DIN EN ISO 15493-2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS) unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vin.pdf

1、July 2017 English price group 26No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.040.01!%guK“2688240www.din.deDIN

2、 EN ISO 15493Plastics piping systems for industrial applications Acrylonitrilebutadienestyrene (ABS), unplasticized poly(vinyl chloride) (PVCU) and chlorinated poly(vinyl chloride) (PVCC) Specifications for components and the system Metric series (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004);English ve

3、rsion EN ISO 15493:2003 + A1:2017,English translation of DIN EN ISO 15493:2017-07KunststoffRohrleitungssysteme fr industrielle Anwendungen AcrylnitrilButadienStyrol (ABS), weichmacherfreies Polyvinylchlorid (PVCU) und chloriertes Polyvinylchlorid (PVCC) Anforderungen an Rohrleitungsteile und das Roh

4、rleitungssystem Metrische Reihen (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004);Englische Fassung EN ISO 15493:2003 + A1:2017,Englische bersetzung von DIN EN ISO 15493:2017-07Systmes de canalisations en matires plastiques pour les applications industrielles Acrylonitrilebutadinestyrne (ABS), poly(chloru

5、re de vinyle) non plastifi (PVCU) et poly(chlorure de vinyle) chlor (PVCC) Spcifications pour les composants et le systme Srie mtrique (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004);Version anglaise EN ISO 15493:2003 + A1:2017,Traduction anglaise de DIN EN ISO 15493:2017-07SupersedesDIN EN ISO 15493:200

6、310www.beuth.deDocument comprises 73 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.07.17 DIN EN ISO 15493:2017-07 2 A comma is used as the decimal marker. National foreword This document (E N IS O1 5493:2003 A 1:2017)+ hasbee

7、npreparedbyTechnicalCommitteeISO/TC138“Plasticspipes,fittingsandvalvesforthe transport of fluids” in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” (Secretariat: NEN, Netherlands).,a s well as Amendment1 ( ISO15493:2003/Amd 1:2016).The responsible Ger

8、man body involved in its preparation was DIN-Normenausschuss Kunststoffe (DIN Standards Committee Plastics), Working Committee NA 054-05-05 AA “Plastics pipes for industrial applications”. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. The DIN St

9、andards corresponding to the International Standards referred to in this document are as follows: ISO 228-1 DIN EN ISO 228-1 ISO 306 DIN EN ISO 306 ISO 472 DIN EN ISO 472 ISO 580 DIN EN ISO 580 ISO 1043-1 DIN EN ISO 1043-1 ISO 1158 DIN EN ISO 1158 ISO 1167-1 DIN EN ISO 1167-1 ISO 1183-2 DIN EN ISO 1

10、183-2 ISO 3126 DIN EN ISO 3126 ISO 9001 DIN EN ISO 9001 ISO 9080 DIN EN ISO 9080 ISO 9311-1 DIN EN ISO 9311-1 ISO 10931 DIN EN ISO 10931 ISO 12162 DIN EN ISO 12162 ISO 15494 DIN EN ISO 15494 ISO 16135 DIN EN ISO 16135 ISO 16136 DIN EN ISO 16136 ISO 16137 DIN EN ISO 16137 ISO 16138 DIN EN ISO 16138 I

11、SO 16139 DIN EN ISO 16139 ISO 21787 DIN EN ISO 21787 DIN EN ISO 15493:2017-07 3 Amendments This standard differs from DIN EN ISO 15493:2003-10 as follows: a) normative references have been updated; b) in 3.4.1, the equation has been corrected in footnote 3); c) 5.1 has been revised; d) a note has be

12、en added in 5.2; e) Clause 11 has been revised; f) Tables C.1, C.8 and C.11 have been replaced; g) C.1.5.2 has been revised; h) C.3.2 has been revised; i) C.3.3.2.4 including Figure C.4 and Table C.5 have been deleted; j) due to the deletion of this subclause, the subsequent subclauses have been ren

13、umbered; k) in Table C.13, a table footnote has been added; l) in Table C.14, a table footnote has been added; m) the standard has been editorially revised. Previous editions DIN EN ISO 15493: 2003-10 DIN EN ISO 15493:2017-07 4 National Annex NA (informative) Bibliography DIN EN ISO 228-1, Pipe thre

14、ads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation DIN EN ISO 306, Plastics Thermoplastic materials Determination of Vicat softening temperature (VST) DIN EN ISO 472, Plastics Vocabulary DIN EN ISO 580, Plastics piping and ducting systems Injec

15、tion-moulded thermoplastics fittings Methods for visually assessing the effects of heating DIN EN ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics DIN EN ISO 1158, Plastics Vinyl chloride homopolymers and copolymers Determination of chlorine

16、 content DIN EN ISO 1167-1, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General test method DIN EN ISO 1183-2, Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient co

17、lumn method DIN EN ISO 3126, Plastics piping systems Plastics components Determination of dimensions DIN EN ISO 9001, Quality management systems Requirements DIN EN ISO 9080, Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe f

18、orm by extrapolation DIN EN ISO 9311-1, Adhesives for thermoplastic piping systems Part 1: Determination of film properties DIN EN ISO 10931, Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system DIN EN ISO 12162, Thermoplas

