DIN EN ISO 16474-1-2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1 General guidance (ISO 16474-1 2013) German version EN ISO 16474-1 2013《涂料和清漆.pdf

1、March 2014Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8

2、7.040!%,g2“2096815www.din.deDDIN EN ISO 16474-1Paints and varnishes Methods of exposure to laboratory light sources Part 1: General guidance (ISO 16474-1:2013);English version EN ISO 16474-1:2013,English translation of DIN EN ISO 16474-1:2014-03Beschichtungsstoffe Knstliches Bestrahlen oder Bewitter

3、n in Gerten Teil 1: Allgemeine Anleitung (ISO 16474-1:2013);Englische Fassung EN ISO 16474-1:2013,Englische bersetzung von DIN EN ISO 16474-1:2014-03Peintures et vernis Mthodes dexposition des sources lumineuses de laboratoire Partie 1: Lignes directrices gnrales (ISO 16474-1:2013);Version anglaise

4、EN ISO 16474-1:2013,Traduction anglaise de DIN EN ISO 16474-1:2014-03Together with DIN EN ISO 16474-2:2014-03, supersedes DIN EN ISO 11341:2004-12;together with DIN EN ISO 16474-3:2014-03, supersedes DIN EN ISO 11507:2007-05Supersedes: see belowwww.beuth.deIn case of doubt, the German-language origi

5、nal shall be considered authoritative.Document comprises 31 pages02.14 DIN EN ISO 16474-1:2014-03 2 A comma is used as the decimal marker. National foreword This document (EN ISO 16474-1:2013) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” in collaboration with Technical C

6、ommittee CEN/TC 139 “Paints and varnishes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Working Committee NA 002-00-07 AA Allgemeine Prfverfahr

7、en fr Beschichtungsstoffe und Beschichtungen. DIN EN ISO 16474 consists of the following parts, under the general title Paints and varnishes Methods of exposure to laboratory light sources: Part 1: General guidance Part 2: Xenon-arc lamps Part 3: Fluorescent UV lamps The DIN Standards corresponding

8、to the International Standards referred to in this document are as follows: ISO 1513 DIN EN ISO 1513 ISO 1514 DIN EN ISO 1514 ISO 2808 DIN EN ISO 2808 ISO 2810 DIN EN ISO 2810 ISO 2813 DIN EN ISO 2813 ISO 3270 DIN EN 23270 ISO 3668 DIN EN ISO 3668 ISO 4618 DIN EN ISO 4618 ISO 4628-1 DIN EN ISO 4628-

9、1 ISO 4628-2 DIN EN ISO 4628-2 ISO 4628-3 DIN EN ISO 4628-3 ISO 4628-4 DIN EN ISO 4628-4 ISO 4628-5 DIN EN ISO 4628-5 ISO 4628-6 DIN EN ISO 4628-6 ISO 4628-7 DIN EN ISO 4628-7 ISO 4628-8 DIN EN ISO 4628-8 ISO 4628-10 DIN EN ISO 4628-10 ISO 11664-4 DIN EN ISO 11664-4 ISO 15528 DIN EN ISO 15528 3 Amen

10、dments This standard differs from DIN EN ISO 11341:2004-12 and DIN EN ISO 11507:2007-05 as follows: a) general guidance on artificial weathering has been transferred to DIN EN ISO 16474-1; b) specifications concerning xenon-arc lamps have been transferred to DIN EN ISO 16474-2; c) specifications con

11、cerning fluorescent UV lamps have been transferred to DIN EN ISO 16474-3. Previous editions DIN 53231: 1972-09, 1991-04 DIN EN ISO 11341: 1998-02, 2004-12 DIN EN ISO 11507: 2002-01, 2007-05 National Annex NA (informative) Bibliography DIN EN 23270, Paints, varnishes and their raw materials Temperatu

12、res and humidities for conditioning and testing DIN EN ISO 1513, Paints and varnishes Examination and preparation of test samples DIN EN ISO 1514, Paints and varnishes Standard panels for testing DIN EN ISO 2808, Paints and varnishes Determination of film thickness DIN EN ISO 2810, Paints and varnis

13、hes Natural weathering of coatings Exposure and assessment DIN EN ISO 2813, Paints and varnishes Determination of specular gloss of non-metallic paint films at 20, 60 and 85 DIN EN ISO 3668, Paints and varnishes Visual comparison of the colour of paints DIN EN ISO 4618, Paints and varnishes Terms an

14、d definitions DIN EN ISO 4628-1, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system DIN EN ISO 4628-2, Paints and varnishes Evaluation of degrada

15、tion of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering DIN EN ISO 4628-3, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of un

16、iform changes in appearance Part 3: Assessment of degree of rusting DIN EN ISO 16474-1:2014-03 DIN EN ISO 16474-1:2014-03 4 DIN EN ISO 4628-4, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Par

17、t 4: Assessment of degree of cracking DIN EN ISO 4628-5, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of degree of flaking DIN EN ISO 4628-6, Paints and varnishes Evaluatio

18、n of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 6: Assessment of degree of chalking by tape method DIN EN ISO 4628-7, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defect

19、s, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method DIN EN ISO 4628-8, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessme

20、nt of degree of delamination and corrosion around a scribe or other artificial defect DIN EN ISO 4628-10, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 10: Assessment of degree of filifor

