DIN EN ISO 1683-2015 Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683 2015) German version EN ISO 1683 2015《声学 声学和振动等级用基准参考值(ISO 1683-2015) 德文版本.pdf

1、September 2015Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 17.140.01!%F/“2351298www.din.deDDIN EN ISO 1683Acoustics Preferred reference values for acoustical and vibratory levels(ISO 1683:2015);English version EN ISO 1683:2015,English translation of DIN EN ISO 1683:2015-09Akustik Bevorzugte Bezugswerte fr Pegel in der Akustik und Schwingungstechnik(ISO 16

3、83:2015);Englische Fassung EN ISO 1683:2015,Englische bersetzung von DIN EN ISO 1683:2015-09Acoustique Valeurs de rfrence recommandes pour les niveaux acoustiques et vibratoires(ISO 1683:2015);Version anglaise EN ISO 1683:2015,Traduction anglaise de DIN EN ISO 1683:2015-09SupersedesDIN EN ISO 1683:2

4、008-11www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 10 pages08.15 DIN EN ISO 1683:2015-09 2 A comma is used as the decimal marker. National foreword This document (EN ISO 1683:2015) has been prepared by Technical Committee ISO/TC 43 “

5、Acoustics” in collaboration with Technical Committee CEN/TC 211 “Acoustics” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwin-gungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering St

6、andards Committee in DIN and VDI), Working Committee NA 001-01-02 AA Akustik Geruschimmission Grundlagen, Ermittlung, Beurteilung. Throughout the revision of ISO 1683 the German mirror committee and other German experts argued vehemently for the specification of m/sn500=v as a preferred velocity ref

7、erence value, in the light of the airborne sound quantities given in Table 1. However, the international majority was not in agreement with this well-founded request. From the point of view of the German mirror committee the preferred vibratory velocity reference value of m/sn10=v now given in Table

8、 3 has no correlation whatever to the other basic reference values for airborne sound quantities, and will necessitate corrections to numerous basic technical rules. This conflict can be solved by using the reference value m/sn500=v cited in footnote b to Table 3. Since footnotes in tables are norma

9、tive elements, use of this value will not compromise conformity with this standard. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 80000-8 DIN EN ISO 80000-8 For the International Standard referred to in the Bibliography of this document

10、there is no national standard available. Amendments This standard differs from DIN EN ISO 1683:2008-11 as follows: a) sound quantities in air are also applicable for sound quantities in gases; b) reference values for various sound quantities in water and other liquids have been added; c) the standar

11、d has been editorially revised. Previous editions DIN 45630-1: 1967-09, 1970-02, 1971-12 DIN EN 21683: 1994-09 DIN EN ISO 1683: 2008-11 EN ISO 1683 May 2015 ICS 17.140.01 Supersedes EN ISO 1683:2008English Version Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2

12、015) Acoustique - Valeurs de rfrence recommandes pour les niveaux acoustiques et vibratoires (ISO 1683:2015) Akustik - Bevorzugte Bezugswerte fr Pegel in der Akustik und Schwingungstechnik (ISO 1683:2015) This European Standard was approved by CEN on 30 April 2015. CEN members are bound to comply wi

13、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

14、gement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same st

15、atus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

16、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

17、 Ref. No. EN ISO 1683:2015 EEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGContents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references. 5 3 Terms and definitions 5 4 Specifications .

18、6 4.1 Reference values for airborne sound quantities 6 4.2 Reference values for sound quantities in liquids . 6 4.3 Reference values for vibratory quantities . 7 Bibliography 8 2DIN EN ISO 1683:2015-09 EN ISO 1683:2015 (E) ForewordThis document (EN ISO 1683:2015) has been prepared by Technical Commi

19、ttee ISO/TC 43 “Acoustics” in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015,

20、and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.

