DIN EN ISO 17634-2015 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634 2015) German version E.pdf

1、December 2015 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.20!%IZ“2389355www.din.de

2、DIN EN ISO 17634Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification (ISO 17634:2015);English version EN ISO 17634:2015,English translation of DIN EN ISO 17634:2015-12Schweizustze Flldrahtelektroden zum Metall-Schutzgasschweien von

3、warmfesten Sthlen Einteilung (ISO 17634:2015);Englische Fassung EN ISO 17634:2015,Englische bersetzung von DIN EN ISO 17634:2015-12Produits consommables pour le soudage Fils-lectrodes fourrs pour le soudage larc avec gaz de protection des aciers rsistant au fluage Classification (ISO 17634:2015);Ver

4、sion anglaise EN ISO 17634:2015,Traduction anglaise de DIN EN ISO 17634:2015-12SupersedesDIN EN ISO 17634:2006-06www.beuth.deDocument comprises 31 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.15DIN EN ISO 17634:2015-12 2

5、A comma is used as the decimal marker. National foreword This document (EN ISO 17634:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” (Secretariat AFNOR, France) in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” (Secretariat: D

6、IN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-03 AA Schweizustze (DVS AG W 5). The DIN Standards corresponding to the International Sta

7、ndards referred to in this document are as follows: ISO 544 DIN EN ISO 544 ISO 3690 DIN EN ISO 3690 ISO 6847 DIN EN ISO 6847 ISO 6947:2011 DIN EN ISO 6947:2011-08 ISO 13916 DIN EN ISO 13916 ISO 14175:2008 DIN EN ISO 14175:2008-06 ISO 14344 DIN EN ISO 14344 ISO 15792-1:2000/Amd 1:2011 DIN EN ISO 1579

8、2-1:2012-01 ISO 15792-3 DIN EN ISO 15792-3 ISO 80000-1:2009 DIN EN ISO 80000-1:2013-08 Amendments This standard differs from DIN EN ISO 17634:2006-06 as follows: a) some values for Mn and P in Table 1 “Symbol for chemical composition of all-weld metal” have been adjusted (B page only); b) some value

9、s for minimum proof strength and tensile strength in Table 2 “Mechanical properties of all-weld metal” have been adjusted (B page only); c) symbols for shielding gases have been brought into accordance with ISO 14175; d) Clause 7 “Rounding procedure” has replaced Subclause 4.8 “Rounding-off procedur

10、e”; e) values for required average heat input in Table 6B “Pass and layer sequence” have been adjusted and the diameter 4,0 mm has been added (B page only); f) test positions in Table 7A “Test requirements for fillet welds” have been brought in line with ISO 6947:2011, instead of test position PD or

11、 PG, now test position PF; g) in the example of designation in Clause 11, the entry for shielding gas has been brought in line with ISO 14175; h) normative references and bibliography have been updated. Previous editions DIN EN 12071: 2000-01 DIN EN ISO 17634: 2006-06 DIN EN ISO 17634:2015-12 3 Nati

12、onal Annex NA (informative) Bibliography DIN EN ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings DIN EN ISO 3690, Welding and allied processes Determination of hydrogen content in arc weld metal DIN EN ISO

13、 6847, Welding consumables Deposition of a weld metal pad for chemical analysis DIN EN ISO 6947:2011-08, Welding and allied processes Welding positions (ISO 6947:2011) DIN EN ISO 13916, Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance tempe

14、rature DIN EN ISO 14175:2008-06, Welding consumables Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) DIN EN ISO 14344, Welding consumables Procurement of filler materials and fluxes DIN EN ISO 15792-1:2012-01, Welding consumables Test methods Part 1: Test methods for

15、all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000 + Amd 1:2011) DIN EN ISO 15792-3, Welding consumables Test methods Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld DIN EN ISO 80000-1:2013-08, Quantit

16、ies and units Part 1: General (ISO 80000-1:2009 + Cor 1:2011) DIN EN ISO 17634:2015-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17634 August 2015 ICS 25.160.20 Supersedes EN ISO 17634:2006English Version Welding consumables - Tubular cored electrode

17、s for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015) Produits consommables pour le soudage - Fils-lectrodes fourrs pour le soudage larc avec gaz de protection des aciers rsistant au fluage - Classification (ISO 17634:2015) Schweizustze - Flldrahtelektroden

18、 zum Metall-Schutzgasschweien von warmfesten Sthlen - Einteilung (ISO 17634:2015) This European Standard was approved by CEN on 15 August 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n

19、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A

20、version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cypru

21、s, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United King

22、dom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 176

23、34:2015 EIntroduction 1 Scope .2 Normative references 3 Classification 4 Symbols and requirements 4.1 Symbol for the product/process 4.2 Symbol for the chemical composition of all-weld metal .4.3 Symbol for the mechanical properties of all-weld metal 4.4 Symbol for type of electrode core or the usab