21、m corrosion DIN EN ISO 11664-4, Colorimetry Part 4: CIE 1976 L*a*b* Colour space DIN EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes Sampling EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM November 2013 ICS 87.040 Supersedes EN ISO 11341:2004, EN ISO 11507:2007English V

22、ersion Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) Peintures et vernis - Mthodes dexposition des sources lumineuses de laboratoire - Partie 1: Lignes directrices gnrales (ISO 16474-1:2013) Beschichtungsstoffe - Knstliches Bestr

23、ahlen oder Bewittern in Gerten - Teil 1: Allgemeine Anleitung (ISO 16474-1:2013) This European Standard was approved by CEN on 26 October 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n

24、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A

25、version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypru

26、s, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United King

27、dom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 164

28、74-1:2013 EEN ISO 16474-1 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references. 5 3 Terms and definitions 5 4 Principle 6 4.1 General 6 4.2 Significance 6 4.3 Use of accelerated tests with laboratory light sources 8 5 Requirements for laboratory exposure devices . 8 5.1 Irr

29、adiance 8 5.2 Temperature 10 5.3 Humidity and wetting . 12 5.4 Other requirements for the exposure device 13 6 Test specimens Preparation, replicates, storage and conditioning 13 6.1 Handling of test specimens 13 6.2 Form, shape, preparation 13 6.3 Number of test specimens 14 6.4 Storage and conditi

30、oning 14 7 Test conditions and procedure . 15 7.1 Set points for exposure conditions 15 7.2 Property measurements on test specimens . 15 8 Periods of exposure and evaluation of test results 16 8.1 General 16 8.2 Sampling . 16 8.3 Determination of changes in properties after exposure 16 8.4 Use of co

31、ntrol materials 16 8.5 Use of results in specifications 16 9 Test report . 17 Annex A (informative) Procedure for measuring the irradiance uniformity in the specimen exposure area . 19 Annex B (informative) Factors that decrease the degree of correlation between artificial accelerated weathering or

32、artificial accelerated irradiation exposures and actualuse exposures . 22 Annex C (informative) Solar spectral irradiance standard 25 Bibliography 26 2DIN EN ISO 16474-1:2014-03EN ISO 16474-1:2013 (E) Foreword This document (EN ISO 16474-1:2013) has been prepared by Technical Committee ISO/TC 35 Pai

33、nts and varnishes in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2014, and

34、 conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This doc

35、ument supersedes EN ISO 11341:2004, EN ISO 11507:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl

36、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of I

37、SO 16474-1:2013 has been approved by CEN as EN ISO 16474-1:2013 without any modification. “”3DIN EN ISO 16474-1:2014-03EN ISO 16474-1:2013 (E)IntroductionCoatings from paints, varnishes and similar materials are often used outdoors or in indoor locations where they are exposed to solar radiation or

38、to solar radiation behind glass for long periods. It is therefore very important to determine the effects of solar radiation, heat, moisture and other climatic stresses on the colour and other properties of polymers. Outdoor exposures to solar radiation and to solar radiation filtered by window glas

39、s are described in ISO 28109. However, it is often necessary to determine more rapidly the effects of light, heat and moisture on the physical, chemical and optical properties of coatings with artificial accelerated weathering or artificial accelerated irradiation exposures that use specific laborat

40、ory light sources. Exposures in these laboratory devices are conducted under more controlled conditions than found in natural environments and are intended to accelerate polymer degradation and product failures. Relating results from accelerated weathering or artificial accelerated irradiation expos

41、ures to those obtained in actual-use conditions is difficult because of variability in both types of exposure and because laboratory tests often do not reproduce all the exposure stresses experienced by coatings exposed in actual-use conditions. In addition, the increase in rate of degradation by th

42、e accelerated test compared with natural exposure conditions varies with the type of material and its formulation. No single laboratory exposure test can be specified as a total simulation of actual-use exposures. The relative durability of materials in actual-use exposures can be very different dep

43、ending on the location of the exposure because of differences in solar radiation, time of wetness, temperature, pollutants and other factors. Therefore, even if results from specific accelerated weathering or artificial accelerated irradiation exposures are found to be useful for comparing the relat

44、ive durability of materials exposed in a particular outdoor location or in particular actual-use conditions, it cannot be assumed that they will be useful for determining the relative durability of materials exposed in a different outdoor location or in different actual-use conditions.4DIN EN ISO 16

45、474-1:2014-03EN ISO 16474-1:2013 (E) 1 Scope1.1 This part of ISO 16474 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposin

46、g paints and varnishes to laboratory light sources. Information about such performance requirements is provided for producers of artificial accelerated weathering or artificial accelerated irradiation devices.1.2 This part of ISO 16474 also provides information on the interpretation of data from art

47、ificial accelerated weathering or artificial accelerated irradiation exposures.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

48、references, the latest edition of the referenced document (including any amendments) applies.ISO 1513, Paints and varnishes Examination and preparation of test samplesISO 1514, Paints and varnishes Standard panels for testingISO 2808, Paints and varnishes Determination of film thicknessISO 3270, Pai

49、nts and varnishes and their raw materials Temperatures and humidities for conditioning and testingISO 4618, Paints and varnishes Terms and definitionsISO 9370, Plastics Instrumental determination of radiant exposure in weathering tests General guidance and basic test methodISO 15528, Paints, varnishes and raw materials for paints and varnishes SamplingISO 16474-2, Paints