DIN EN ISO 14880-1-2016 Optics and photonics - Microlens arrays - Part 1 Vocabulary and general properties (ISO 14880-1 2016) German version EN ISO 14880-1 2016《光学和光子学 显微物镜系列 第1部分 .pdf

1、December 2016 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 01.040.31; 31.260!%“2596156www.

2、din.deDIN EN ISO 14880-1Optics and photonics Microlens arrays Part 1: Vocabulary and general properties (ISO 148801:2016);English version EN ISO 148801:2016,English translation of DIN EN ISO 14880-1:2016-12Optik und Photonik Mikrolinsenarrays Teil 1: Begriffe und allgemeine Eigenschaften (ISO 148801

3、:2016);Englische Fassung EN ISO 148801:2016,Englische bersetzung von DIN EN ISO 14880-1:2016-12Optique et photonique Rseaux de microlentilles Partie 1: Vocabulaire et proprits gnrales (ISO 148801:2016);Version anglaise EN ISO 148801:2016,Traduction anglaise de DIN EN ISO 14880-1:2016-12SupersedesDIN

4、 EN ISO 148801:200505www.beuth.deDocument comprises 26 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17DIN EN ISO 14880-1:2016-12 2 A comma is used as the decimal marker. National foreword This document (EN ISO 14880-1:201

5、6) has been prepared by Technical Committee ISO/TC 172 “Optics and photonics” in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Feinmechanik und Optik (DIN Standards

6、 Committee Optics and Precision Mechanics), Working Committee NA 027-01-18 AA Laser und elektro-optische Systeme. DIN EN ISO 14880, Optics and photonics Microlens arrays consists of the following parts: Part 1: Vocabulary and general properties Part 2: Test methods for wavefront abberations Part 3:

7、Test methods for optical properties other than wavefront aberrations Part 4: Test methods for geometrical properties Part 5 has been published by ISO as Technical report ISO/TR 14880-5 (no adoption at German national level). The DIN Standard corresponding to the International Standard referred to in

8、 this document is as follows: ISO 15529 DIN ISO 15529 Amendments This standard differs from DIN EN ISO 14880-1:2005-05 as follows: a) the following terms and definitions have been added: achromatic microlens array, lenticular lens array, beam homogenizer, structured microlens array, condenser array,

9、 Gabor superlens, spectral transmission, decentration; b) six informative Annexes dealing with microlens arrays applications have been added: Annex A Microlens arrays applications (1) Telecommunications Annex B Microlens arrays applications (2) Image sensor arrays Annex C Microlens arrays applicatio

10、ns (3) LCD projection panels Annex D Microlens arrays applications (4) Wavefront sensors Annex E Microlens arrays applications (5) Stereo displays Annex F Microlens arrays applications (6) 3D imaging and light-field cameras Previous editions DIN EN ISO 14880-1: 2005-05 National Annex NA (informative

11、) Bibliography DIN ISO 15529, Optics and photonics Optical transfer function Principles of measurement of modulation transfer function (MTF) of sampled imaging systems EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14880-1 August 2016 ICS 01.040.31; 31.260 Supersedes EN ISO 14880-1:2005Eng

12、lish Version Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties (ISO 14880-1:2016) Optique et photonique - Rseaux de microlentilles - Partie 1: Vocabulaire et proprits gnrales (ISO 14880-1:2016) Optik und Photonik - Mikrolinsenarrays - Teil 1: Begriffe und allgemeine

13、 Eigenschaften(ISO 14880-1:2016) This European Standard was approved by CEN on 22 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

14、 lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

15、nder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Forme

16、r Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E

17、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14880-1:2016 EEN ISO 14880-1:2016 (E) 2 Contents Page

18、European foreword . 3 Introduction 4 1 Scope 5 2 Terms and definitions . 6 2.1 Basic definition of microlens and microlens array . 6 2.2 General terms and definitions 6 2.3 Terms relating to properties of the microlens array 10 2.3.1 Geometrical properties 10 2.3.2 Optical properties 11 3 Symbols an

19、d units of measure . 12 4 Coordinate system . 13 5 Properties of individual lenses . 14 Annex A (informative) Microlens arrays applications (1) Telecommunications . 15 Annex B (informative) Microlens arrays applications (2) Image sensor arrays 16 Annex C (informative) Microlens arrays applications (

20、3) LCD projection panels . 17 Annex D (informative) Microlens arrays applications (4) Wavefront sensors . 18 D.1 Shack-Hartmann wavefront sensor . 18 D.2 Other wavefront sensors . 19 Annex E (informative) Microlens arrays applications (5) stereo displays . 21 Annex F (informative) Microlens arrays a

21、pplications (6) 3D imaging and light-field cameras 22 Bibliography . 24 DIN EN ISO 14880-1:2016-12 EN ISO 14880-1:2016 (E) 3 European foreword The text of ISO 14880-1:2016 has been prepared by Technical Committee ISO/TC 172 “Optics and photonics” of the International Organization for Standardization

22、 (ISO) and has been taken over as EN ISO 14880-1:2016 by Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest

23、 by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

24、uch patent rights. This document supersedes EN ISO 14880-1:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Est

