2 DIN EN ISO 12945-3:2014-10 EN ISO 12945-3:2014 (E) 3Foreword This document (EN ISO 12945-3:2014) has been prepared by Technical Committee ISO/TC 38 “Textiles” in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. Thi

24、s European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of t

25、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

26、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov

27、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12945-3:2014 has been approved by CEN as EN ISO 12945-3:2014 without any modification. IntroductionPills are formed when fibres on a fabric surface “tease out” and become entangled during we

28、ar. Such surface deterioration is generally undesirable, but the degree of consumer tolerance for a given level of pilling will depend on the garment type and fabric end use.Generally, the level of pilling which develops is determined by the rates of the following parallel processes:a) fibre entangl

29、ement leading to pill formation;b) development of more surface fibre;c) fibre and pill wear-off.The rates of these processes depend on the fibre, yarn, and fabric properties. Examples of extreme situations are found in fabrics containing strong fibres versus fabric containing weak fibres. A conseque

30、nce of the strong fibre is a rate of pill formation that exceeds the rate of wear-off. This results in an increase of pilling with an increase of wear. With a weak fibre, the rate of pill formation competes with the rate of wear-off. This would result in a fluctuation of pilling with an increase of

31、wear. There are other constructions where surface fibre wear-off occurs before pill formation. Each of these examples demonstrates the complexity of evaluating the surface change on different types of fabric.The ideal laboratory test would accelerate the wear processes a), b), and c) by exactly the

32、same factor and would be universally applicable to all fibre, yarn, and fabric types. No such test has been developed. However, a test procedure has been established in which fabrics can be ranked in the same order of fuzzing and pilling propensity as is likely to occur in end use wear.Particular at

33、tention is drawn to Annex A which gives advice on the maintenance and checking of the apparatus and liners. It is recommended that Annex A be studied prior to carrying out the procedure.In Bibliography, some listed national standards have been taken into consideration as they refer to the use of the

34、 equipment, on which this part of ISO 12945 is based.DIN EN ISO 12945-3:2014-10 EN ISO 12945-3:2014 (E) 4 1 ScopeThis part of ISO 12945 describes a method for the determination of the resistance to pilling, fuzzing, and matting of textile fabrics using the random tumble pilling tester. This method i

35、s applicable to most of woven and knitted fabrics, including napped fabrics (fleeces, inlay fabrics).This method is not applicable to fabrics which cannot tumble freely.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensab

36、le for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)ISO 139,

37、 Textiles Standard atmospheres for conditioning and testing3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply:3.1fuzzingroughing up of the surface fibres and/or teasing out of the fibres from the fabric, which produces a visible surface changeNote 1 t

38、o entry: This change can occur during washing, dry cleaning, and/or wearing.3.2pillsentangling of fibres into balls (pills) which stand proud of the fabric and are of such density that light will not penetrate and will cast a shadowNote 1 to entry: This change can occur during washing, dry cleaning,

39、 and/or wearing.3.3pillinggeneration of pills over the surface of the fabric3.4jamming, wedging, or entanglementwhen specimens either become entangled on the impeller or lie on the side of the cylinder wall resulting in the fabric not tumbling in the required random actionDIN EN ISO 12945-3:2014-10

40、EN ISO 12945-3:2014 (E) 5 3.5mattingdisorientation of the raising fibres from a napped fabric, which produces a visible surface change4 PrincipleSpecimens are tumbled randomly, under defined conditions, in a lined cylindrical test chamber. Fuzzing, pilling, and matting are assessed visually after a

41、defined period of tumbling.NOTE Any special treatment of the laboratory sample, i.e. washing, cleaning could be as agreed upon between the interested parties and be described in the test report.5 Apparatus and auxiliary materials5.1 ApparatusThe apparatus shall include:5.1.1 Device, consisting of on

42、e or several cylindrical test chambers, horizontally positioned, with the inside dimensions of (152,4 1,0) mm in depth and (146 1) mm in diameter. In the centre of each chamber is a horizontal shaft with cross rods (impellers) which rotate at 1 200 rpm (see Figure 2). This device shall have a mean c

43、apable of sustaining a steady movement of the test specimens (thus, avoiding jamming during the test); this functionality can be set by either an air jet (which can blow onto the cylinder wall) or plastic blades (placed on the shaft, see Figure 2, which can move physically jammed test specimens from

44、 the cylinder wall).NOTE The use of either air jet device or plastic blades shall be reported.5.1.2 Lining material, polychloroprene liner. The polychloroprene liner shall conform to the following criteria as described in Table 1. Length and width of the polychloroprene liner shall be such that it f

45、its securely in the test chamber without gaps or bulging.Table 1 Criteria for polychloroprene linerCriteria Units Polychloroprene linerThickness mm 3,2 0,4Hardness IRHDa60 70aIRHD is an abbreviation for international rubber hardness degree and shall be checked according to ISO 48 (method N, i.e. nor

46、mal test).5.1.3 Viewing cabinet, illuminated by a white fluorescent tube or bulb (the colour temperature of the light source is not critical) to give uniform illumination over the surface of the specimen(s) and masked in such a way that the observer does not look directly into the light. The illumin

47、ant should be positioned at an angle between 5 and 15 to the plane of the specimen (see Figure 1). The distance between the eye and the specimen should be between 30 cm to 50 cm for normal corrected vision.DIN EN ISO 12945-3:2014-10 EN ISO 12945-3:2014 (E) 6 Key1 light source2 observer3 specimenFigure 1 Illumination of specimens5.2 Auxiliary materials5.2.1 Glue, a white water-based all-purpose glue, for sealing the edges of the specimens.NOTE Generally, thi