DIN EN ISO 16139-2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139 2006) English version of DIN EN ISO 16139 2006-06《工业阀 热塑性材料的门阀》.pdf

1、 DEUTSCHE NORM June 2006DIN EN ISO 16139 ICS 23.060.30 Supersedes: see below Industrial valves Gate valves of thermoplastics materials (ISO 16139:2006) English version of DIN EN ISO 16139:2006-06 Industriearmaturen Schieber aus Thermoplasten (ISO 16139:2006) Englische Fassung DIN EN ISO 16139:2006-0

2、6 Together with DIN EN ISO 16135:2006-06, DIN EN ISO 16136:2006-06, DIN EN ISO 16137:2006-06, DIN EN ISO 16138:2006-06 and DIN EN ISO 21787:2006-06 supersedes DIN 3441-1:1989-05 and DIN 3442-1:1987-05; supersedes DIN 3441-6:1988-03 Document comprises 20 pages No part of this standard may be reproduc

3、ed without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 11 www.din.de www.beuth.de !,o9y“11.06 9762286DIN EN ISO 16139:2006-06 2 National foreword

4、This standard has been published in accordance with a decision taken by CEN/TC 69 to adopt, without alteration, International Standard ISO 16139 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Armaturen (Valves Standards Committee), Technical C

5、ommittee NAA-69/16 Kunststoffarmaturen. Amendments This standard differs from DIN 3441-1:1989-05, DIN 3441-6:1988-03 and DIN 3442-1:1987-05 as follows: The content has been fully revised, re-structured, and harmonized with design standards for other types of valve. In particular, the scope has been

6、extended to include valves of the materials ABS, PE, PP, PVC-C and PVDF, for all materials, the pressure/temperature rating is now specified for the complete valve, the range of nominal sizes has been extended up to DN 350, nominal pressure PN 16 and class 150 have been introduced, the overall heigh

7、t of valves is no longer specified, the number of possible valve end connections has been extended, material requirements have been harmonized with those specified in European material standards, design characteristics and functional characteristics are now specified, and more test procedures are co

8、vered, Annex ZA (informative) on the relationship between EU Directive 97/23/EC (Pressure Equipment Directive) and this standard has been included, and manufacturing requirements (testing of raw materials, permanent jointing by means of welding or cementing) and requirements regarding storage and tr

9、ansportation are now included. Previous editions DIN 3441-1: 1982-07, 1989-05 DIN 3442-1: 1980-10, 1987-05 DIN 3441-6: 1988-03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16139 March 2006 ICS 23.060.30 English Version Industrial valves - Gate valves of thermoplastics materials (ISO 1613

10、9:2006) Robinetterie industrielle - Robinets-vannes en matriaux thermoplastiques (ISO 16139:2006) Industriearmaturen - Schieber aus Thermoplasten (ISO 16139:2006) This European Standard was approved by CEN on 3 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi

11、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Sta

12、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national sta

13、ndards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EU

14、ROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16139:2006: EEN ISO 1

15、6139:2006 (E) 2 Foreword This document (EN ISO 16139:2006) has been prepared by Technical Committee CEN/TC 69 ”Industrial valves”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”. This E

16、uropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. This document has been prepared under a mandate giv

17、en to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the na

18、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

19、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 16139:2006 (E) 3 Contents Page Foreword .2 1 Scope4 2 Normative references4 3 Terms and definitions .5 4 Requirements.7 4.1 Design.7 4.2 Materials .8 4.3 Pressure/temperature rating 8 4.4 Dimensions 9 4.5 Op

20、eration10 4.6 Functional characteristics10 4.7 Manufacture .11 4.8 Other requirements .11 5 Test procedures.12 5.1 Documentation of test results12 5.2 Initial type tests .12 6 Declaration of compliance13 7 Designation 13 8 Marking and preparation for storage and transportation14 8.1 Marking and docu

21、mentation 14 8.2 Preparation for storage and transportation15 Annex A (informative) Procurement information.16 Bibliography17 Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 97/23 EC (PED).18 EN ISO 16139:2006 (E) 4 1 Scope This

22、International Standard specifies requirements for the design, functional characteristics and manufacture of gate valves made of thermoplastics materials intended for isolating service, their connection to the pipe system, the body materials and their pressure/temperature rating between 40 C and + 12

23、0 C, for a lifetime of 25 years, and also specifies their tests. This International Standard is applicable to hand- or power-operated valves to be installed in industrial pipe systems, irrespective of the field of application and the fluids to be conveyed. NOTE 1 Industrial pipe systems also include

24、 systems for water supply for general purposes, drainage and sewerage. NOTE 2 Special requirements can apply to pipe systems for water for human consumption. This International Standard is concerned with the range of DN DN 10, DN 15, DN 20, DN 25, DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150,

25、DN 200, DN 250, DN 300 and DN 350. and the range of PN and Class PN 6, PN 10, PN 16, and Class 150. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the late

26、st edition of the referenced document (including any amendments) applies. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensi

27、ons, tolerances and designation ISO 898-1:1999, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs ISO 5210:1991, Industrial valves Multi-turn valve actuator attachments ISO 8233:1988, Thermoplastics valves Torque Test method ISO 8659:1989, Thermo

