DIN EN ISO 17831-1-2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1 Pellets (ISO 17831-1 2015) German version EN ISO 17831-1 2015《固体生.pdf

1、May 2016 English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 75.160.10!%UVj“2505171www.din.deDIN

2、EN ISO 17831-1Solid biofuels Determination of mechanical durability of pellets and briquettes Part 1: Pellets (ISO 17831-1:2015);English version EN ISO 17831-1:2015,English translation of DIN EN ISO 17831-1:2016-05Biogene Festbrennstoffe Bestimmung der mechanischen Festigkeit von Pellets und Brikett

3、s Teil 1: Pellets (ISO 17831-1:2015);Englische Fassung EN ISO 17831-1:2015,Englische bersetzung von DIN EN ISO 17831-1:2016-05Biocombustibles solides Dtermination de la rsistance mcanique des granuls et des briquettes Partie 1: Granuls (ISO 17831-1:2015);Version anglaise EN ISO 17831-1:2015,Traducti

4、on anglaise de DIN EN ISO 17831-1:2016-05SupersedesDIN EN 15210-1:2010-04www.beuth.deDocument comprises 16 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.05.16 DIN EN ISO 17831-1:2016-05 2 A comma is used as the decimal marker

5、 National foreword This document (EN ISO 17831-1:2015) has been prepared by Technical Committee ISO/TC 238 “Solid biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was DIN-Normenausschu

6、ss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-82 AA Biogene Festbrennstoffe. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 3310-2 DIN ISO 3310-2 ISO 14780 E DIN EN ISO 14780 ISO 16559 DIN E

7、N ISO 16559 ISO 17225-1 DIN EN ISO 17225-1 ISO 18134-1 DIN EN ISO 18134-1 ISO 18134-2 DIN EN ISO 18134-2 ISO 18135 E DIN EN ISO 18135 Amendments This standard differs from DIN EN 15210-1:2010-04 as follows: a) the content of EN ISO 17831-1 (based on EN 15210-1) has been adopted in full; b) the Germa

8、n translation of “solid biofuels” has been changed throughout the document from Feste Biobrennstoffe to Biogene Festbrennstoffe; c) references to EN Standards have been replaced by references to the relevant ISO Standards and have been updated; d) in Subclause 9.1, Table 1 giving precision data (rep

9、eatability and reproducibility limits) has been revised; e) the standard has been editorially revised. Previous editions DIN CEN/TS 15210-1: 2006-07 DIN EN 15210-1: 2010-04 DIN EN ISO 17831-1:2016-05 3 National Annex NA (informative) Bibliography E DIN EN ISO 14780, Solid biofuels Sample preparation

10、 DIN EN ISO 16559, Solid biofuels Terminology, definitions and description DIN EN ISO 17225-1, Solid biofuels Fuel specifications and classes Part 1: General requirements DIN EN ISO 18134-1, Solid biofuels Determination of moisture content Oven dry method Part 1: Total moisture Reference method DIN

11、EN ISO 18134-2, Solid biofuels Determination of moisture content Oven dry method Part 2: Total moisture Simplified method E DIN EN ISO 18135, Solid biofuels Sampling DIN ISO 3310-2, Test sieves Technical requirements and testing Part 2: Test sieves of perforated metal plate DIN EN ISO 17831-1:2016-0

12、5 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17831-1 December 2015 ICS 75.160.10; 27.190 Supersedes EN 15210-1:2009English Version Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)Bi

13、ocombustibles solides - Dtermination de la rsistance mcanique des granuls et des briquettes - Partie 1: Granuls (ISO 17831-1:2015) Biogene Festbrennstoffe - Bestimmung der mechanischen Festigkeit von Pellets und Briketts -Teil 1: Pellets (ISO 17831-1:2015) This European Standard was approved by CEN

14、on 17 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

15、may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

16、d to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

17、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managem

18、ent Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17831-1:2015 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 64 Principle 65 App

19、aratus . 66 Sample preparation . 87 Procedure. 87.1 Tumbling procedure . 87.2 Sieving procedure . 88 Calculation of the mechanical durability 99 Performance characteristics 99.1 General . 99.2 Repeatability . 99.3 Reproducibility . 910 Test report . 9Annex A (informative) Example of pellets tester w

20、ith two boxes 11Bibliography . 12Contents PageDIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)2Foreword 4European foreword This document (EN ISO 17831-1:2015) has been prepared by Technical Committee ISO/TC 238 “Solid biofuels“ in collaboration with Technical Committee CEN/TC 335 “Solid biofuels”

21、the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is d

22、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15210-1:2009. This document has been prepared under a mandate given to C

