1、November 2016 English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.040.20!%pq“2587778www.din.deD
2、IN EN ISO 4796-1Laboratory glassware Bottles Part 1: Screwneck bottles (ISO 47961:2016);English version EN ISO 47961:2016,English translation of DIN EN ISO 4796-1:2016-11Laborgerte aus Glas Flaschen Teil 1: Flaschen mit Gewindehals (ISO 47961:2016);Englische Fassung EN ISO 47961:2016,Englische berse
3、tzung von DIN EN ISO 4796-1:2016-11Verrerie de laboratoire Flacons Partie 1: Flacons col vis (ISO 47961:2016);Version anglaise EN ISO 47961:2016,Traduction anglaise de DIN EN ISO 4796-1:2016-11SupersedesDIN EN ISO 47961:200107www.beuth.deDocument comprises sr pagesDTranslation by DIN-Sprachendienst.
4、In case of doubt, the German-language original shall be considered authoritative.11.16DIN EN ISO 4796-1:2016-11 2 A comma is used as the decimal marker. National foreword This document (EN ISO 4796-1:2016) has been prepared by Technical Committee ISO/TC 48 “Laboratory equipment” in collaboration wit
5、h Technical Committee CEN/TC 332 “Laboratory equipment” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Laborgerte und Laboreinrichtungen (DIN Standards Committee Laboratory Devices and Installations), Working Committee NA 055-01-03 AA Gla
6、sgerte und Apparate. The DIN Standard corresponding to the International Standard referred to in Clause 2 of this standard is as follows: ISO 3585 DIN ISO 3585 DIN EN ISO 4796 consists of the following parts, under the general title Laboratory glassware Bottles: Part 1: Screw-neck bottles Part 2: Co
7、nical neck bottles Part 3: Aspirator bottles Amendments This standard differs from DIN EN ISO 4796-1:2001-07 as follows: a) screw-neck bottles with nominal capacities of 150 ml, 750 ml and 3 500 ml have been included. Previous editions DIN EN ISO 4796-1: 2001-07 National Annex NA (informative) Bibli
8、ography DIN ISO 3585, Borosilicate glass 3.3 Properties EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4796-1 February 2016 ICS 71.040.20 Supersedes EN ISO 4796-1:2000English Version Laboratory glassware Bottles Part 1: Screw-neck bottles (ISO 4796-1:2016) Verrerie de laboratoire Flacons P
9、artie 1: Flacons col vis (ISO 4796-1:2016) Laborgerte aus Glas Flaschen Teil 1: Flaschen mit Gewindehals (ISO 4796-1:2016) This European Standard was approved by CEN on 13 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi
10、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offi
11、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of
12、 Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
13、Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for
14、 CEN national Members. Ref. No. EN ISO 4796-1:2016 EEN ISO 4796-1:2016 (E) 2 Contents Page European foreword . 3 Foreword 4 1 Scope 5 2 Normative references 5 3 Capacities . 5 4 Dimensions 5 5 Construction 7 5.1 Material . 7 5.2 Design 7 5.3 Closures 8 6 Designation 8 7 Marking . 8 DIN EN ISO 4796-1
15、:2016-11 EN ISO 4796-1:2016 (E) 3 European foreword This document (EN ISO 4796-1:2016) has been prepared by Technical Committee ISO/TC 48 “Laboratory equipment” in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the secretariat of which is held by DIN. This European Standard
16、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall be withdrawn at the latest by August 2016. Attention is drawn to the possibility that some of the elements of this d
17、ocument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 4796-1:2000. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries
18、 are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
19、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 4796-1:2016 has been approved by CEN as EN ISO 4796-1:2016 without any modification. DIN EN ISO 4796-1:2016-11 ForewordISO (the International Organization for Standar
20、dization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to
21、 be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used
22、 to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of
23、 the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified
24、during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the
25、meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.The committee responsible for this document is ISO/TC
26、 48, Laboratory equipment.This second edition cancels and replaces the first edition (ISO 4796-1:2000), which has been technically revised to include screw-neck bottles with nominal capacities of 150 ml, 750 ml, and 3 500 ml.ISO 4796 consists of the following parts, under the general title Laborator
27、y glassware Bottles: Part 1: Screw-neck bottles Part 2: Conical neck bottles Part 3: Aspirator bottlesDIN EN ISO 4796-1:2016-11 EN ISO 4796-1:2016 (E) 41 ScopeThis part of ISO 4796 specifies a series of screw-neck bottles suitable for the storage of fluid liquid and solid chemicals and reagents in g
28、eneral laboratory use. These bottles with nominal volumes ranging from 25 ml to 20 000 ml are also suitable for the preparation and storage of microbiological growth media.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispen
29、sable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3585, Borosilicate glass 3.3 Properties3 Capacities3.1 The nominal capacities of screw-neck bottles shall be c
