DIN EN ISO 14691-2009 Petroleum petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691 2008) Engl.pdf

1、Mai 2009DEUTSCHE NORM Normenausschuss Erdl- und Erdgasgewinnung (NG) im DINPreisgruppe 16DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet.ICS 21.120.20; 75.180.20!$UT“1504994www.d

2、in.deDDIN EN ISO 14691Erdl-, petrochemische und Erdgasindustrie Flexible Kupplungen fr mechanische Kraftbertragung Allgemeine Anwendungsflle (ISO 14691:2008);Englische Fassung EN ISO 14691:2008Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Ge

3、neral-purpose applications (ISO 14691:2008);English version EN ISO 14691:2008Industries du ptrole, de la ptrochimie et du gaz naturel Accouplements flexibles pour transmission de puissance mcanique Applications dusage gnral (ISO 14691:2008);Version anglaise EN ISO 14691:2008Alleinverkauf der Normen

4、durch Beuth Verlag GmbH, 10772 BerlinErsatz frDIN EN ISO 14691:2002-12www.beuth.deGesamtumfang 38 SeitenB55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 DIN EN ISO 14691:2009-05 2 Nationales Vorwort Dieses Dokument (EN ISO 14691:2008) wurde vom Technischen Komitee CEN/TC 12 Mater

5、ialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie“ (Sekretariat: AFNOR, Frankreich) erstellt. Es handelt sich dabei um die unvernderte bernahme von ISO 14691:2008, erarbeitet von ISO/TC 67 Materials, equipment and offshore structures for petroleum, petrochemi

6、cal and natural gas industries“. Fr Deutschland hat hieran der NA 109-00-01 AA Materialien, Ausrstungen und Offshore-Bauwerke fr die Erdl-, petrochemische und Erdgasindustrie“ im Normenausschuss Erdl- und Erdgasgewinnung (NG) mitgearbeitet. Diese Europische Norm enthlt unter Bercksichtigung des DIN-

7、Prsidialbeschlusses 1/2004 nur die englische Originalfassung der ISO-Norm. Diese Norm enthlt neben den gesetzlichen Einheiten auch die Einheiten ft“, , F“, inch“, lb“ und psi“, die im Deutschen Normenwerk nicht zugelassen sind. Es wird jedoch ausdrcklich darauf hingewiesen, dass die Anwendung dieser

8、 Einheiten im nationalen amtlichen und geschftlichen Verkehr aufgrund des Gesetzes ber Einheiten im Messwesen nicht zulssig ist. Nicht-SI-Einheit SI-Einheit Umrechnung ft m 1 ft = 0,304 8 m F C C = (5/9) (F 32) inch mm 1 inch = 25,4 mm lb kg 1 lb = 0,453 592 37 kg psi Pa 1 psi = 6 894,757 Pa nderung

9、en Gegenber DIN EN ISO 14691:2002-12 wurden folgende nderungen vorgenommen: a) Abschnitt 12 mit Angaben zum Vertrieb der Kupplungen wurde neu aufgenommen; b) Anhang D ber Kupplungsschutzvorrichtungen wurde neu aufgenommen; c) Anhang E ber Kupplungsdatenbltter wurde neu aufgenommen; d) die Norm wurde

10、 redaktionell berarbeitet. Frhere Ausgaben DIN EN ISO 14691: 2002-09, 2002-12 B55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14691 December 2008 ICS 75.180.20 Supersedes EN ISO 14691:2000English Version Petroleum, petroch

11、emical and natural gas industries Flexible couplings for mechanical power transmission General-purpose applications (ISO 14691:2008) Industries du ptrole, de la ptrochimie et du gaz naturel Accouplements flexibles pour transmission de puissance mcanique Applications dusage gnral (ISO 14691:2008) Erd

12、l-, petrochemische und Erdgasindustrie Flexible Kupplungen fr mechanische Kraftbertragung Allgemeine Anwendungsflle (ISO 14691:2008) This European Standard was approved by CEN on 28 November 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition

13、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three of

14、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austr

15、ia, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMIT

16、TEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B- 1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14691:2008: EB55EB1B3E14C22109E9

17、18E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 EN ISO 14691:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Statutory requirements .9 5 Coupling selection.9 5.1 General9 5.2 Compliance 10 6 Purchasers specification 10 7 Coupling r

18、ating . 12 8 Construction requirements 13 8.1 General. 13 8.2 Materials of construction . 14 8.3 Coupling hubs. 15 8.4 Bolting 16 8.5 Electrical insulation 16 8.6 Alignment provision . 16 8.7 Rotor dynamic data 16 8.8 Non-horizontal applications 17 8.9 Additional requirements for gear couplings 17 8

19、.10 Additional requirements for metallic flexible-element couplings 17 8.11 Additional requirements for elastomeric couplings . 17 9 Balance 18 9.1 Objectives 18 9.2 Balance quality 18 9.3 Additional balancing requirements. 19 9.4 Verification of coupling balance . 19 10 Accessories. 19 11 Manufactu