25、onia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The

26、 text of ISO 14880-1:2016 has been approved by CEN as EN ISO 14880-1:2016 without any modification. DIN EN ISO 14880-1:2016-12 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internatio

27、nal Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO

28、, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part

29、 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the e

30、lements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations rece

31、ived (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs ad

32、herence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 9, Electro-optical systems.This second edition cancels and replaces the f

33、irst edition (ISO 14880-1:2001), which has been technically revised. It also incorporates the Technical Corrigenda ISO 14880-1:2001/Cor 1:2003 and ISO 14880-1:2001/Cor 2:2005.ISO 14880 consists of the following parts, under the general title Optics and photonics Microlens arrays: Part 1: Vocabulary

34、and general properties Part 2: Test methods for wavefront aberrations Part 3: Test methods for optical properties other than wavefront aberrations Part 4: Test methods for geometrical properties Part 5: Guidance on testing4DIN EN ISO 14880-1:2016-12 EN ISO 14880-1:2016 (E) IntroductionThe aim of thi

35、s part of ISO 14880 is to clarify the terms used in the field of microlens arrays.Microoptics and microlens arrays are found in many modern optical devices.1They are used as coupling optics for detector arrays, the digital camera being an example of a mass market application. They are used to enhanc

36、e the optical performance of liquid crystal displays to couple arrays of light sources and to direct illumination for example in 2D and 3D television, mobile phone and portable computer displays. Microlens arrays are used in wavefront sensors for optical metrology and astronomy, lightfield sensors f

37、or threedimensional photography and microscopy and in optical parallel processor elements.Multiple arrays of microlenses can be assembled to form optical systems such as optical condensers, controlled diffusers and superlenses.23Furthermore, arrays of microoptical elements such as micro-prisms and m

38、icro-mirrors are used.45The expanded market in microlens arrays has generated a need to agree on basic terms and definitions for microlens arrays and systems and this part of ISO 14880 aims to satisfy that need.5 DIN EN ISO 14880-1:2016-12 EN ISO 14880-1:2016 (E) 1 ScopeThis part of ISO 14880 define

39、s terms for microlens arrays. It applies to microlens arrays which consist of arrays of very small lenses formed inside or on one or more surfaces of a common substrate and systems. The aim of this part of ISO 14880 is to improve the compatibility and interchangeability of lens arrays from different

40、 suppliers and to enhance the development of technology using microlens arrays.2 Terms and definitions2.1 Basic definition of microlens and microlens array2.1.1microlenslens in an array with an aperture of less than a few millimetres including lenses which work by refraction at the surface, refracti

41、on in the bulk of the substrate, diffraction or a combination of theseNote 1 to entry: The microlens can have a variety of aperture shapes: circular, hexagonal or rectangular for example. The surface of the lens can be flat, convex or concave.2.1.2microlens arrayregular arrangement of microlenses on

42、 a single substrateNote 1 to entry: Irregular or structured arrays are sometimes used, for example, in beam shaping, diffusion, and homogenization.2.2 General terms and definitions2.2.1effective front focal lengthfE,fdistance from the vertex of the microlens to the position of the focus given by fin

43、ding the maximum of the power density distribution when collimated radiation is incident from the back of the substrateNote 1 to entry: The effective front focal length can differ from the paraxial front focal length in the case of aberrated lenses.Note 2 to entry: The effective front focal length i

44、s different from the classical effective focal length since it is measured from the lens vertex.2.2.2effective back focal lengthfE,bdistance from the back surface of the substrate or the vertex of the microlens to the position of the focal point, when collimated radiation is incident from the lens s

45、ide of the substrateNote 1 to entry: The effective back focal length can differ from the paraxial back focal length in the case of aberrated lenses.6DIN EN ISO 14880-1:2016-12 EN ISO 14880-1:2016 (E) Note 2 to entry: In case the microlens or microlenses are formed on both sides of the substrate, “ef

46、fective back focal length” is defined from the vertex of the microlens to the position of the focal point.2.2.3radius of curvatureRcdistance from the vertex of the microlens to the centre of curvature of the lens surfaceNote 1 to entry: The radius of curvature is expressed in millimetres.2.2.4wavefr

47、ont aberrationrmsroot mean square of deviation of the wavefront from an ideal spherical or other wavefrontNote 1 to entry: The wavefront aberration is expressed in parts of the wavelength, .a) Microlens with a graded refractive indexb) Surface relief refractive microlensc) Fresnel microlensd) Hybrid

48、 microlense) Diffractive binary-optic microlensFigure 1 Five different types of microlens2.2.5.1chromatic aberrationchange of the focal length with wavelengthNote 1 to entry: Chromatic aberration is characterized by the effective Abbe-number, which is given by:7 DIN EN ISO 14880-1:2016-12 EN ISO 148

49、80-1:2016 (E) vfffeff=( ) ( )( )111132where the values of 1, 2and 3are specified in order to correspond to current practice in optical lens design; there are no units.Note 2 to entry: At optical wavelengths, the C, D, F lines are generally used as 1 2 3. However, other wavelengths such as the infrared spectrum can be used where appropriate.2.2.5.2achromatic microlens arraymicrolens array designed to limit the effects of chromatic aberrationNote 1 to entry: Ac