30、hosen from the following series: 25 ml 50 ml 100 ml 150 ml 250 ml 500 ml and 750 ml; 1 l 2 l 3,5 l 5 l 10 l 15 l and 20 l.3.2 The nominal capacity of a bottle indicates the quantity of liquid which a bottle of average wall thickness shall contain when the bottle is filled to the turn of the shoulder
31、.3.3 The design of the bottle shall be such that the total capacity to the base of the neck shall be approximately 15 % greater than that to the shoulder.4 DimensionsThe dimensions and tolerances of screw-neck bottles are given in Figure 1, Figure 2, and Table 1.Table 1 DimensionsNominal capacityTot
32、al height h1Height to shoulder h2Outside diameter d1Wall thickness sInternal neck diameter d2ml mm approx.mm approx.mm approx.mm min.mm min.25 70 41 36 1,0 12,550 87 50 46 1,0 15100 100 60 56 1,5 27150 110 70 62 1,5 27DIN EN ISO 4796-1:2016-11 EN ISO 4796-1:2016 (E) 5 Nominal capacityTotal height h1
33、Height to shoulder h2Outside diameter d1Wall thickness sInternal neck diameter d2ml mm approx.mm approx.mm approx.mm min.mm min.250 138 90 70 1,5 27500 176 110 86 1,5 27750 204 133 95 1,7 271 000 225 153 101 1,7 272 000 260 170 136 2,0 273 500 295 184 161 2,0 275 000 330 208 181 2,0 2710 000 410 265
34、 227 2,7 2715 000 445 285 268 2,7 2720 000 505 330 288 3,0 27hhssg351dg351dFigure 1 Bottles with nominal capacities of 25 ml to 2 000 mlTable 1 (continued)DIN EN ISO 4796-1:2016-11 EN ISO 4796-1:2016 (E) 6hhsg351dg351ds190Key1 taper 1:30Figure 2 Bottles with nominal capacities of 3,5 l to 20 l5 Cons
35、truction5.1 Material5.1.1 Bottles shall be constructed of clear, colourless or amber borosilicate glass 3.3 in accordance with ISO 3585.5.1.2 Internal stress and visible defects in the glass (such as bubbles near the surface) shall be reduced to a level sufficient to minimize the possibility of frac
36、ture due to thermal or mechanical shock.5.2 Design5.2.1 The base of the bottle shall be constructed so as to enable the bottle to stand firmly on a flat surface without rocking or spinning.5.2.2 The base of the bottle shall have a suitable radius so as to provide a smooth transition between the base
37、 and the side. The main portion of the side shall be cylindrical for bottles with nominal capacities of 25 ml to 2 000 ml, and slightly tapered for bottles with nominal capacities 3,5 l to 20 l with the smaller diameter at the base of the bottle.The diameters d1shall be as given in Table 1.5.2.3 The
38、 shoulder of the bottle shall have a suitable radius in order to provide a smooth transition between the side and the conical upper proportion of the bottle.DIN EN ISO 4796-1:2016-11 EN ISO 4796-1:2016 (E) 7 5.2.4 The upper portion of the shoulder shall be of conical shape. The transition radius fro
39、m the shoulder to the neck shall be as small as possible to be compatible with manufacturing practice.5.2.5 The bottle shall be blown so as to evenly distribute the glass in the mould avoiding sudden changes in the wall thickness. The thinnest areas shall not have a thickness less than the minimum v
40、alue specified in Table 1.5.2.6 The neck of the bottle shall be stoutly constructed and finished with a strengthening lip designed to facilitate pouring without liquid running down the outside of the bottle. A clip-on anti-trip ring of plastics material fitting into a slightly recessed channel on th
41、e outside of the neck is a permitted alternative form of construction.NOTE There are suitable national standards for the dimensions and design of the thread of the screw neck.5.2.7 The outer glass surface of the bottles may be coated with a suitable plastics material as a protection and to limit lea
42、kage of liquid if the bottle is damaged. The coating shall be resistant to steam sterilization at 135 C.5.3 ClosuresBottles shall be provided with closures of a suitable inert plastics material, e.g. polypropylene. Closures shall form a liquid-tight seal with the threaded bottle neck.6 DesignationIf
43、 a designation of bottles is required, this shall be by reference to this part of ISO 4796, i.e. ISO 4796-1, together with the nominal capacity of the bottle.EXAMPLE For a bottle with a nominal capacity of 500 ml, the designation would be as follows:Laboratory bottle ISO 4796-1 5007 Marking7.1 Bottl
44、es complying with this part of ISO 4796 shall be marked with the following:a) nominal capacity;b) makers and/or vendors name and/or trade mark;c) number of this International Standard, i.e. ISO 4796-1, or appropriate reference to the correspondending national standard.In addition, each bottle can be
45、ar an area with a surface suitable for marking with a pencil.Marks a) to c) may be moulded into the recessed base of the bottle, if the method of manufacture permits; otherwise, they may be indelibly marked, in any convenient position, by etching, sandblasting or with vitreous enamel.7.2 The closure
46、s of the bottles shall be marked with the maximum permitted temperature for use or for sterilization, e.g. “max. 100 C”.NOTE Closures not marked with a temperature can only be used at ambient temperature.During sterilization, the closure may not be screwed more than one turn to enable pressure release. Otherwise, pressure increase in the bottle can result in fracture.DIN EN ISO 4796-1:2016-11 EN ISO 4796-1:2016 (E) 8
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1