DIN EN ISO 4797-2016 Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797 2015) German version EN ISO 4797 2015《实验室玻璃器皿 锥形磨接口烧瓶(ISO 4797-2015) 德文版本EN ISO 4797.pdf

1、May 2016 English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.040.20!%SM1“2484214www.din.deDIN E

2、N ISO 4797Laboratory glassware Boiling flasks with conical ground joints (ISO 4797:2015);English version EN ISO 4797:2015,English translation of DIN EN ISO 4797:2016-05Laborgerte aus Glas Erlenmeyer-, Rund- und Stehkolben mit Kegelschliff (ISO 4797:2015);Englische Fassung EN ISO 4797:2015,Englische

3、bersetzung von DIN EN ISO 4797:2016-05Verrerie de laboratoire Fioles coniques et ballons joint conique rod (ISO 4797:2015);Version anglaise EN ISO 4797:2015,Traduction anglaise de DIN EN ISO 4797:2016-05SupersedesDIN EN ISO 4797:2005-03www.beuth.deDocument comprises 11 pagesDTranslation by DIN-Sprac

4、hendienst.In case of doubt, the German-language original shall be considered authoritative.04.16 DIN EN ISO 4797:2016-05 2 A comma is used as the decimal marker. National foreword This document (EN ISO 4797:2015) has been prepared by Technical Committee ISO/TC 48 “Laboratory equipment” in collaborat

5、ion with Technical Committee CEN/TC 332 “Laboratory equipment”. Both secretariats are held by DIN, Germany. The responsible German body involved in its preparation was DIN-Normenausschuss Laborgerte und Laboreinrichtungen (DIN Standards Committee Laboratory Devices and Installations), Working Commit

6、tee NA 055-01-03 AA Glasgerte und Apparate. Boiling flasks of Series 1 (see Tables 1, 2 and 3) are mainly used on the European and Asian markets and comply with previous DIN Standards. Boiling flasks of Series 2 are commonly used on the Anglo-Saxon markets. The DIN Standards corresponding to the Int

7、ernational Standards referred to in this document are as follows: ISO 383 DIN 12242-1 ISO 718 DIN ISO 718 ISO 1773 DIN ISO 1773 ISO 3585 DIN ISO 3585 Amendments This standard differs from DIN EN ISO 4797:2005-03 as follows: a) round-bottom flasks with nominal volumes of 3 l, 5 l and 20 l have been a

8、dded; b) the overall height of some round-bottom flasks of Series 1 (Table 3) has been modified; c) requirements for thermal shock endurances have been specified. Previous editions DIN DENOG 4: 1927-07 DIN DENOG 5: 1927-07 DIN DENOG 6: 1927-07, 1930-09 DIN DENOG 9: 1927-07 DIN DENOG 10: 1927-07 DIN

9、DENOG 11: 1927-07 DIN DENOG 12: 1927-07 DIN 12346: 1943-10, 1944-12 DIN 12348: 1968-03, 1972-06 DIN 12352: 1943-10, 1946-07 DIN 12356: 1943-10, 1944-12 DIN 12371: 1943-10, 1944-12 DIN 12376: 1943-10, 1946-07 DIN 12381: 1943-10, 1946-07 DIN 12386: 1943-10, 1946-07 DIN 12387: 1972-10 DIN EN ISO 4797:

10、2005-03 DIN EN ISO 4797:2016-05 3 National Annex NA (informative) Bibliography DIN 12242-1, Laboratory glassware Interchangeable conical ground joints Dimensions, tolerances DIN ISO 718, Laboratory glassware Thermal shock and thermal shock endurance Test methods DIN ISO 1773, Laboratory glassware Na

11、rrow-necked boiling flasks DIN ISO 3585, Borosilicate glass 3.3 Properties DIN EN ISO 4797:2016-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4797 December 2015 ICS 71.040.20 Supersedes EN ISO 4797:2004English Version Laboratory glassware - Boiling fl

12、asks with conical ground joints (ISO 4797:2015) Verrerie de laboratoire - Fioles coniques et ballons joint conique rod (ISO 4797:2015) Laborgerte aus Glas - Erlenmeyer-, Rund- und Stehkolben mit Kegelschliff (ISO 4797:2015) This European Standard was approved by CEN on 13 December 2015. CEN members

13、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t

14、o the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

15、Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith

16、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-

17、1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 4797:2015 EEuropean foreword .31 Scope . 52 Normative references 53 Types . 54 Series of capacities . 55 Material 56 Dimensions . 57 Ground glass joints . 68 Th

18、ermal shock endurance 69 Marking 6Contents PageDIN EN ISO 4797:2016-05 EN ISO 4797:2015 (E)2Foreword . 4European foreword This document (EN ISO 4797:2015) has been prepared by Technical Committee ISO/TC 48 “Laboratory equipment“ in collaboration with Technical Committee CEN/TC 332 “Laboratory equipm

19、ent” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention

20、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 4797:2004. According to the CEN-CENELEC Internal Regulations, t

21、he national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

22、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 4797:2015 has been approved by CEN as EN ISO 4797:2015 without any modification. DIN EN ISO 4797:2016-05