28、plastic valves Fatigue strength Test method ISO 9393-2:2005, Thermoplastics valves for industrial applications Pressure test methods and requirements Part 2: Test conditions and basic requirements ISO/TR 10358:1993, Plastics pipes and fittings Combined chemical-resistance classification table EN ISO

29、 16139:2006 (E) 5 ISO 10931:2005, Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system ISO 12092:2000, Fittings, valves and other piping system components, made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated pol

30、y(vinyl chloride) (PVC-C) acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure Resistance to internal pressure Test method ISO 12162:1995, Thermoplastics materials for pipes and fittings for pressure applications Classification and designation Ove

31、rall service (design) coefficient ISO 15493:2003, Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series ISO 15494:20

32、03, Plastics piping systems for industrial applications Polybutene (PB), polyethylene (PE) and polypropylene (PP) Specifications for components and the system Metric series EN 558-1:1995, Industrial valves Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems Par

33、t 1: PN-designated valves EN 558-2:1995, Industrial valves Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems Part 2: Class-designated valves EN 736-1:1995, Valves Terminology Part 1: Definition of types of valves EN 736-2:1997, Valves Terminology Part 2: Defi

34、nition of components of valves EN 736-3:1999, Valves Terminology Part 3: Definition of terms EN 1092-1:2001, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 1: Steel flanges EN 1267:1999, Valves Test of flow resistance using water as test flu

35、id EN 1759-1:2004, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, Class designated Part 1: Steel flanges, NPS to 24 EN 12107:1997, Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination of the long-term

36、hydrostatic strength of thermoplastics materials for injection moulding of piping components EN 12266-1:2003, Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12570:2000, Industrial valves Method for sizing the operating el

37、ement 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 736-1, EN 736-2 and EN 736-3 and the following apply. NOTE Other terms and definitions relative to thermoplastics materials are given in ISO 15493, ISO 15494 and ISO 10931. EN ISO 16139:2006 (E) 6

38、3.1 nominal size DN alphanumeric designation of size for components of a pipework system, which is used for reference purposes, comprising the letters DN followed by a dimensionless whole number which is indirectly related to the physical size, in millimetres, of the bore or outside diameter of the

39、end connections ISO 6708:1995, definition 2.1 3.2 nominal pressure PN numerical designation relating to pressure that is a convenient round number for reference purposes NOTE 1 It is intended that all equipment of the same nominal size (DN) designated by the same PN number have the same mating dimen

40、sions appropriate to the type of end connections. NOTE 2 The permissible working pressure depends upon materials, design and working temperature and is to be selected from the pressure/temperature rating tables in corresponding standards. ISO 7268:1983, Clause 2 3.3 Class alphanumeric designation us

41、ed for reference purposes related to a combination of mechanical and dimensional characteristics of a component of a pipework system, which comprises the word “Class” followed by a dimensionless whole number NOTE The number following the word “Class” does not represent a measurable value and is not

42、intended to be used for calculation purposes except where specified in the relevant standard. 3.4 allowable maximum operating pressure PMA maximum pressure occurring from time to time, including surge, that a component is capable of withstanding in service EN 805:2000, definition 3.1.1 NOTE EU Direc

43、tive 97/23/EC (PED) designates PS (maximum allowable pressure) irrespective of temperature. The values of PMA and PS are identical at 20 C. 3.5 trim inside parts of the valve in contact with the fluid NOTE Adapted from EN 736-2:1997, definition 3.2. 3.6 rating factor frrating factor used in the rela

44、tionship between PMA and PN or Class and to calculate the PMA at temperatures other than 20 C 3.7 manual forces F and Fsoperating manual force (F) and maximum manual force (Fs) which one person is capable of applying to the manual operating element of a valve NOTE Adapted from EN 12570:2000. EN ISO

45、16139:2006 (E) 7 4 Requirements 4.1 Design 4.1.1 Valve function Gate valves in accordance with this International Standard shall be suitable for isolating service. 4.1.2 Design characteristics Valves shall have the following design characteristics: a) a symmetrical design of valve obturation suitabl

46、e for both flow directions; b) a body bore that is either full bore i.e. not less than 90 % of DN expressed in millimetres (mm), or reduced bore, in which case the manufacturer shall declare the actual bore diameter; c) a system of obturation which, in the fully open position, does not intrude into

47、the bore; d) a soft seat method of obturation with sealing elements on the obturator or in the valve body; e) a stem sealing system by a stuffing box or by self-sealing elements. 4.1.3 Types of valve end connection The types of valve end connection can be chosen from the following alternatives: butt

48、 or socket fusion ends; spigot ends for cementing or for welding; socket ends for electro-fusion; socket ends for heated tool welding; socket ends for cementing; socket ends for/with elastomeric seal rings; flanged ends; wafer type ends; threaded ends; union ends. Other types of end connection are p

49、ossible. All valve ends shall be an integral part of, or threaded onto, the valve body. Different types of end connection on one body are possible. EN ISO 16139:2006 (E) 8 4.2 Materials 4.2.1 Materials for the body and bonnet/cover The valve body and bonnet/cover materials may be selected from ISO 15493 or ISO 15494 or ISO 10931, and shall be in accordance with the requirements of the relevant above International Standard: ABS; P