DIN EN ISO 15973-2001 Closed end blind rivets with break pull mandrel and protruding head - AlA St (ISO 15973 2000) German version EN ISO 15973 2000《带断点牵引心轴和突出头的封口式空心单面压装铆钉 AlA St》.pdf

1、ICS 21.060.40Geschlossene Blindniete mit Sollbruchdorn und Flachkopf AlA/St (ISO 15973 : 2000)European Standard EN ISO 15973 : 2000 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 1

2、85 to adopt, withoutalteration, International Standard ISO 15973 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Mechanische Verbin-dungselemente (Fasteners Standards Committee), Technical Committee Niete.The DIN Standards corresponding to the I

3、nternational Standards referred to in clause 2 of the EN are asfollows:ISO 3269 DIN EN ISO 3269ISO 14588 DIN EN ISO 14588ISO 14589 DIN EN ISO 14589National Annex NAStandards referred to(and not included in Normative references and Annex ZA)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 :

4、2000)DIN EN ISO 14588 Blind rivets Terminology and definitions (ISO 14588 : 2000)DIN EN ISO 14589 Blind rivets Mechanical testing (ISO 14589 : 2000)Ref. No. DIN EN ISO 15973 : 2001-08English price group 06 Sales No. 110612.01DEUTSCHE NORM August 2001EN ISO 15973Continued overleaf.EN comprises 8 page

5、s. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Closed end blind rivets with break pull mandrel andprotruding head

6、AlA/St(ISO 15973 : 2000)English version of DIN EN ISO 15973English versionICS 21.060.40Closed end blind rivets with break pull mandreland protruding head AlA/St(ISO 15973 : 2000) 2000. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN

7、ISO 15973 : 2000 EGeschlossene Blindniete mit Soll-bruchdorn und Flachkopf AlA/St(ISO 15973 : 2000)This European Standard was approved by CEN on 2000-12-15.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the st

8、atus of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A versio

9、n in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France,

10、Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.EN ISO 15973December 2000Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Kom

11、itee fr NormungRivets aveugles rupture de tige corps ferm, tte bombe AlA/St(ISO 15973 : 2000)Page 2EN ISO 15973 : 2000ForewordInternational StandardISO 15973 : 2000 Closed end blind rivets with break pull mandrel and protruding head AlA/St,which was prepared by ISO/TC 2 Fasteners of the Internationa

12、l Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and acces-sories, the Secretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by pu

13、blication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by June 2001 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, B

14、elgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 15973 : 2000 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 15973 : 2000Page 4EN ISO 15973 : 2000Page 5EN ISO 15973 : 2000Page 6EN ISO 15973 : 2000Page 7EN ISO 15973 : 2000Page 8EN ISO 15973 : 2000