DIN EN ISO 14171-2016 Welding consumables - Solid wire electrodes tubular cored electrodes and electrode flux combinations for submerged arc welding of non alloy and fine grain ste.pdf

1、December 2016 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.20!%G“2596136www.din.deD

2、IN EN ISO 14171Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification (ISO 14171:2016);English version EN ISO 14171:2016,English translation of DIN EN ISO 14171:2016-12Schweizustz

3、e Massivdrahtelektroden, Flldrahtelektroden und DrahtPulverKombinationen zum Unterpulverschweien von unlegierten Sthlen und Feinkornsthlen Einteilung (ISO 14171:2016);Englische Fassung EN ISO 14171:2016,Englische bersetzung von DIN EN ISO 14171:2016-12Produits consommables pour le soudage Filslectro

4、des pleins, filslectrodes fourrs et couples filsflux pour le soudage larc sous flux des aciers non allis et grains fins Classification (ISO 14171:2016);Version anglaise EN ISO 14171:2016,Traduction anglaise de DIN EN ISO 14171:2016-12SupersedesDIN EN ISO 14171:201101www.beuth.deDocument comprises 29

5、 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN ISO 14171:2016-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 14171:2016) has been prepared by Technical Committee ISO/TC 44 “We

6、lding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Pr

7、ocesses), Working Committee NA 092-00-03 AA Schweizustze (DVS AG W 5). This International Standard is a “cohabitation standard” in which two different approaches to the same subject are specified, designated as “system A” and “system B”. System A classification mainly reflects the European approach,

8、 while classification according to system B is mainly based on standards used around the Pacific Rim. When using this standard, it is to be established according to which classification designation (A or B) the product is manufactured and delivered. The DIN Standards corresponding to the Internation

9、al Standards referred to in this document are as follows: ISO 544 DIN EN ISO 544 ISO 3690 DIN EN ISO 3690 ISO 6847 DIN EN ISO 6847 ISO 13916 DIN EN ISO 13916 ISO 14174 DIN EN ISO 14174 ISO 14344 DIN EN ISO 14344 ISO 15792-1:2000 DIN EN ISO 15792-1:2012-01 ISO 15792-2:2000 DIN EN ISO 15792-2:2008-08

10、ISO 80000-1:2009 DIN EN ISO 80000-1:2013-08 DIN EN ISO 14171:2016-12 3 Amendments This standard differs from DIN EN ISO 14171:2011-01 as follows: a) in Subclause 4.3B, minor changes have been made to the requirements for the five test specimens to be used for classification by tensile strength and 2

11、7 J impact strength; b) alloys SU08, SU10 and SU111 have been newly added in Table 4B; c) in Table 5B, footnote d on symbol TUN2M1 has been added; d) in Table 6 “Symbol for hydrogen content of deposited metal”, symbols H2 and H4 have been added; e) Clause 8 “Retest” has been slightly revised (specim

12、ens may now also be taken from two new test assemblies). Previous editions DIN 8557: 1961-08 DIN 8557-1: 1981-04 DIN EN 756: 1995-12, 2004-06 DIN EN ISO 14171: 2011-01 DIN EN ISO 14171:2016-12 4 National Annex NA (informative) Bibliography DIN EN ISO 544, Welding consumables Technical delivery condi

13、tions for filler materials and fluxes Type of product, dimensions, tolerances and markings DIN EN ISO 3690, Welding and allied processes Determination of hydrogen content in arc weld metal DIN EN ISO 6847, Welding consumables Deposition of a weld metal pad for chemical analysis DIN EN ISO 13916, Wel

14、ding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature DIN EN ISO 14174, Welding consumables Fluxes for submerged arc welding and electroslag welding Classification DIN EN ISO 14344, Welding consumables Procurement of filler materials an

15、d fluxes DIN EN ISO 15792-1:2012-01, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000 + Amd 1:2011) DIN EN ISO 15792-2:2008-08, Welding consumables Test methods Part 2: Preparation of single-run and two-run t

16、echnique test specimens in steel (ISO 15792-2:2000) DIN EN ISO 80000-1, Quantities and units Part 1: General (ISO 80000-1:2009 + Cor 1:2011) EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14171 July 2016 ICS 25.160.20 Supersedes EN ISO 14171:2010English Version Welding consumables - Solid