23、 EN ISO 4797:2015 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a

24、 subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commissio

25、n (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should

26、 be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for ident

27、ifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenie

28、nce of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - S

29、upplementary information.The committee responsible for this document is ISO/TC 48, Laboratory equipment in collaboration with CEN/TC 332, Laboratory equipment.This third edition cancels and replaces the second edition (ISO 4797:2004), which has been technically revised to include the following chang

30、es: round-bottom flasks with nominal volumes of 3 l, 5 l, and 20 l have been added; overall heights of some round-bottom flasks of Series 1 (Table 3) have been modified; requirements for thermal shock endurance have been added.DIN EN ISO 4797:2016-05 EN ISO 4797:2015 (E)4 1 ScopeThis International S

31、tandard specifies requirements for an internationally acceptable series of boiling flasks with conical ground joints for general laboratory purposes.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicati

32、on. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 383, Laboratory glassware Interchangeable conical ground jointsISO 718, Laboratory glassware Thermal shock and thermal shock enduranc

33、e Test methodsISO 1773, Laboratory glassware Narrow-necked boiling flasksISO 3585, Borosilicate glass 3.3 Properties3 TypesThe following three types of boiling flasks with conical ground joints are specified:a) conical flasks;b) flat-bottom flasks;c) round-bottom flasks.4 Series of capacitiesTwo ser

34、ies are specified for each type of boiling flask with conical ground joints. The series differ in height and in selection of joint sizes. It is recommended that, in national standards, one of these series is chosen.5 MaterialBoiling flasks shall be made from borosilicate glass 3.3 in accordance with

35、 ISO 3585, and shall be free from visible defects which might affect performance and free from any internal stress which would impair the performance of the flask.6 DimensionsThe external diameter of body of round-bottom flasks and flat-bottom flasks, the external diameter of body at the widest poin

36、t of conical flasks and the minimum wall thickness shall comply with the dimensions specified in ISO 1773.The nominal overall height of the boiling flasks with conical ground joints shall be as specified in Table 1, Table 2 and Table 3.DIN EN ISO 4797:2016-05 EN ISO 4797:2015 (E)5 7 Ground glass joi

37、ntsThe sizes of the conical joints fitted to the boiling flasks shall be as given in Table 1, Table 2 and Table 3. The joints shall comply with the requirements of ISO 383, k6 series.8 Thermal shock enduranceBoiling flasks with a nominal volume 3 000 ml shall have a thermal shock endurance of 150 C

38、and boiling flasks with a nominal volume 3 000 ml shall have a thermal shock endurance of 100 C when tested in accordance with ISO 718.9 MarkingThe following inscriptions shall be permanently and legibly marked on all laboratory boiling flasks with conical ground joints:a) nominal volume of the boil

39、ing flask, for example “100 ml”;b) size of the conical ground joint, for example “29/32”;c) manufacturers and/or vendors name and/or mark;d) area with a surface suitable for marking with a pencil.It is recommended that reference be made on each flask to this International Standard, for example by th

40、e inscription “ISO 4797”.Table 1 Overall height and joint sizes for conical flasksNominal volumemlSeries 1 Series 2Overall height mmJoint sizes Nominal overall height mmJoint sizes10 60 3 14/23 25 70 314/23 19/267014/23 19/2650 85 6 85100100 614/23 19/26 24/29 29/3210514/23 19/26 24/29 29/32250 140

41、619/26 24/29 29/32135 19/26 24/29 29/32 34/35500175 6 1701 000 220 7 24/29 29/32 34/35210 24/29 29/32 34/352 000270 7 2753 000 31034/35 45/405 000 365DIN EN ISO 4797:2016-05 EN ISO 4797:2015 (E)6 Table 2 Overall height and joint sizes for flat-bottom flasksNominal volumemlSeries 1 Series 2Overall he

42、ightmmJoint sizes Nominal overall heightmmJoint sizes50 85 319/26 29/328519/26 24/29100 103 6 100 19/26 24/29 29/32 34/35250 130 6 125500 160 629/3214524/29 29/32 34/351 000 187 6 1752 000 230 6 2104 000 255 45/40Table 3 Overall height and joint sizes for round-bottom flasksNominal volumemlSeries 1

43、Series 2Overall heightmmJoint sizes Nominal overall heightmmJoint sizes10 70 314/23 25 85 350 90 614/23 19/26 24/29 29/3290 14/23 19/26 29/32 24/29 34/35100 105 6 110250 138 619/26 24/29 29/3213519/26 24/29 29/32 34/35500 163 624/29 29/32155 19/26 24/29 29/32 34/35 45/401 000 200 7 1852 000 240 7 2203 000 275 724/29 29/32 34/35 45/40 55/44 4 000 295 729/32 45/4027034/35 45/405 000 300 724/29 29/32 34/35 45/40 55/4427529/32 34/35 45/406 000 358 7 45/40 325 45/4010 000 380 7 45/40 35034/35 45/4020 000 435 10 55/44 DIN EN ISO 4797:2016-05 EN ISO 4797:2015 (E)7