24、ility characteristics of the electrodes 144.5 Symbol for shielding gas 144.6 Symbol for welding position 154.7 Symbol for hydrogen content of deposited metal 155 Mechanical tests .155.1 Tensile and impact tests . 155.2 Preheating and interpass temperatures 165.3 Pass sequence . 166 Chemical analysis

25、 167 Rounding procedure 168 Fillet weld test 179 Retests 1810 Technical delivery conditions 1811 Example of designation 18Annex A (informative) Classification systems Annex B (informative) Description of composition designations of electrode in the classification system based upon tensile strength a

26、nd chemical composition Annex C (informative) Description of types of electrode core in the classification system based upon chemical composition .24Annex D (informative) Description of types of usability characteristics in the classification system based upon tensile strength and chemical compositi

27、on .25Annex E (informative) Notes on hydrogen content .26Bibliography .2Contents Page34556777721237European foreword2EN ISO 17634:2015 (E) DIN EN ISO 17634:2015-12 European foreword This document (EN ISO 17634:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in

28、 collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, and confli

29、cting national standards shall be withdrawn at the latest by February 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This docum

30、ent supersedes EN ISO 17634:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

31、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17634:2015 has bee

32、n approved by CEN as EN ISO 17634:2015 without any modification. 3EN ISO 17634:2015 (E) DIN EN ISO 17634:2015-12 IntroductionThis International Standard provides a classification system for tubular cored electrodes in terms of chemical composition of the all-weld metal, type of electrode core, type

33、of shielding gas, and welding position or in terms of the tensile properties, chemical composition of the all-weld metal, usability characteristics of the electrodes, shielding gas, and welding position. The ratio of proof to tensile strength of weld metal is generally higher than that of parent met

34、al. Matching weld metal proof strength to parent metal proof strength will not necessarily ensure that the weld metal tensile strength matches that of the parent metal. Where the application requires matching tensile strength, therefore, selection of consumables is made by reference to column 4 of T

35、able 2.Of note is that the mechanical properties of all-weld metal test specimens used to classify the tubular cored electrodes will vary from those obtained in production joints because of differences in welding procedure such as electrode size, width of weave, welding position, and parent metal co

36、mposition.The classification according to system A is mainly based on EN 12071:1999. The classification according to system B is mainly based upon standards used around the Pacific Rim.4EN ISO 17634:2015 (E) DIN EN ISO 17634:2015-12 1 ScopeThis International Standard specifies requirements for class

37、ification of tubular cored electrodes used in the post-weld heat-treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. One tubular cored electrode can be tested and classified with different shielding gases.This International Standard is a

38、 combined specification providing for classification utilizing a system based upon the chemical composition of all-weld metal or utilizing a system based upon the tensile strength and the chemical composition of all-weld metal.1) Paragraphs and tables which carry the suffix letter “A” are applicable

39、 only to tubular cored electrodes classified to the system based upon chemical composition with requirements for the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard.2) Paragraphs and tables which carry the suffix letter “B” are ap

40、plicable only to tubular cored electrodes classified to the system based upon the tensile strength and chemical composition of all-weld metal in accordance with this International Standard.3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable to a

41、ll tubular cored electrodes classified in accordance with this International Standard.It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not used for dete

42、rmining the electrode classification.2 Normative referencesThe following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

43、of the referenced document (including any amendments) applies.ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markingsISO 3690, Welding and allied processes Determination of hydrogen content in arc weld metalISO 6

44、947, Welding and allied processes Welding positionsISO 14175, Welding consumables Gases and gas mixtures for fusion welding and allied processesISO 14344, Welding consumables Procurement of filler materials and fluxesISO 15792-1:2000/Amd 1:2011, Welding Consumables Test methods Part 1: Test methods

45、for all-weld metal test specimens in steel, nickel and nickel alloysISO 15792-3, Welding consumables Test methods Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weldISO 80000-1:2009, Quantities and units Part 1: General5EN ISO 17634:2015

46、 (E) DIN EN ISO 17634:2015-12 3 ClassificationClassification designations are based upon two approaches to indicate the chemical composition, the tensile properties, and the impact properties of the all-weld metal obtained with a given electrode. The two designation approaches include additional des

47、ignators for some other classification requirements, but not all as will be clear from the following sections. In most cases, a given commercial product can be classified in both systems. Then, either or both classification designations can be used for the product.The classification includes all-wel

48、d metal properties obtained with a tubular cored electrode and appropriate shielding gas combination as given below. With the exception of the symbol for welding position which is based on ISO 15792-3, the classification is based on the tubular cored electrode size 1,2 mm or if this is not manufactu

49、red, the next larger diameter manufactured.3.1A Classification by chemical composition 3.1B Classification by tensile strength and chemical compositionThe classification is divided into six parts: The classification is divided into seven parts:1) The first part (T) indicates a tubular cored electrode.1) The first part (T) indicates a tubular cored electrode.2) The second part gives a symbol indicating the chemical composition of all-weld metal (see Table 1).2) The second part gives a symbol