20、ring quality, inspection, testing and preparation for shipment . 19 11.1 Manufacturing quality 19 11.2 Inspection and testing 20 11.3 Preparation for shipment . 20 12 Vendors data 20 12.1 General. 20 12.2 Proposals. 20 12.3 Contract data. 21 Annex A (informative) Examples of misalignment 23 Annex B

21、(informative) Example of the determination of potential unbalance . 25 Annex C (informative) Coupling tapers 28 Annex D (normative) Coupling guards 29 Annex E (informative) Coupling datasheets 31 Bibliography. 36 DIN EN ISO 14691:2009-05B55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 20

22、10-04 EN ISO 14691:2008 (E) 3 Foreword This document (EN ISO 14691:2008) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore s

23、tructures for petroleum, petrochemical and natural gas industries”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national s

24、tandards shall be withdrawn at the latest by June 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN IS

25、O 14691:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ir

26、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 14691:2008 has been approved by CEN as a EN ISO 14691:2008 without any modification. DIN EN IS

27、O 14691:2009-05B55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 EN ISO 14691:2008 (E) 4 Introduction Users of this International Standard should be aware that further or differing requirements may be needed for individual applications. This International Standard is not intended

28、to inhibit a vendor from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This may be particularly appropriate where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any

29、variations from this International Standard and provide details. For the following applications, the use of ISO 10441 is recommended: large or high-speed machines that may be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the

30、installation (special-purpose applications); machines in which the first lateral critical speed is less than the maximum required operating speed (flexible-shaft machines); machines in which the rotor dynamics are particularly sensitive to coupling unbalance. This International Standard requires the

31、 purchaser to specify certain details and features. A bullet () at the beginning of a subclause or paragraph indicates that either a decision is required or that further information is to be provided by the purchaser. This information should be indicated on the datasheet(s), typical examples of whic

32、h are included as Annex E, otherwise it should be stated in the quotation request or in the order. The coupling vendor is not normally required to supply the coupling guard or guards. However, for completeness and for the information of the user of this International Standard, Annex D, which provide

33、s requirements for guards, has been added. DIN EN ISO 14691:2009-05B55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 EN ISO 14691:2008 (E) 5 1 Scope This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of tw

34、o machines for general-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications typically require couplings to transmit power at speeds not exceeding 4 000 r/min, between machines in which the first lateral critical speed is above the running speed range (st

35、iff-shaft machines). It can, by agreement, be used for applications outside these limits. NOTE 1 Recommendations are included in the Introduction as to when the use of ISO 10441 should be considered. This International Standard is applicable to couplings designed to accommodate parallel (or lateral)

36、 offset, angular misalignment and axial displacement of the shafts without imposing excessive mechanical loading on the coupled machines. Couplings covered by this International Standard include gear (and other mechanical contact types), metallic flexible-element and various elastomeric types. Such

37、couplings can be of all metal construction or can include components of non-metallic materials, such as composites. This International Standard covers design, materials of construction, inspection and testing of couplings and methods of attachment of the coupling to the shafts (including tapered sle

38、eve and other proprietary devices). This International Standard does not apply to special types of couplings, such as clutch, hydraulic, eddy-current, rigid and radial-spline types. This International Standard does not define criteria for the selection of coupling types for specific applications. NO

39、TE 2 In many cases, couplings covered by this International Standard are manufacturers catalogue items. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the

40、latest edition of the referenced document (including any amendments) applies. ISO 286-2:1988, ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts ISO 1940-1:2003, Mechanical vibration Balance quality requirements for rotors in a constan

41、t (rigid) state Part 1: Specification and verification of balance tolerances ISO 8821, Mechanical vibration Balancing Shaft and fitment key convention ANSI/AGMA 9002, Bores and Keyways for Flexible Couplings (Inch Series) ANSI/AGMA 9003, Flexible Couplings Keyless Fits ANSI/AGMA 9112, Bores and Keyw

42、ays for Flexible Couplings (Metric Series) DIN 7190, Interference fits Calculation and design rules1)1) Deutsches Institut fr Normung, Burggrafenstrae 6, Berlin, Germany D-10787. DIN EN ISO 14691:2009-05B55EB1B3E14C22109E918E8EA43EDB30F09DCEB7EF8AD9NormCD - Stand 2010-04 EN ISO 14691:2008 (E) 6 3 Te

43、rms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 angular misalignment double-engagement couplings two minor angles between the extension of each machine shaft centre-line and the centre-line of the structure joining the two flexible elements 3.2 a

44、ngular misalignment single-engagement couplings minor angle between the extensions of the shaft centre-lines of the two coupled machines 3.3 axial displacement change in the relative axial position of the adjacent shaft ends of two coupled machines, usually caused by thermal expansion 3.4 continuous

45、 torque rating coupling manufacturers declared maximum torque that the coupling can transmit continuously for the specified life 3.5 distance between shaft ends DBSE distance from the extreme end of one shaft (including any threaded end) to the extreme end of the next shaft or, in the case of integral flanges, the distance from the mating faces 3.6 double-engagement coupling coupling with two planes of flexure NOTE This arrangement enables couplings of certain types, notably gear and metallic flexible-element types, that cannot