21、This document supersedes EN ISO 1683:2008. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

22、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 1683:2015

23、 has been approved by CEN as EN ISO 1683:2015 without any modification. 3DIN EN ISO 1683:2015-09EN ISO 1683:2015 (E)IntroductionVarious kinds of acoustical and vibratory levels expressed in decibels are commonly used in acoustics. In order to establish a uniform basis for the expression of those lev

24、els, a set of agreed reference values is needed.The reference value determines whether the level for a particular quantity is positive or negative. For general measurements and many engineering specifications, it is desirable that levels of a given kind be consistently positive (or consistently nega

25、tive) rather than both positive and negative.In general, a reference value is expressed as the number one and a derived SI unit formed by the use of an appropriate SI prefix.The values specified in this International Standard represent the values internationally adopted.For airborne sound, a special

26、 reference value for sound pressure is stated according to widespread use and legal implications.4DIN EN ISO 1683:2015-09 EN ISO 1683:2015 (E) 1 ScopeThis International Standard specifies reference values used in acoustics, in order to establish a uniform basis for the expression of acoustical and v

27、ibratory levels.The reference values are mandatory for use in acoustics for sounds in air and other gases, sounds in water and other liquids, and for structure-borne sound, but can also be used in other applications.2 Normative referencesThe following documents, in whole or in part, are normatively

28、referenced in this document and are indispensable to its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 2041, Mechanical vibration, shock and condition monitoring Vocabula

29、ryISO/TR 25417, Acoustics Definitions of basic quantities and termsISO 80000-8, Quantities and units Part 8: Acoustics3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 2041, ISO/TR 25417, ISO 80000-8, and the following apply.3.1reference valuequantity v

30、alue used as a basis for comparison with values of quantities of the same kindSOURCE: ISO/IEC Guide 99:2007, 5.18Note 1 to entry: For the purposes of this International Standard, a reference value is expressed in terms of a number and an appropriate unit of measurement used to form a ratio of dimens

31、ion one when defining a logarithmic quantity.5DIN EN ISO 1683:2015-09EN ISO 1683:2015 (E)4 Specifications4.1 Reference values for airborne sound quantitiesReference values for various sound quantities in air and other gases are given in Table 1.Table 1 Reference values for sound quantities in air an

32、d gasesQuantity Reference valueaSound pressure 20 PaSound exposure (20 Pa)2sSound power 1 pWSound energy 1 pJSound intensity 1 pW/m2aThe reference value used to establish a level for a certain acoustical quantity should always be stated together with the respective level.4.2 Reference values for sou

33、nd quantities in liquidsReference values for various sound quantities in water and other liquids are given in Table 2.Table 2 Reference values for sound quantities in water and other liquidsQuantity Reference valueaSound pressureb1 PaSound exposure 1 Pa2sSound power 1 pWSound energy 1 pJSound intens

34、ity 1 pW/m2Sound particle displace-ment1 pmSound particle velocity 1 nm/sSound particle acceleration 1 m/s2Distancec1 maThe reference value used to establish a level for a certain acoustical quantity should always be stated together with the respective level.b A sound pressure level with a reference

35、 value of 1 Pa is numerically 10 lg(202/12) dB, which is approximately 26,0 dB greater than the sound pressure level for the same sound pressure but with a reference value of 20 Pa.cThe reference value for distance is used to form reference values for compound quantities, such as the product of soun

36、d pressure and distance (for which the reference value is 1 Pa m) or sound exposure and squared distance (for which the reference value is 1 Pa2m2s). Ratios of these compound quantities to other sound quantities lead to further compound quantities with dimensions of distance (with reference value 1

37、m) or area (with reference value 1 m2).6DIN EN ISO 1683:2015-09 EN ISO 1683:2015 (E) 4.3 Reference values for vibratory quantitiesReference values for various vibratory quantities are given in Table 3.Table 3 Reference values for vibratory quantitiesQuantity Reference valueaVibratory displacement 1

38、pmVibratory velocityb1 nm/sVibratory acceleration 1 m/s2Vibratory force 1 NaThe reference value used to establish a level for a certain vibratory quantity should always be stated together with the respective level.bIn connection with structure-borne sound, a reference value of 50 nm/s is also in use

39、. In this event, the vibratory velocity level takes values close to the associated sound pressure and sound intensity levels.7DIN EN ISO 1683:2015-09EN ISO 1683:2015 (E)Bibliography1 ISO/IEC Guide 99:2007, International vocabulary of metrology Basic and general concepts and associated terms (VIM)8DIN EN ISO 1683:2015-09 EN ISO 1683:2015 (E)