DIN EN ISO 13632-2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632 2012) German version EN ISO 13632 2012《涂料和清漆用粘合剂 .pdf

1、October 2012 Translation by DIN-Sprachendienst.English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 87.060.20!$0n“1921375www.din.deDDIN EN ISO 13632Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement(ISO 13632:2012);English version EN ISO 13632:2012,English translation of DIN EN ISO 13632:2012-10Bindemittel fr Beschichtungsstoffe Kolophonium Probenahme un

3、d Probenvorbereitung fr die Messung der Farbzahl (ISO 13632:2012);Englische Fassung EN ISO 13632:2012,Englische bersetzung von DIN EN ISO 13632:2012-10Liants pour peintures et vernis Colophane chantillonnage et prparation des chantillons pour le mesurage de la couleur(ISO 13632:2012);Version anglais

4、e EN ISO 13632:2012,Traduction anglaise de DIN EN ISO 13632:2012-10www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Dokument comprises 12 pages 10.12 DIN EN ISO 13632:2012-10 2 A comma is used as the decimal marker. National foreword This standard has been

5、 prepared by Technical Committee ISO/TC 35 “Paints and varnishes”, Subcommittee SC 10 “Test methods for binders for paints and varnishes” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). The responsible German body i

6、nvolved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Working Committee NA 002-00-02 AA Lackrohstoffe. The DIN Standards corresponding to the International Standards referred to in this document are as follows:

7、 ISO 4630-1 DIN EN ISO 4630-1 ISO 4630-2 DIN EN ISO 4630-2 National Annex NA (informative) Bibliography DIN EN ISO 4630-1, Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual method DIN EN ISO 4630-2, Clear liquids Estimation of colour by the Gardner colour scale Part 2: Sp

8、ectro-photometric method EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13632 July 2012 ICS 87.060.20 English Version Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012) Liants pour peintures et vernis - Colophane - chantillonn

9、age et prparation des chantillons pour le mesurage de la couleur (ISO 13632:2012) Bindemittel fr Beschichtungsstoffe - Kolophonium - Probenahme und Probenvorbereitung fr die Messung der Farbzahl (ISO 13632:2012) This European Standard was approved by CEN on 30 June 2012. CEN members are bound to com

10、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE

11、C Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the s

12、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

13、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All

14、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13632:2012: EEN ISO 13632:2012 (E) Contents Page DIN EN ISO 13632:2012-10 2 Foreword 3 1 Scope 4 2 Normative references 4 3 Sampling and sample preparation .4 3.1 Procedure for Gardner co

15、lour measurement of neat rosin .4 3.2 Procedure for Gardner colour measurement of rosin in solution 4 3.3 Procedure for USDA colour 5 4 Colour measurement .5 5 Test report 5 Annex A (informative) Correlation between Gardner colour scale and USDA scale .6 A.1 General 6 A.2 Procedure .6 Bibliography 1

16、0 EN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 3 Foreword This document (EN ISO 13632:2012) has been prepared by Technical Committee ISO/TC 35 Paints and varnishes in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Sta

17、ndard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013. Attention is drawn to the possibility that some of the elements of

18、 this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

19、Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia

20、, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 13632:2012 has been approved by CEN as a EN ISO 13632:2012 without any modification. “”1 ScopeThis International Standard specifies a procedure for sampling of rosin and rosin derivatives from drums, the

21、molten/liquid form, flakes, pellets or pastillesand preparation of the samples for colour measurement. The method to be used for the colour measurement is specified in other standards. The colour of the rosin can be measured with neat rosin or rosin in solution.The two most commonly used colour-meas

22、urement methods are those based on the USDA1)scale and the Gardner colour scale. Annex A provides information on the correlation between these two scales.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the ed

23、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4630-1, Clear liquids Estimation of colour by the Gardner colour scale Part 1: Visual methodISO 4630-2, Clear liquids Estimation of colour by the Gardner colour scale Par

24、t 2: Spectrophotometric methodASTM D509, Standard Test Methods of Sampling and Grading Rosin3 Sampling and sample preparation3.1 Procedure for Gardner colour measurement of neat rosinThe sample to be tested shall consist of freshly broken lumps and shall be free of dust and finely divided material.M

