DIN EN ISO 16283-3-2016 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3 Fa ade sound insulation (ISO 16283-3 2016) German version E.pdf

1、September 2016 English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.120.20!%$n“2560175www.din.d

2、eDIN EN ISO 16283-3Acoustics Field measurement of sound insulation in buildings and of building elements Part 3: Faade sound insulation (ISO 162833:2016);English version EN ISO 162833:2016,English translation of DIN EN ISO 16283-3:2016-09Akustik Messung der Schalldmmung in Gebuden und von Bauteilen

3、am Bau Teil 3: Fassadenschalldmmung (ISO 162833:2016);Englische Fassung EN ISO 162833:2016,Englische bersetzung von DIN EN ISO 16283-3:2016-09Acoustique Mesurage in situ de lisolement acoustique des btiments et des lments de construction Partie 3: Isolement aux bruits de faades (ISO 162833:2016);Ver

4、sion anglaise EN ISO 162833:2016,Traduction anglaise de DIN EN ISO 16283-3:2016-09Together with DIN EN ISO 162831:201406 and DIN EN ISO 162832:201605 supersedes DIN EN ISO 14014:200411 and DIN EN ISO 14014 Corrigendum 1:200907;together with DIN EN ISO 162831:201406, supersedes DIN EN ISO 1405:199812

5、 and DIN EN ISO 1405 Corrigendum 1:200810Supersedes: see belowwww.beuth.deDocument comprises 47 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.08.16 DIN EN ISO 16283-3:2016-09 2 A comma is used as the decimal marker. National

6、foreword This document (EN ISO 16283-3:2016) has been prepared by Technical Committee ISO/TC 43 “Acoustics, Subcommittee SC 2 “Building acoustics” (Secretariat: DIN, Germany) in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” (Secretariat

7、: AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-02-31 AA Schalldmmung und Schallabsorption, Messung und Bewertung. Users of this standard may reproduce the form give

8、n in Annex F, without prejudice to the rights of DIN regarding the rest of the document. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 717-1 DIN EN ISO 717-1 ISO 3382-2 DIN EN ISO 3382-2 ISO 12999-1 DIN EN ISO 12999-1 ISO 15712-3 DIN

9、EN 12354-3 ISO 18233 DIN EN ISO 18233 IEC 60942 DIN EN 60942 IEC 61183 DIN EN 61183 IEC 61260 DIN EN 61260 IEC 61672-1 DIN EN 61672-1 Amendments This standard differs from DIN EN ISO 140-5:1998-12, DIN EN ISO 140-5 Corrigendum 1:2008-10, DIN EN ISO 140-14:2004-11 and DIN EN ISO 140-14 Corrigendum 1:

10、2009-07 as follows: a) the number of the standard has been changed; b) the title of the standard has been changed; c) it has been clarified how operators can measure the sound field using a hand-held microphone or sound level metre; d) the scope has been extended to include rooms with a non-diffuse

11、sound field. Previous editions DIN 52210-5: 1976-10, 1985-07 DIN EN ISO 140-5: 1998-12 DIN EN ISO 140-5 Corrigendum 1: 2008-10 DIN EN ISO 140-14: 2004-11 DIN EN ISO 140-14 Corrigendum 1: 2009-07 DIN EN ISO 16283-3:2016-09 3 National Annex NA (informative) Bibliography DIN EN 12354-3, Building acoust

12、ics Estimation of acoustic performance of buildings from the performance of elements Part 3: Airborne sound insulation against outdoor sound DIN EN 60942, Electroacoustics Sound calibrators DIN EN 61183, Electroacoustics Random-incidence and diffuse-field calibration of sound level meters DIN EN 612

13、60, Electroacoustics Octave-band and fractional-octave-band filters DIN EN 61672-1, Electroacoustics Sound level meters Part 1: Specifications DIN EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation DIN EN ISO 3382-2, Acoustics M

14、easurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms DIN EN ISO 12999-1, Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation DIN EN ISO 18233, Acoustics Application of new measurement methods in building a

15、nd room acoustics DIN EN ISO 16283 3:2016 09 - -4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16283-3 February 2016 ICS 91.120.20; 91.060.10 Supersedes EN ISO 140-14:2004, EN ISO 140-5:1998English Version Acoustics - Field measurement of sound insulation

16、 in buildings and of building elements - Part 3: Faade sound insulation (ISO 16283-3:2016) Acoustique - Mesurage in situ de lisolement acoustique des btiments et des lments de construction - Partie 3: Isolement aux bruits de faades (ISO 16283-3:2016) Akustik - Messung der Schalldmmung in Gebuden und

17、 von Bauteilen am Bau - Teil 3: Fassadenschalldmmung (ISO 16283-3:2016) This European Standard was approved by CEN on 2 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

18、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

19、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

20、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROP

21、EAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16283-3:2016

22、EForeword 5Introduction .61 Scope .72 Normative references 83 Terms and definitions .94 Instrumentation .144.1 General 144.2 Calibration .144.3 Verification 145 Frequency range 156 General .157 Indoor sound pressure level measurements .177.1 General 177.2 Default procedure 177.2.1 Fixed microphone p

