1、May 2010 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 35
2、.240.70!$b;“1636124www.din.deDDIN EN ISO 19115-2Geographic information Metadata Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009)English translation of DIN EN ISO 19115-2:2010-05Geoinformation Metadaten Teil 2: Erweiterungen fr Bild- und Rasterdaten (ISO 19115-2:2009)Englische berse
3、tzung von DIN EN ISO 19115-2:2010-05Information gographique Mtadonnes Partie 2: Extensions pour les images et les matrices (ISO 19115-2:2009)Traduction anglaise de DIN EN ISO 19115-2:2010-05www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprise
4、s 49 pages05.10 DIN EN ISO 19115-2:2010-05 2 A comma is used as the decimal marker. National foreword This document has been prepared by Technical Committee ISO/TC 211 “Geographic information/Geomatics” and has been adopted as EN ISO 19115-2:2010 by Technical Committee CEN/TC 287 “Geographic informa
5、tion” (Secretariat: NEN, Netherlands). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-03-03 AA Kartographie und Geo-information. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
6、EN ISO 19115-2 January 2010 ICS 35.240.70 English Version Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009) Information gographique - Mtadonnes - Partie 2: Extensions pour les images et les matrices (ISO 19115-2:2009) Geoinformation - Metadaten -
7、Teil 2: Erweiterungen fr Bild- und Rasterdaten (ISO 19115-2:2009) This European Standard was approved by CEN on 12 December 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa
8、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l
9、anguage made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es
10、tonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EU
11、ROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19115-2:2010: EContents DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) 2 Page Foreword .
12、3 Introduction.4 1 Scope5 2 Conformance .5 2.1 Conformance requirements .5 2.2 Metadata profiles.5 3 Normative references5 4 Terms and definitions .6 5 Symbols and abbreviated terms9 5.1 Abbreviations.9 5.2 UML notations9 5.3 UML model relationships10 5.4 UML model stereotypes11 6 Imagery and gridde
13、d data metadata12 6.1 Metadata for geospatial imagery and gridded data requirement .12 6.2 Imagery and gridded data metadata packages 12 6.3 Unified Modeling Language (UML) diagrams .16 6.4 Data dictionary.16 Annex A (normative) Imagery and gridded data metadata schemas 17 Annex B (normative) Imager
14、y and gridded data metadata data dictionary26 Annex C (normative) Conformance 44 Bibliography47 Foreword DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) The text of ISO 19115-2:2009 has been prepared by Technical Committee ISO/TC 211 “Geographic information/Geomatics” of the International Organiz
15、ation for Standardization (ISO) and has been taken over as EN ISO 19115-2:2010 by Technical Committee CEN/TC 287 “Geographic Information” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by
16、 endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident
17、ifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
18、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 19115-2:2009 has been approved by CEN as a EN ISO 19115-2:201
19、0 without any modification. 3 Introduction Imagery and gridded data are important information sources and products used within a geospatial environment by geographic information systems. The production of imagery and gridded data follows one or more process chains that begin with remote sensing data
20、, scanned maps, field data collection or other sensing methods and end with the creation of the end data products. The production process needs to be documented in order to maintain quality control over the end products. In addition, metadata about the geometry of the measuring process and the prope
21、rties of the measuring equipment need to be retained with the raw data in order to support the production process. Within the suite of ISO geographic information standards, ISO 19115 defines the guidelines for describing geographic information and services. While the ISO 19115 metadata model does pr
22、ovide some provisions for imagery and gridded data, the requirements were not fully developed at the time ISO 19115:2003 was drafted. To permit the development of ISO 19115 to proceed, inclusion of metadata definitions for imagery and gridded data was deferred until the framework for these data was
23、more fully specified within the suite of ISO geographic information standards. Additionally, other standards that implement metadata for imagery and gridded data have been surveyed and are described in ISO/TR 19121. The object of this part of ISO 19115 is to provide the additional structure to more
24、extensively describe the derivation of geographic imagery and gridded data. This structure is intended to augment ISO 19115. DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) 4 1 Scope This part of ISO 19115 extends the existing geographic metadata standard by defining the schema required for descr
25、ibing imagery and gridded data. It provides information about the properties of the measuring equipment used to acquire the data, the geometry of the measuring process employed by the equipment, and the production process used to digitize the raw data. This extension deals with metadata needed to de
26、scribe the derivation of geographic information from raw data, including the properties of the measuring system, and the numerical methods and computational procedures used in the derivation. The metadata required to address coverage data in general is addressed sufficiently in the general part of I
27、SO 19115. 2 Conformance 2.1 Conformance requirements Metadata shall be provided as specified in Clause 6 and Annexes A and B of this part of ISO 19115 and ISO 19115:2003, Clause 6 and Annexes A and B. User-defined metadata extensions to this part of ISO 19115 shall be defined and provided as specifi
28、ed in ISO 19115:2003, Annex C. Any metadata claiming conformance with this part of ISO 19115 shall pass the requirements described in Annex C of this part of ISO 19115 and the abstract test suite presented in ISO 19115:2003, Annex D. 2.2 Metadata profiles Any profile conforming to this part of ISO 1
29、9115 shall conform to the rules for creating a profile given in ISO 19115:2003, C.6. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of t