25、elt a sufficient amount of material in a clean container using an oven, hotplate, heat gun, sand bath or oil bath in an inert-gas atmosphere, taking care to avoid overheating. Stir slowly, avoiding the formation of bubbles. Melt the sample completely, but do not heat it above the temperature necessa

26、ry for the sample to pour readily. The time from the beginning of heating to pouring the sample shall not exceed 15 min.Pour the molten sample into a test tube or cuvette and, while the sample is still molten, insert the tube or cuvette into the measurement instrument and measure the colour.3.2 Proc

27、edure for Gardner colour measurement of rosin in solutionThe sample to be tested shall consist of freshly broken lumps and shall be free of dust and finely divided material.Prepare a 50,0:50,0 (by mass) solution of the test material in analytical-grade toluene in a clean beaker or flask. Stir or sha

28、ke gently at room temperature until the rosin is dissolved and pour the solution into a test tube or cuvette.1) USDA United States Department of Agriculture.EN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 4 Insert the test tube or cuvette into the measurement instrument and measure the colour. The ti

29、me from the beginning of sample preparation to pouring the sample shall not exceed 15 min.3.3 Procedure for USDA colourThe sample to be tested shall consist of freshly broken lumps and shall be free of dust and finely divided material.Melt a sufficient amount of material in a small beaker, using an

30、oven, hotplate, heat gun, sand bath or oil bath in an inert-gas atmosphere, taking care to avoid overheating. Stir slowly, avoiding the formation of bubbles. Melt the sample completely, but do not heat it above the temperature necessary for the sample to pour readily.Prepare a sample for testing by

31、pouring the molten material into a mould measuring 22,2 mm in the direction in which it will be viewed during colour measurement. The time from the beginning of heating to pouring the sample shall not exceed 15 min.4 Colour measurementMeasure the Gardner colour as described in ISO 4630-1 or ISO 4630

32、-2 or the USDA colour as described in ASTM D509.5 Test reportIn addition to the information requested in the test reports given in ISO 4630-1, ISO 4630-2 and ASTM D509, state the method of sample preparation.EN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 5 Annex A (informative) Correlation between G

33、ardner colour scale and USDA scale2)A.1 GeneralWhen testing rosin, it has historically been customary to use the USDA scale as defined in ASTM D509. Some users nevertheless prefer to use the Gardner scale as defined in ISO 4630-1. This annex describes a method of calculating the Gardner scale values

34、 which are equivalent to the rosin standards used in ASTM D509, taking into consideration the different path lengths used by the two methods.The visual method, specified in ISO 4630-1, of estimation of colour by the Gardner colour scale requires the test sample to be in a glass test tube, preferably

35、 of inside diameter 10,65 mm. This is usually approximated by a square cuvette with a path length of 10 mm. The USDA scale uses a 22,2 mm cube of material.A.2 ProcedureThe CIE x,y chromaticity coordinates and luminous transmittance Y corresponding to the 18 standards making up the Gardner colour sca

36、le have been taken from ISO 4630-1.The spectral-transmittance data for the 12 standards making up the USDA scale have been taken from ASTM D509. To find the equivalent values of transmittance for a 10 mm path length, these values were raised to the power of 10,0/22,2. This calculation assumes that B

37、eers law can be applied to the samples.Table A.1 shows the x,y and Y data for the Gardner colour scale and similar data calculated from the “corrected” USDA scale transmittance data. Note that the spectral-transmittance values for the three lightest USDA scale values, XA, XB and XC, are not given in

38、 ASTM D509. In order to be able to determine their Gardner equivalents, these spectral-transmittance values were measured using the actual glass standards specified in ASTM D509 and a path length of 22,2 mm.2) This annex applies to neat rosin and rosin derivatives.EN ISO 13632:2012 (E) DIN EN ISO 13

