DIN EN ISO 15618-1-2016 Qualification testing of welders for underwater welding - Part 1 Hyperbaric wet welding (ISO 15618-1 2016) German version EN ISO 15618-1 2016《从事水下焊接的焊接员资格检验.pdf

1、December 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.01!%N“2599143www.din.deD

2、IN EN ISO 15618-1Qualification testing of welders for underwater welding Part 1: Hyperbaric wet welding (ISO 156181:2016);English version EN ISO 156181:2016,English translation of DIN EN ISO 15618-1:2016-12Prfung von Schweiern fr Unterwasserschweien Teil 1: Nassschweien unter berdruck (ISO 156181:20

3、16);Englische Fassung EN ISO 156181:2016,Englische bersetzung von DIN EN ISO 15618-1:2016-12preuve de qualification des soudeurs pour le soudage sous leau Partie 1: Soudage hyperbare en pleine eau (ISO 156181:2016);Version anglaise EN ISO 156181:2016,Traduction anglaise de DIN EN ISO 15618-1:2016-12

4、SupersedesDIN EN ISO 156181:200204www.beuth.deDocument comprises 31 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17 DIN EN ISO 15618-1:2016-12 2 A comma is used as the decimal marker. National foreword This document (EN I

5、SO 15618-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes”, Subcommittee SC 11 “Qualification requirements for welding and allied processes personnel” (Secretariat: ANSI, USA) in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes”

6、(Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-30 AA Unterwasserschweien (DVS AG V 4). The DIN Standards corresponding to

7、 the International Standards referred to in this document are as follows: ISO 4063 DIN EN ISO 4063 ISO 5173 DIN EN ISO 5173 ISO 5817 DIN EN ISO 5817 ISO 6947 DIN EN ISO 6947 ISO 9017 DIN EN ISO 9017 ISO 15609- DIN EN ISO 15609-1 ISO 17636-1 DIN EN ISO 17636-1 ISO 17636-2 DIN EN ISO 17636-2 ISO 17637

8、 DIN EN ISO 17637 ISO 17639 DIN EN ISO 17639 ISO 17640 DIN EN ISO 17640 ISO/TR 15608 DIN CEN ISO/TR 15608 (DIN SPEC 8517) Amendments This standard differs from DIN EN ISO 15618-1:2002-04 as follows: a) the standard has been technically and editorially revised. Previous editions DIN EN ISO 15618-1: 2

9、002-04 DIN EN ISO 15618-1:2016-12 3 National Annex NA (informative) Bibliography DIN EN ISO 4063, Welding and allied processes Nomenclature of processes and reference numbers DIN EN ISO 5173, Destructive tests on welds in metallic materials Bend tests DIN EN ISO 5817, Welding Fusion-welded joints in

10、 steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections DIN EN ISO 6947, Welding and allied processes Welding positions DIN EN ISO 9017, Destructive tests on welds in metallic materials Fracture test DIN EN ISO 15609-1, Specification and qualification of we

11、lding procedures for metallic materials Welding procedure specification Part 1: Arc welding DIN EN ISO 17636-1, Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film DIN EN ISO 17636-2, Non-destructive testing of welds Radiographic testing Part 2: X- and

12、 gamma-ray techniques with digital detectors DIN EN ISO 17637, Non-destructive testing of welds Visual testing of fusion-welded joints DIN EN ISO 17639, Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds DIN EN ISO 17640, Non-destructive testing of weld

13、s Ultrasonic testing Techniques, testing levels, and assessment DIN CEN ISO/TR 15608 (DIN SPEC 8517), Welding Guidelines for a metallic materials grouping system DIN EN ISO 15618-1:2016-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15618-1 September 2

14、016 ICS 25.160.01 Supersedes EN ISO 15618-1:2001English Version Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) preuve de qualification des soudeurs pour le soudage sous leau - Partie 1: Soudage hyperbare en pleine eau (ISO 15618-1:2016) Pr

15、fung von Schweiern fr Unterwasserschweien - Teil 1: Nassschweien unter berdruck(ISO 15618-1:2016) This European Standard was approved by CEN on 8 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

16、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French

17、, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, C

18、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an

19、d United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. N

20、o. EN ISO 15618-1:2016 EEuropean foreword 3Introduction 51 Scope .62 Normative references 63 Terms and definitions .74 Symbols and abbreviations .74.1 General . 74.2 Test piece . 74.3 Filler materials and fluxes . 84.4 Miscellaneous . 85 Essential variables for qualification testing 85.1 General . 8