30、he referenced document (including any amendments) applies. ISO/TS 19103:2005, Geographic information Conceptual schema language ISO 19107:2003, Geographic information Spatial schema ISO 19115:2003, Geographic information Metadata ISO/TS 19139:2007, Geographic information Metadata XML schema implemen
31、tation DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) 5 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 19115:2003 and the following apply. 4.1 attribute named property of an entity ISO/IEC 2382-17:1999 NOTE Describes a geometrical, topological,
32、thematic, or other characteristic of an entity. 4.2 band range of wavelengths of electromagnetic radiation that produce a single response by a sensing device ISO/TS 19101-2:2008 4.3 class description of a set of objects that share the same attributes, operations, methods, relationships, and semantic
33、s ISO/TS 19103:2005 4.4 coverage feature that acts as a function to return values from its range for any direct position within its spatial, temporal or spatiotemporal domain ISO 19123:2005 EXAMPLE Examples include a raster image, polygon overlay, or digital elevation matrix 4.5 data reinterpretable
34、 representation of information in a formalised manner suitable for communication, interpretation, or processing ISO/IEC 2382-1:1993 4.6 data type specification of a value domain with operations allowed on values in this domain ISO/TS 19103:2005 4.7 dataset identifiable collection of data ISO 19115:2
35、003 4.8 dataset series collection of datasets sharing the same product specification ISO 19115:2003 4.9 domain well-defined set ISO/TS 19103:2005 DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) 6 4.10 event action which occurs at an instant ISO 19108:2002 4.11 geolocation information information
36、used to determine geographic location corresponding to image location 4.12 georectified corrected for positional displacement with respect to the surface of the earth 4.13 georeferencing process of determining the relation between the position of data in the image coordinates and its geographic or m
37、ap location 4.14 grid network composed of two or more sets of curves in which the members of each set intersect the members of the other sets in an algorithmic way ISO 19123:2005 NOTE The curves partition a space into grid cells. 4.15 grid coordinate system coordinate system in which a position is s
38、pecified relative to the intersection of curves 4.16 grid coordinates sequence of two or more numbers specifying a position with respect to its location on a grid 4.17 gridded data data whose attribute values are associated with positions on a grid coordinate system 4.18 ground control point point o
39、n the earth that has an accurately known geographic position 4.19 image gridded coverage whose attribute values are a numerical representation of a physical parameter NOTE The physical parameters are the result of measurement by a sensor or a prediction from a model. 4.20 imagery representation of p
40、henomena as images produced by electronic and/or optical techniques ISO 19101-2:2008 NOTE In this part of ISO 19115, it is assumed that the objects and phenomena have been sensed or detected by camera, infrared and multispectral scanners, radar and photometers, or similar devices. DIN EN ISO 19115-2
41、:2010-05 EN ISO 19115-2:2010 (E) 7 4.21 metadata data about data ISO 19115:2003 4.22 pass single instance of a remote, mobile measuring system going by a target of interest NOTE In this part of ISO 19115, the measuring system will usually be a remote sensing platform. In a navigation context, the me
42、asuring system might be a GPS satellite. 4.23 pixel smallest element of a digital image to which attributes are assigned ISO/TS 19101-2:2008 NOTE It is the smallest unit of display for a visible image. 4.24 platform structure which supports a sensor, or sensors 4.25 polarization restricting radiatio
43、n, especially light, vibrations to a single plane 4.26 remote sensing collection and interpretation of information about an object without being in physical contact with the object 4.27 resolution (of a sensor) smallest difference between indications of a sensor that can be meaningfully distinguishe
44、d NOTE For imagery, resolution refers to radiometric, spectral, spatial and temporal resolutions. ISO/TS 19101-2:2008 4.28 sensor element of a measuring system that is directly affected by a phenomenon, body, or substance carrying a quantity to be measured ISO/IEC GUIDE 99:2007) 4.29 sensor model de
45、scription of the radiometric and geometric characteristics of a sensor ISO19101-2:2008 4.30 spectral resolution specific wavelength interval within the electromagnetic spectrum EXAMPLE Band 1 of Landsat TM lies between 0,45 and 0,52 m in the visible part of the spectrum. 4.31 value element of a type
46、 domain DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2010 (E) 8 ISO/TS 19103:2005 4.32 value domain set of accepted values ISO/TS 19103:2005 EXAMPLE The range 3-28, all integers, any ASCII character, enumeration of all accepted values (green, blue, white). 5 Symbols and abbreviated terms 5.1 Abbreviati
47、ons IDL Interface Definition Language OCL Object Constraint Language UML Unified Modeling Language 5.2 UML notations The diagrams that appear in this part of ISO 19115 are presented using the Unified Modelling Language (UML) static structure diagram with the ISO Interface Definition Language (IDL) b
48、asic type definitions and the UML Object Constraint Language (OCL) as the conceptual schema language. The UML notations used in this part of ISO 19115 are described in Figure 1. AssociationAggregationCompositionGeneralizationDependencyFigure 1 UML notation DIN EN ISO 19115-2:2010-05 EN ISO 19115-2:2
49、010 (E) 9 5.3 UML model relationships 5.3.1 Associations An association is used to describe a relationship between two or more classes. UML defines three different types of relationships, called association, aggregation and composition. The three types have different semantics. An ordinary association shall be used to represent a general relationship between two classes. The aggregation and composition associations shall be used to create part-whole relationships between two classes. The direction of an association
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1