39、632:2012-10 6 Table A.1 x,y and Y data for the Gardner colour scale and similar data calculated from the USDA scaleGardner colour scale USDA scalex y Y x y Y1 0,317 7 0,330 3 80,0 XC 0,324 9 0,343 2 92,622 0,323 3 0,335 2 79,0 XB 0,343 6 0,371 9 89,223 0,332 9 0,345 2 76,0 XA 0,364 6 0,400 6 84,844

40、0,343 7 0,364 4 75,0 X 0,380 5 0,415 8 79,205 0,355 8 0,384 0 74,0 WW 0,398 1 0,430 3 73,916 0,376 7 0,406 1 71,0 WG 0,414 8 0,442 2 69,157 0,404 4 0,435 2 67,0 N 0,434 8 0,453 9 63,568 0,420 7 0,449 8 64,0 M 0,456 6 0,463 3 57,029 0,434 3 0,464 0 61,0 K 0,481 2 0,468 8 49,2310 0,450 3 0,476 0 57,0

41、I 0,506 5 0,467 5 41,2211 0,484 2 0,481 8 45,0 H 0,532 6 0,457 4 31,8412 0,507 7 0,463 8 36,0 G 0,555 7 0,439 7 24,6913 0,539 2 0,445 8 30,0 F 0,604 0 0,395 4 15,5014 0,564 6 0,427 0 22,0 E 0,629 7 0,369 9 8,3815 0,585 7 0,408 9 16,0 D 0,670 6 0,329 2 2,7916 0,604 7 0,392 1 11,017 0,629 0 0,370 1 6,

42、018 0,647 7 0,352 1 4,0Intermediate points were then calculated for the Gardner colour scale by linear interpolation to an accuracy of 0,1 scale units and, for each point on the USDA scale, the nearest point on this expanded Gardner colour scale was determined by finding the smallest difference in t

43、he x,y chromaticity space. The resulting Gardner values are tabulated in Table A.2.Table A.2 Nearest Gardner equivalent to each point on the USDA scaleUSDA scale Gardner colour scale Colour difference EXC 2,5 7,32XB 4,3 7,13XA 5,6 7,06X 6,2 5,59WW 6,8 3,51WG 7,6 2,22N 8,6 3,41M 9,9 6,21K 11,2 6,81I

44、11,9 6,30H 12,7 8,33G 13,5 3,88F 15,9 13,25E 17,0 11,66D 18,0 9,17EN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 7 Also shown in Table A.2 is the CIELAB colour difference E between each USDA scale colour and its nearest Gardner equivalent.Table A.3 gives the CIE x,y chromaticity coordinates and lumi

45、nous transmittance Y corresponding to the Gardner values equivalent to the values on the USDA scale.Table A.3 CIE coordinates corresponding to the Gardner values equivalent to the values on the USDA scaleUSDA scale Gardner colour scale x y YXC 2,5 0,328 1 0,340 2 77,5XB 4,3 0,347 3 0,370 3 74,7XA 5,

46、6 0,368 3 0,397 3 72,2X 6,2 0,382 2 0,411 9 70,2WW 6,8 0,398 9 0,429 4 67,8WG 7,6 0,414 2 0,444 0 65,2N 8,6 0,428 9 0,458 3 62,2M 9,9 0,448 7 0,474 8 57,4K 11,2 0,488 9 0,478 2 43,2I 11,9 0,505 4 0,465 6 36,9H 12,7 0,529 8 0,451 2 31,8G 13,5 0,551 9 0,436 4 26,0F 15,9 0,602 8 0,393 8 11,5E 17,0 0,62

47、9 0 0,370 1 6,0D 18,0 0,647 7 0,352 1 4,0It is possible that a different form of interpolation, e.g. cubic spline or Lagrange, would give slightly different results. However, the differences between such results and those found by linear interpolation, as tabulated above, are likely to be very small

48、.Figure A.1 shows the correlation between the two scales.EN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 8 KeyX USDA scaleY Gardner colour scaleFigure A.1 Correlation between the Gardner colour scale and the USDA scaleEN ISO 13632:2012 (E) DIN EN ISO 13632:2012-10 9 Bibliography1 ASTM D1544, Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)2 ASTM D6166, Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)3 Chinese nationa