19、tics materials for pipes and fittings for pressure applications Classification, designation and design coefficient DIN EN ISO 15494, Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene

20、 (PE-X), polypropylene (PP) Metric series for specifications for components and the system DIN EN ISO 16135, Industrial valves Ball valves of thermoplastics materials DIN EN ISO 16136, Industrial valves Butterfly valves of thermoplastics materials DIN EN ISO 16137, Industrial valves Check valves of

21、thermoplastics materials DIN EN ISO 16138, Industrial valves Diaphragm valves of thermoplastics materials DIN EN ISO 16139, Industrial valves Gate valves of thermoplastics materials DIN EN ISO 21787, Industrial valves Globe valves of thermoplastics materials EUROPEAN STANDARD NORME EUROPENNE EUROPIS

22、CHE NORM EN ISO 15493 April 2003 + A1 January 2017 ICS 23.040.01 English Version Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the sy

23、stem Metric series (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004) Systmes de canalisations en matires plastiques pour les applications industrielles Acrylonitrile-butadine-styrne (ABS), poly(chlorure de vinyle) non plastifi (PVC-U) et poly(chlorure de vinyle) chlor (PVC-C) Spcifications pour les composa

24、nts et le systme Srie mtrique (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004) Kunststoff-Rohrleitungssysteme fr industrielle Anwendungen Acrylnitril-Butadien-Styrol (ABS), weichmacherfreies Polyvinylchlorid (PVC-U) und chloriertes Polyvinylchlorid (PVC-C) Anforderungen an Rohrleitungsteile und das Rohrle

25、itungssystem Metrische Reihen (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004) This European Standard was approved by CEN on 11 March 2003. This amendment A1 modifies the European Standard EN ISO 15493:2003; it was approved by CEN on 23 December 2016. CEN members are bound to comply with the CEN/CENELEC I

26、nternal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to

27、any CEN member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official version

28、s. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

29、and, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of expl

30、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15493:2003 + A1:2017 E EN ISO 15493:2003 + A1:2017 (E) 2 Contents Page European foreword . 3 !European foreword to Amendment 1“ . 4 Introduction 5 1 Scope 6 2 Normative references 7 3 Terms and definit

31、ions . 9 4 Symbols and abbreviated terms . 12 5 Material 13 6 General characteristics 15 7 Geometrical characteristics . 15 8 Mechanical characteristics . 16 9 Physical characteristics . 16 10 Chemical characteristics 17 11 Adhesives 17 12 Performance requirements 17 13 Classification of components

32、. 18 14 Design of a thermoplastics piping system for industrial applications . 18 15 Installation of piping systems 18 16 Declaration of compliance 19 17 Marking 19 Annex A (normative) Specific characteristics and requirements for industrial piping systems made from acrylonitrile-butadiene-styrene (

33、ABS). 21 Annex B (normative) Specific characteristics and requirements for industrial piping systems made from unplasticized poly(vinyl chloride) (PVC-U) 35 Annex C (normative) Specific characteristics and requirements for industrial piping systems made from chlorinated poly(vinyl chloride) (PVC-C)

34、49 Annex ZA (normative) Normative references to international publications with their relevant European publications . 66 Annex ZB (informative) Clauses of this Standard addressing essential requirements or other provisions of EU Directives . 67 Bibliography . 68 DIN EN ISO 15493:2017-07 EN ISO 1549

35、3:2003 + A1:2017 (E) 3 European foreword This document (EN ISO 15493:2003) has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids” in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems”, the sec

36、retariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latest by October 2003. This document h

37、as been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this document. Annexes A, B and C fo

38、rm a normative part of this International Standard. Annex ZA is informative. At the date of publication of this International Standard, the following standards had been published for piping systems, used for industrial applications, made from other types of plastic: ISO 10931 (all parts), Plastics p

39、iping systems for industrial applications Poly(vinylidene fluoride) (PVDF) ISO 15494, Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE) and polypropylene (PP) Specifications for components and the system Metric series. According to the CEN/CENELEC Internal Regula

40、tions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Swed

41、en, Switzerland and the United Kingdom. Endorsement notice The text of ISO 15493:2003 has been approved by CEN as EN ISO 15493:2003 without any modifications. DIN EN ISO 15493:2017-07 EN ISO 15493:2003 + A1:2017 (E) 4 !European foreword to Amendment 1 This document (EN ISO 15493:2003/A1:2017) has be

42、en prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids” in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This Amendment to the European Standard EN ISO 1

43、5493:2003 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 2017. Attention is drawn to the possibility that some of the elements of t

44、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential re

45、quirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of EN ISO 15493:2003. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Stan

46、dard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slov

47、enia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Endorsement notice The text of ISO 15493:2003/Amd 1:2016 + Cor 1:2004 has been approved by CEN as EN ISO 15493:2003/A1:2017 without any modification.“ DIN EN ISO 15493:2017-07 Introduction This International Standard specifies the characte

48、ristics and requirements for a piping system and its components made from acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C), as applicable, intended to be used for industrial applications above ground by authorities, design

49、engineers, certification bodies, inspection bodies, test laboratories, manufacturers and users. 5 EN ISO 15493:2003 + A1:2017 (E) DIN EN ISO 15493:2017-07 1 Scope This International Standard specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials: acrylonitrile-butadiene-styrene (ABS);