DIN EN ISO 14253-2-2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 Guidance for the estimation of uncertain.pdf

1、November 2011 Translation by DIN-Sprachendienst.English price group 27No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 17.040.30!$vMN“1834243www.din.deDDIN EN ISO 14253-2Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification(ISO 1

3、4253-2:2011)English translation of DIN EN ISO 14253-2:2011-11Geometrische Produktspezifikationen (GPS) Prfung von Werkstcken und Messgerten durch Messen Teil 2: Anleitung zur Schtzung der Unsicherheit bei GPS-Messungen, bei derKalibrierung von Messgerten und bei der Produktprfung (ISO 14253-2:2011)E

4、nglische bersetzung von DIN EN ISO 14253-2:2011-11Spcification gomtrique des produits (GPS) Vrification par la mesure des pices et des quipements de mesure Partie 2: Lignes directrices pour lestimation de lincertitude dans les mesures GPS, dansltalonnage des quipements de mesure et dans la vrificati

5、on des produits(ISO 14253-2:2011)Traduction anglaise de DIN EN ISO 14253-2:2011-11SupersedesDIN EN ISO 14253-1Supplement 1:2000-05www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.8010.11 DIN EN ISO 14253-2:2011-11 A comma is used as

6、 the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification”, Working Group WG 4 “Uncertainty of measurement and decision rules” (Secretariat: DS, Denmark) in collaboration with Technica

7、l Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen (Fundamental Technical Standards Committee), Working Committee NA 152-03-02

8、AA CEN/ISO Geometrische Produktspezifikation und -prfung. ISO 14253 consists of the following parts, under the general title Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment: Part 1: Decision rules for proving conformance or non-conformance wit

9、h specifications Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification Part 3: Guidelines for achieving agreements on measurement uncertainty statements Part 4: Background on functional limits and specification limits

10、 in decision rules Technical Specification The DIN Standards corresponding to the International Standards and publications referred to in this document are as follows: ISO 14253-1 DIN EN ISO 14253-1 ISO 14660-1 DIN EN ISO 14660-1 ISO/IEC Guide 98-3 DIN V ENV 13005 ISO/IEC Guide 99 Internationales Wr

11、terbuch der Metrologie) Amendments This standard differs from DIN EN ISO 14253-1 Supplement 1:2000-05 as follows: a) the Supplement status has been changed to that of a full standard; b) the standard has been completely revised. Previous editions DIN EN ISO 14253-1 Supplement 1: 2000-05 ) Bilingual

12、(German/English), obtainable from: Beuth Verlag GmbH, 10772 Berlin. ISBN 978-3-410-20070-3. 2 DIN EN ISO 14253-2:2011-11 National Annex NA (informative) Bibliography DIN EN ISO 14253-1, Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: D

13、ecision rules for proving conformance or non-conformance with specifications DIN EN ISO 14660-1, Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions DIN V ENV 13005, Guide to the expression of uncertainty in measurement ISO/IEC Guide 99, International

14、vocabulary of metrology 3 DIN EN ISO 14253-2:2011-11 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14253-2 April 2011 ICS 17.040.01 Supersedes ENV ISO 14253-2:2001English Version Geometrical product specifications (GPS) - Inspection by measurement of wor

15、kpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification (ISO 14253-2:2011) Spcification gomtrique des produits (GPS) - Vrification par la mesure des pices et des quipements de mesure - P

16、artie 2: Lignes directrices pour lestimation de lincertitude dans les mesures GPS, dans ltalonnage des quipements de mesure et dans la vrification des produits (ISO 14253-2:2011) Geometrische Produktspezifikationen (GPS) - Prfung von Werkstcken und Messgerten durch Messen - Teil 2: Messunge bei der

17、Kalibrierung von Messgerten und bei der Produktprfung (ISO 14253-2:2011) This European Standard was approved by CEN on 14 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

18、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

19、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

20、epublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

21、 DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14253-2:2011: EAnleitung zur Schtzung der Unsicherheit bei GPS-,nContent

22、s Page Foreword .4Introduction. 1 Scope 2 Normative references 3 Terms and definitions . 4 Symbols 5 Concept of the iterative GUM method for estimation of uncertainty of measurement 6 Procedure for Uncertainty MAnagement PUMA 6.1 General . 6.2 Uncertainty management for a given measurement process.

23、6.3 Uncertainty management for design and development of a measurement process/procedure 7 Sources of errors and uncertainty of measurement15 7.1 Types of errors 15 7.2 Environment for the measurement17 7.3 Reference element of measurement equipment 17 7.4 Measurement equipment 17 7.5 Measurement se

24、t-up (excluding the placement and clamping of the workpiece) .18 7.6 Software and calculations 18 7.7 Metrologist .18 7.8 Measurement object, workpiece or measuring instrument characteristic18 7.9 Definition of the GPS characteristic, workpiece or measuring instrument characteristic19 7.10 Measuring

25、 procedure19 7.11 Physical constants and conversion factors .19 8 Tools for the estimation of uncertainty components, standard uncertainty and expanded uncertainty .19 8.1 Estimation of uncertainty components.19 8.2 Type A evaluation for uncertainty components. 8.3 Type B evaluation for uncertainty