21、5.2 Welding processes 85.3 Joint types (butt and fillet welds) . 95.4 Material groups 95.5 Filler materials and fluxes . 95.6 Dimensions . 95.7 Welding positions 105.8 Hyperbaric environment . 105.9 Visibility . 106 Range of qualification 1null6.1 General 106.2 Welding process 106.3 Joint types . 11

22、6.4 Material groups . 116.5 Filler materials . 126.6 Dimensions 126.7 Welding positions 126.8 Hyperbaric environment . 127 Examination and testing 147.1 General 147.2 Witnessing . 147.3 Shapes and dimensions of test pieces 147.4 Welder-diver qualification test criteria 167.5 Test methods 167.6 Test

23、pieces and test specimens 177.6.1 General. 177.6.2 Butt welds in plate and pipe . 177.6.3 Fillet welds on plate and pipe 187.7 Test report 208 Acceptance requirements for test pieces .9 Re-tests 2010 Period and confirmation of validity null2011 Revalidation of welder-diver qualification 2112 Welder-

24、diver qualification test certificate .2113 Designation .21Annex A (informative) Welder-diver qualification test certificate for hyperbaric wet welding23Annex B (informative) Job knowledge .25Contents PageBibliography .27Foreword 4DIN EN ISO 15618-1:2016-12EN ISO 15618-1:2016 (E)220European foreword

25、This document (EN ISO 15618-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a nat

26、ional standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

27、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 15618-1:2001. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea

28、n Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

29、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 15618-1:2016 has been approved by CEN as EN ISO 15618-1:2016 without any modification. DIN EN ISO 15618-1:2016-12EN ISO 15618-1:2016 (E)3 ForewordISO (the International Organization for Standardization)

30、 is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repre

31、sented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to devel

32、op this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/

33、IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during th

34、e development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning o

35、f ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThe committee responsible for this document

36、 is ISO/TC 44, Welding and allied processes, Subcommittee SC 11, Qualification requirements for welding and allied processes personnel.This second edition cancels and replaces the first edition (ISO 15618-1:2001), which has been technically revised.ISO 15618 consists of the following parts, under th

37、e general title Qualification testing of welders for underwater welding: Part 1: Hyperbaric wet welding Part 2: Diver-welders and welding operators for hyperbaric dry weldingRequests for official interpretations of any aspect of this International Standard should be directed to the Secretariat of IS

38、O/TC 44/SC 11 via your national standards body. A complete listing of these bodies can be found at www.iso.org.DIN EN ISO 15618-1:2016-12EN ISO 15618-1:2016 (E)4 IntroductionThis part of ISO 15618 covers the principles to be observed in the qualification testing of welder-diver performance for the f

39、usion welding of steels in a hyperbaric wet environment.The ability of the welder-diver to follow verbal or written instructions and testing of his skill are therefore important factors in ensuring the quality of the welded product.Testing of skill to this part of ISO 15618 depends on welding method

40、s in which uniform rules and test conditions are complied with, and standard test pieces are used.The principle of this part of ISO 15618 is that a qualification test qualifies a welder-diver not only for the conditions used in the test, but also for all other conditions which are considered easier

41、to weld in accordance with this part of ISO 15618. It is presumed that the welder-diver has received training and/or has industrial practice within the range of qualification.This part of ISO 15618 is intended to provide the basis for the mutual recognition by examining bodies for qualification rela

42、ting to the welder-divers competence in the various fields of application. Tests are to be carried out in accordance with this part of ISO 15618 unless additional tests are specified by the relevant application standard when these should be applied.The welder-divers skill and job knowledge continue

43、to be approved only if the welder-diver is working with reasonable continuity on welding work within the extent of qualification.DIN EN ISO 15618-1:2016-12EN ISO 15618-1:2016 (E)5 1 ScopeThis part of ISO 15618 specifies essential requirements, ranges of qualification, test conditions, acceptance req

44、uirements and certification for the qualification testing of welder-diver performance.This part of ISO 15618 is applicable for hyperbaric wet welding on steel.The recommended format for the certificate of qualification testing is given in Annex A.During the qualification test, the welder-diver may b

45、e required to show adequate job knowledge of the welding processes, materials and safety requirements for which he is to be qualified. Information on these aspects is given in Annex B.The welding processes referred to in this part of ISO 15618 include those fusion welding processes which are designa

46、ted as manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2).This part of ISO 15618 applies to all new qualifications from the date of issue.However, this part of ISO 15618 does not invalidate previous welder-diver qualifications made to form

47、er national standards or specifications, providing the intent of the technical requirements is satisfied and the previous qualifications are relevant to the application and production work on which they are employed.The certificate of qualification testing is issued under the sole responsibility of

48、the examiner or examining body.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4063, Welding and allied processes Nomenclature of processes and reference numbersISO 5173, Destructive tests on welds in metallic materials Be