17、wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) Produits consommables pour le soudage - Fils-lectrodes pleins, fils-lectrodes fourrs et couples fils-flux pour le soudage larc sous

18、 flux des aciers non allis et grains fins - Classification (ISO 14171:2016)Schweizustze - Massivdrahtelektroden, Flldrahtelektroden und Draht-Pulver-Kombinationen zum Unterpulverschweien von unlegierten Sthlen und Feinkornsthlen - Einteilung (ISO 14171:2016) This European Standard was approved by CE

19、N on 5 May 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

20、 be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t

21、o the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

22、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managemen

23、t Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14171:2016 EForeword .4Introduction . 51 Scope . 62 Normative references 63 Classification 74 Symbols and requirements 84.1 Symbol

24、 for the process . 84.2 Symbol for tensile properties . 84.2.1 Multi-run technique 84.2.2 Two-run technique. 94.3 Symbol for the impact properties of all-weld metal or two-run welded joint 104.4 Symbol for type of welding flux .104.5 Symbol for the chemical composition 104.5.1 Solid wire electrodes

25、.104.5.2 Tubular cored electrode/flux combinations .114.6 Symbol for hydrogen content of deposited metal 205 Mechanical tests .205.1 Multi-run technique . 205.2 Two-run technique . 226 Chemical analysis 227 Rounding procedure 228 Retest .239 Technical delivery conditions 2310 Examples of designation

26、 23Contents PageEuropean foreword .3EN ISO 14171:2016 (E) DIN EN ISO 14171:2016-12 2 European foreword This document (EN ISO 14171:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processe

27、s” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by January 2017. Atten

28、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 14171:2010. According to the CEN-CENELEC Internal Regulatio

29、ns, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

30、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14171:2016 has been approved by CEN as EN ISO 14171:2016 without any modification. EN ISO 14171:201

31、6 (E) DIN EN ISO 14171:2016-12 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body inter

32、ested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

33、 Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO docume

34、nts should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible

35、 for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for th

36、e convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT

37、) see the following URL: www.iso.org/iso/foreword.htmlThe committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.This third edition cancels and replaces the second edition (ISO 14171:2010), which has been technically revised.Request

38、s for official interpretations of any aspect of this International Standard should be directed to the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing of these bodies can be found at www.iso.org.EN ISO 14171:2016 (E) DIN EN ISO 14171:2016-12 4 IntroductionThis Inter

39、national Standard recognizes that there are two somewhat different approaches in the global market to classifying a given electrode/flux combination, and allows for either or both to be used, to suit a particular market need. Application of either type of classification designation (or of both where

40、 suitable) identifies a product as classified in accordance with this International Standard.This International Standard provides a classification system for the designation of solid wire electrodes in terms of their chemical composition, tubular cored electrodes in terms of the deposit composition

41、obtained with a particular submerged arc flux and, where required, electrode/flux combinations in terms of the yield strength, tensile strength and elongation of the all-weld metal deposit. The ratio of yield to tensile strength of weld metal is generally higher than that of parent material. Users a

42、re to note that matching weld metal yield strength to parent material yield strength does not necessarily ensure that the weld metal tensile strength matches that of the parent material. Thus, where the application of the material requires matching tensile strengths, selection of the consumable is i

43、ntended to be made by reference to column 3 of Table 1A or 1B, as appropriate.Although combinations of electrodes and fluxes supplied by individual companies may have the same classification, the individual wire electrodes and fluxes from different companies are not interchangeable unless verified i

44、n accordance with this International Standard.The mechanical properties of all-weld metal test specimens used to classify the electrode/flux combinations vary from those obtained in production joints because of differences in welding procedures such as electrode size and parent material composition.

45、EN ISO 14171:2016 (E) DIN EN ISO 14171:2016-12 5 1 ScopeThis International Standard specifies the requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of non-alloy and fine g

46、rain steels with minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One flux can be classified with different solid wire electrodes and tubular cored electrodes. The solid wire electrode is also classified separately based on chemical composition.This Internation

47、al Standard is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy for weld metal of 47 J, or utilizing a system based upon the tensile strength and the average impact energy for weld metal of 27 J.a) Paragraphs and tab

48、les which carry the suffix letter “A” are applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the yield strength and the average impact energy for weld metal of 47 J, in accordance with this International Standard.b) Clauses and tables which carry the suffix letter “B” are applicable only to electrode/flux combinations and wire electrodes classified using the s