DIN EN ISO 15983-2003 Open end blind rivets with break pull mandrel and protruding head - A2 A2 (ISO 15983 2002) German version EN ISO 15983 2002《开口型盘头抽芯盲铆钉 A2 A2》.pdf

1、ICS 21.060.40Offene Blindniete mit Sollbruchdorn und Flachkopf A2/A2(ISO 15983 : 2002)European Standard EN ISO 15983 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 185 to ad

2、opt, withoutalteration, International Standard ISO 15983 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Niete.DIN EN ISO 3269 is the standard corresponding to I

3、nternational Standard ISO 3269 referred to in clause 2of the EN.AmendmentsDIN 7337, August 1991 edition, has been superseded by the specifications of EN ISO 15983, which isidentical to ISO 15983.Previous editionsDIN 7337: 1985-05, 1985-07, 1991-08.National Annex NAStandard referred to(and not includ

4、ed in Normative references)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)Ref. No. DIN EN ISO 15983 : 2003-04English price group 07 Sales No. 110708.03DEUTSCHE NORM April 2003EN ISO 15983Continued overleaf.EN comprises 7 pages. No part of this standard may be reproduced without the

5、 prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Open end blind rivets with break pull mandrel andprotruding head A2/A2(ISO 15983 : 2002)English version of DIN EN ISO 15983T

6、his standard, together withDIN EN ISO 14589, August 2001edition, DIN EN ISO 15977 toDIN EN ISO 15982,DIN EN ISO 15984, andDIN EN ISO 16582 toDIN EN ISO 16584, April 2003editions, supersedes DIN 7337,August 1991 edition.English versionICS 21.060.40Management Centre: rue de Stassart 36, B-1050 Brussel

7、sEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungOpen end blind rivets with break pull mandrel andprotruding head A2/A2(ISO 15983 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref

8、. No. EN ISO 15983 : 2002 ERivets aveugles rupture de tige corps ouvert, tte bombe A2/A2(ISO 15983 : 2002)Offene Blindniete mit Sollbruchdornund Flachkopf A2/A2(ISO 15983 : 2002)This European Standard was approved by CEN on 2002-10-14.CEN members are bound to comply with the CEN/CENELEC Internal Reg

9、ulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The Europea

10、n Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national stan

11、dards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom.EN ISO 15983November 2002Page 2EN ISO 15983 : 2002ForewordInternational St

12、andardISO 15983 : 2002 Open end blind rivets with break pull mandrel and protruding head A2/A2,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and acces-so

13、ries, the Secretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by May 2003 at the latest.In accordance with the C

14、EN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portuga

15、l, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 15983 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 15983 : 2002Page 4EN ISO 15983 : 2002Page 5EN ISO 15983 : 2002Page 6EN ISO 15983 : 2002Page 7EN ISO 15983 : 2002