23、EN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

24、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement noti

25、ce The text of ISO 17831-1:2015 has been approved by CEN as EN ISO 17831-1:2015 without any modification. DIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). T

26、he work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-go

27、vernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described

28、in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the

29、possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO li

30、st of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well

31、 as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 238, Solid biofuels.ISO 17831 consists of the following parts under the general title S

32、olid Biofuels Determination of mechanical durability of pellets and briquettes: Part 1: Pellets Part 2: BriquettesDIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)4 IntroductionCompressed solid biomass fuel is usually classified either as pellets or briquettes, of which pellets usually have a diame

33、ter below 25 mm while for briquettes the diameter is higher (see ISO 17225-1). To account for the different particle dimensions, it was necessary to define different test apparatuses for determination of durability for pellets and briquettes.DIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)5 1 Scop

34、eThis part of ISO 17831 defines a determination method for testing the mechanical durability of pellets. The mechanical durability is a measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation.2 Normative referencesThe following doc

35、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 14780, Solid biofuels

36、 Sample preparation1)ISO 16559, Solid biofuels Terminology, definitions and descriptionsISO 18134-1, Solid biofuels Determination of moisture content Oven dry method Part 1: Total moisture Reference methodISO 18134-2, Solid biofuels Determination of moisture content Oven dry method Part 2: Total moi

37、sture Simplified methodISO 18135, Solid Biofuels Sampling1)3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 16559 apply.4 PrincipleA test portion is subjected to controlled shocks by collision of pellets against each other and against the walls of a sp

38、ecified rotating test chamber. The durability is calculated from the mass of test portion, after separation by sieving of particles less than 3,15 mm, and the mass of the test portion after tumbling.5 Apparatus5.1 Pellets testerThe structure and dimensions of the pellet tester are shown in Figure 1

39、see also Annex A).1) In preparation.DIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)6 Dimensions in millimetresKey1 filling door2 drive shaft3 baffleFigure 1 Structure of the main parts of the pellet testerThe pellets tester shall consist of a dust tight box with an internal baffle for mixing of

40、the pellets and a driving mechanism.The box shall have an internal smooth surface and projections such as rivets and screws shall be kept to a minimum and well rounded (alternatively flathead screws can be used). A door can be placed at any side.Specification of box and inner dimensions:Material: st

41、ainless steel (1,5 0,1) mm thickWidth (300 3) mmHeight (300 3) mmBreadth (125 1,3) mmSpecification of baffle and dimensions:Material: stainless steel (1,5 0,1) mm thickLength: (230 2,3) mmWidth: (50 1,0) mmThe baffle is affixed on a diagonal of one of the 300 mm 300 mm side of the box. The baffle ex

42、tends (50 1,0) mm into the box (see Figure 1) and is securely fastened to the back of the box. The edges of the baffle shall not be sharp but rounded to avoid any cutting effect.DIN EN ISO 17831-1:2016-05 EN ISO 17831-1:2015 (E)7 The box shall be capable of rotating at a constant speed of (50 2) r/m

43、in by means of an electric motor with suitable pulleys or gear in order to avoid vibrations. A rotation counter shall be connected to the drum.The rotation counter can also be connected to the motor for automatic shut-off after a defined number of rotations.5.2 SieveThe sieve shall have a screen wit

44、h 3,15 mm diameter round holes and suitable for manual screening (see ISO 3310-2). The recommended diameter of sieve is 400 mm or above.5.3 BalanceThe balance shall be capable of reading to the nearest 0,1 g and a weighing capacity of 2 kg.6 Sample preparationA laboratory sample of minimum 2 kg mate

45、rial for the determination of mechanical durability shall be obtained in accordance with ISO 18135 and prepared in accordance with ISO 14780. The test sample shall be divided into four equal test samples.One test sample shall be used for determination of the total moisture content in accordance with

46、 ISO 18134-1 or ISO 18134-2.Simultaneously for the determination of the durability each of the remaining three test samples shall be sieved separately in order to remove the fines (particles less than 3,15 mm) using a sieve as described in 5.2.The sieving shall be performed by manually shaking each

47、of the test portions in about 5-10 circular movements. The recommended amount of material in the sieve shall be less than 0,8 g/cm2of sieve area. This requirement will be achieved for example by using a sample of 1,0 kg on a sieve 400 mm diameter. If a sieve with a different diameter is used, the am

48、ount of the material shall be adjusted to achieve the same degree of filling.The three test samples may be unified and divided into two portions in preparation for the tumbling (7.1).7 Procedure7.1 Tumbling procedureSelect one of the test portion of (500 10) g from the unified sample (see Clause 6). For pelle