23、ositions177.2.2 Mechanized continuously-moving microphone.177.2.3 Manually scanned microphone 177.2.4 Minimum distances for microphone positions .197.2.5 Averaging times .197.2.6 Calculation of energy-average sound pressure levels .207.3 Low-frequency procedure (element or global loudspeaker methods

24、) .217.3.1 General.217.3.2 Microphone positions .217.3.3 Averaging time 217.3.4 Calculation of low-frequency energy-average sound pressure levels .227.4 Background noise (default and low-frequency procedure) 227.4.1 General.227.4.2 Correction to the signal level for background noise 238 Reverberatio

25、n time measurements in the receiving room (default and low-frequency procedure) 238.1 General 238.2 Generation of sound field 238.3 Default procedure 248.4 Low-frequency procedure 248.5 Interrupted noise method 248.6 Integrated impulse response method 249 Outdoor measurements using a loudspeaker as

26、a sound source (default and low-frequency procedure) 259.1 General 259.2 Generation of the sound field 259.3 Loudspeaker requirements .259.4 Loudspeaker positions 269.5 Element loudspeaker method .269.5.1 Outdoor sound pressure level measurements on the test surface 269.6 Global loudspeaker method 2

27、79.6.1 Outdoor sound pressure level measurements near the faade 279.6.2 Large rooms or faades comprising more than one outside wall .279.6.3 Calculation of measurement results 27Contents PageEN ISO 16283-3:2016 (E) DIN EN ISO 16283-3:2016-09 2European foreword .410.2 Test requirements . 2810.3 Eleme

28、nt road traffic method 2810.3.1 General. 2810.3.2 Requirements on road traffic and faade geometry .2810.3.3 Outdoor sound pressure level measurements on the test surface 2910.4 Global road traffic method . 2910.4.1 Outdoor sound pressure level measurements at a distance of 2 m in front of the faade

29、2910.4.2 Calculation of measurement results 3011 Conversion to octave bands 3012 Expression of results .3113 Uncertainty 3214 Test report 32Annex A (normative) Determination of area, S.33Annex B (normative) Control of sound transmission through the wall surrounding the test specimen 34Annex C (norma

30、tive) Requirements for loudspeakers .35Annex D (informative) Examples of verification of test requirements 36Annex E (informative) Measurements with aircraft and railway traffic noise (default procedure) 37Annex F (informative) Forms for recording results .41Bibliography .43EN ISO 16283-3:2016 (E) D

31、IN EN ISO 16283-3:2016-09 310 Outdoor measurements using road traffic as a sound source (default procedure) 2710.1 General 27European foreword This document (EN ISO 16283-3:2016) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 126 “Acou

32、stic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards sh

33、all be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 140-14:

34、2004, EN ISO 140-5:1998. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic

35、of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16283-3:2016 has been appro

36、ved by CEN as EN ISO 16283-3:2016 without any modification. EN ISO 16283-3:2016 (E) DIN EN ISO 16283-3:2016-09 4 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards

37、is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take pa

38、rt in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particu

39、lar the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this

40、 document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.i

41、so.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the W

42、TO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This first edition cancels and replaces ISO 140-5:1998 and ISO 140-14:2004, whi

43、ch have been technically revised.ISO 16283 consists of the following parts, under the general title Acoustics Field measurement of sound insulation in buildings and of building elements: Part 1: Airborne sound insulation Part 2: Impact sound insulation Part 3: Faade sound insulationEN ISO 16283-3:20

44、16 (E) DIN EN ISO 16283-3:2016-09 5 IntroductionISO 16283 (all parts) describes procedures for field measurements of sound insulation in buildings. Airborne, impact, and faade sound insulation are described in ISO 16283-1, ISO 16283-2, and in this part of ISO 16283, respectively.Field sound insulati

45、on measurements that were described previously in ISO 140-4, ISO 140-5, and ISO 140-7 were (a) primarily intended for measurements where the sound field could be considered to be diffuse and (b) not explicit as to whether operators could be present in the rooms during the measurement. ISO 16283 diff

46、ers from ISO 140-4, ISO 140-5, and ISO 140-7 in that (a) it applies to rooms in which the sound field can or cannot approximate to a diffuse field, (b) it clarifies how operators can measure the sound field using a hand-held microphone or sound level metre, and (c) it includes additional guidance th

47、at was previously contained in ISO 140-14.NOTE Survey test methods for field measurements of faade sound insulation are dealt with in ISO 10052.EN ISO 16283-3:2016 (E) DIN EN ISO 16283-3:2016-09 6 1 ScopeThis part of ISO 16283 specifies procedures to determine the airborne sound insulation of faade

48、elements (element methods) and whole faades (global methods) using sound pressure measurements. These procedures are intended for room volumes in the range from 10 m3to 250 m3in the frequency range from 50 Hz to 5 000 Hz.The test results can be used to quantify, assess, and compare the airborne sound insulation in unfurnished or furnished rooms where the sound field can or cannot approximate to a diffuse field. The measured airborne sound insulation is frequency-dependen