DIN EN ISO 15979-2003 Open end blind rivets with break pull mandrel and protruding head - St St (ISO 15979 2002) German version EN ISO 15979 2002《开口型盘头抽芯盲铆钉 St St》.pdf

1、ICS 21.060.40Offene Blindniete mit Sollbruchdorn und Flachkopf St/St(ISO 15979 : 2002)European Standard EN ISO 15979 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 185 to ad

2、opt, withoutalteration, International Standard ISO 15979 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Niete.DIN EN ISO 3269 is the standard corresponding to I

3、nternational Standard ISO 3269 referred to in clause 2of the EN.AmendmentsDIN 7337, August 1991 edition, has been superseded by the specifications of EN ISO 15979, which isidentical to ISO 15979.Previous editionsDIN 7337: 1985-05, 1985-07, 1991-08.National Annex NAStandard referred to(and not includ

4、ed in Normative references)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)Ref. No. DIN EN ISO 15979 : 2003-04English price group 07 Sales No. 110708.03DEUTSCHE NORM April 2003EN ISO 15979Continued overleaf.EN comprises 7 pages. No part of this standard may be reproduced without the

5、 prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Open end blind rivets with break pull mandrel andprotruding head St/St(ISO 15979 : 2002)English version of DIN EN ISO 15979T

6、his standard, together withDIN EN ISO 14589, August 2001edition, DIN EN ISO 15977 andDIN EN ISO 15978,DIN EN ISO 15980 toDIN EN ISO 15984, andDIN EN ISO 16582 toDIN EN ISO 16584, April 2003editions, supersedes DIN 7337,August 1991 edition.English versionICS 21.060.40Management Centre: rue de Stassar

7、t 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungOpen end blind rivets with break pull mandrel andprotruding head St/St(ISO 15979 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN

8、national members.Ref. No. EN ISO 15979 : 2002 ERivets aveugles rupture de tige corps ouvert, tte bombe St/St(ISO 15979 : 2002)Offene Blindniete mit Sollbruchdornund Flachkopf St/St(ISO 15979 : 2002)This European Standard was approved by CEN on 2002-10-14.CEN members are bound to comply with the CEN/

9、CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any C

10、ENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members a

11、re the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom.EN ISO 15979November 2002Page 2EN ISO 15979 : 2002Fore

12、wordInternational StandardISO 15979 : 2002 Open end blind rivets with break pull mandrel and protruding head St/St,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fa

13、steners and acces-sories, the Secretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by May 2003 at the latest.In a

14、ccordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherla

15、nds, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 15979 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 15979 : 2002Page 4EN ISO 15979 : 2002Page 5EN ISO 15979 : 2002Page 6EN ISO 15979 : 2002Page 7EN ISO 15979 : 2002