26、components. 8.4 Common Type A and B evaluation examples. 8.5 Black and transparent box model of uncertainty estimation25 8.6 Black box method of uncertainty estimation Summing of uncertainty components into combined standard uncertainty, uc.26 8.7 Transparent box method of uncertainty estimation Sum

27、ming of uncertainty components into combined standard uncertainty, uc.26 8.8 Evaluation of expanded uncertainty, U, from combined standard uncertainty, uc27 8.9 Nature of the uncertainty of measurement parameters ucand U.27 9 Practical estimation of uncertainty Uncertainty budgeting with PUMA28 9.1

28、General .28 9.2 Preconditions for an uncertainty budget28 9.3 Standard procedure for uncertainty budgeting .29 10 Applications . 10.1 General . 10.2 Documentation and evaluation of the uncertainty value 10.3 Design and documentation of the measurement or calibration procedure 10.4 Design, optimizati

29、on and documentation of the calibration hierarchy . DIN EN ISO 14253-2:2011-11 EN ISO 14253-2:2011 (E) 2567791011111112202022313132323310.5 Design and documentation of new measurement equipment . 10.6 Requirements for and qualification of the environment. 10.7 Requirements for and qualification of m

30、easurement personnel. Annex A (informative) Example of uncertainty budgets Calibration of a setting ring 36 Annex B (informative) Example of uncertainty budgets Design of a calibration hierarchy. Annex C (informative) Example of uncertainty budgets Measurement of roundness . 68 Annex D (informative)

31、 Relation to the GPS matrix model Bibliography. 7 DIN EN ISO 14253-2:2011-11 EN ISO 14253-2:2011 (E) 334343443746Foreword This document (EN ISO 14253-2:2011) has been prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification“ in collaboration wit

32、h Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Oct

33、ober 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such paten

34、t rights. This document supersedes ENV ISO 14253-2:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

35、nland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 14253-2:2011 has been approved by CEN as a

36、 EN ISO 14253-2:2011 without any modification. DIN EN ISO 14253-2:2011-11 EN ISO 14253-2:2011 (E) 4Introduction This part of ISO 14253 is a global GPS standard (see ISO/TR 14638:1995). This global GPS standard influences chain links 4, 5 and 6 in all chains of standards. The ISO/GPS Masterplan given

37、 in ISO/TR 14638 gives an overview of the ISO/GPS system of which this document is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise ind

38、icated. For more detailed information on the relation of this International Standard to other standards and to the GPS matrix model, see Annex D. This part of ISO 14253 has been developed to support ISO 14253-1. This part of ISO 14253 establishes a simplified, iterative procedure of the concept and

39、the way to evaluate and determine uncertainty (standard uncertainty and expanded uncertainty) of measurement, and the recommendations of the format to document and report the uncertainty of measurement information as given in the Guide to the expression of uncertainty in measurement (GUM). In most c

40、ases, only very limited resources are necessary to estimate uncertainty of measurement by this simplified, iterative procedure, but the procedure may lead to a slight overestimation of the uncertainty of measurement. If a more accurate estimation of the uncertainty of measurement is needed, the more

41、 elaborated procedures of the GUM need to be applied. This simplified, iterative procedure of the GUM methods is intended for GPS measurements, but may be used in other areas of industrial (applied) metrology. The uncertainty of measurement and the concept of handling uncertainty of measurement are

42、important to all the technical functions within a company. This part of ISO 14253 is relevant to several technical functions, including management, design and development, manufacturing, quality assurance and metrology. This part of ISO 14253 is of special importance in relation to ISO 9000 quality

43、assurance systems, e.g. it is a requirement that methods for monitoring and measurement of the quality management system processes are suitable. The measurement uncertainty is a measure of the process suitability. In this part of ISO 14253, the uncertainty of the result of a process of calibration a

44、nd a process of measurement is handled in the same way: calibration is treated as a “measurement of the metrological characteristics of a measuring equipment or a measurement standard”; measurement is treated as a “measurement of the geometrical characteristics of a workpiece”. Therefore, in most ca

45、ses, no distinction is made in the text between measurement and calibration. The term “measurement” is used as a synonym for both. DIN EN ISO 14253-2:2011-11 EN ISO 14253-2:2011 (E) 51 Scope This part of ISO 14253 gives guidance on the implementation of the concept of the “Guide to the estimation of

46、 uncertainty in measurement” (in short GUM) to be applied in industry for the calibration of (measurement) standards and measuring equipment in the field of GPS and the measurement of workpiece GPS characteristics. The aim is to promote full information on how to achieve uncertainty statements and p

47、rovide the basis for international comparison of measurement results and their uncertainties (relationship between purchaser and supplier). This part of ISO 14253 is intended to support ISO 14253-1. Both parts are beneficial to all technical functions in a company in the interpretation of GPS specif

48、ications i.e. tolerances of workpiece characteristics and values of maximum permissible errors (MPEs) for metrological characteristics of measuring equipment. This part of ISO 14253 introduces the Procedure for Uncertainty MAnagement (PUMA), which is a practical, iterative procedure based on the GUM

49、 for estimating uncertainty of measurement without changing the basic concepts of the GUM. It is intended to be used generally for estimating uncertainty of measurement and giving statements of uncertainty for: single measurement results; the comparison of two or more measurement results; the comparison of measurement results from one or more workpieces or pieces of measurement equipment with given specifications i.e. maximum permissible errors (MPEs) for a metrological chara