1、July 2015 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71
2、.040.30!%DEnglish version EN ISO 6141:2015,English translation of DIN EN ISO 6141:2015-07Gasanalyse Inhalte von Zertifikaten fr Kalibriergasgemische (ISO 6141:2015);Englische Fassung EN ISO 6141:2015,Englische bersetzung von DIN EN ISO 6141:2015-07Analyse des gaz Contenu des certificats des mlanges
3、de gaz pour talonnage (ISO 6141:2015);Version anglaise EN ISO 6141:2015,Traduction anglaise de DIN EN ISO 6141:2015-07SupersedesDIN EN ISO 6141:2006-11www.beuth.deDocument comprises 12 pagesIn case of doubt, the German-language original shall be considered authoritative.06.15 DIN EN ISO 6141:2015-07
4、 2 A comma is used as the decimal marker. National foreword This document (EN ISO 6141:2015) has been prepared by Technical Committee CEN/TC 158 “Analysis of gases” (Secretariat: NEN, Netherlands) in collaboration with Technical Committee CEN/SS N21 “Gaseous fuels and combustible gas” (Secretariat:
5、CCMC). The responsible German body involved in its preparation was the DIN-Normenausschuss Materialprfung (DIN Standards Committee Materials Testing), Working Committee NA 062-05-73 AA Gasanalyse und Gasbeschaffenheit. The DIN Standards corresponding to the International Standards referred to in thi
6、s document are as follows: ISO 13443 DIN EN ISO 13443 ISO/IEC 17025 DIN EN ISO/IEC 17025 Amendments This standard differs from DIN EN ISO 6141:2006-11 as follows: a) Clause 1 “Scope” has been revised; b) Clause 2 “Normative references” has been added; c) Table 2 “Specification of certificate extract
7、 data” has been deleted; d) Annex A (informative) “Cross-references to ISO Guide 31 and ISO/IEC 17025” has been added. Previous editions DIN 51895: 1987-03 DIN ISO 6141: 2004-05 DIN EN ISO 6141: 2006-11 National Annex NA (informative) Bibliography DIN EN ISO 13443, Natural gas Standard reference con
8、ditions DIN EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6141 March 2015 ICS 71.040.40 Supersedes EN ISO 6141:2006English Version Gas analysis - Contents of certificates for calibration gas
9、mixtures (ISO 6141:2015) Analyse des gaz - Contenu des certificats des mlanges de gaz pour talonnage (ISO 6141:2015) Gasanalyse - Inhalte von Zertifikaten fr Kalibriergasgemische (ISO 6141:2015) This European Standard was approved by CEN on 26 December 2014. CEN members are bound to comply with the
10、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management
11、Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
12、 the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
13、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All r
14、ights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6141:2015 EForeword 31 Scope . 42 Normative references 43 Terms and definitions . 44 Contents . 44.1 Specification of certificate data 44.2 General information . 54.2.1 Title of the docume
15、nt . 54.2.2 Unique certificate identification . 54.2.3 Container identification . 54.2.4 Producer 54.2.5 Customer (optional) 64.2.6 Nominal composition (optional) 64.2.7 Authorization date 64.2.8 Responsible person . 64.2.9 Number of pages and page numbering 64.2.10 Intended use 64.2.11 Safety infor
16、mation 64.3 Gas or gas mixture specification 64.3.1 Specified components . 64.3.2 Composition . 64.3.3 Standard uncertainty . 74.3.4 Expanded uncertainty . 74.3.5 References/metrological traceability 74.3.6 Method of preparation 74.3.7 Filling pressure 74.3.8 Method of analysis 74.3.9 Date of prepar
17、ation 74.3.10 Minimum utilization pressure 74.3.11 Expiry date 84.3.12 Date of analysis (optional) 84.3.13 Commercial name (optional) 84.4 Additional product information . 84.4.1 Container volume 84.4.2 Filling quantity (optional) . 84.4.3 Valve outlet connection 84.4.4 Storage/utilization temperatu
18、re 84.4.5 Indicative values (optional) 8Annex A (informative) Cross-references to ISO Guide 31 and ISO/IEC 17025 9Bibliography . 10Contents PageDIN EN ISO 6141:2015-07 EN ISO 6141:2015 (E) 2 Foreword This document (EN ISO 6141:2015) has been prepared by Technical Committee ISO/TC 158 “Analysis of ga
19、ses”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting national standards shall be withdrawn at the latest by September 2015. Attention is drawn to the possibility t
20、hat some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 6141:2006. According to the CEN-CENELEC Internal Regulations, the national standards organiza
21、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
22、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 6141:2015 has been approved by CEN as EN ISO 6141:2015 without any modification. DIN EN ISO 6141:2015-07 EN ISO 6141:2015 (E) 3 1 Scop
23、eThis International Standard specifies minimum requirements for the contents of certificates for homogeneous gas mixtures in gas cylinders to be used as calibration gas mixtures. Pure gases, when used as calibration gas mixtures, are also covered by this International Standard. Gases and gas mixture
24、s produced for other purposes are not considered.The requirements in this International Standard deal with the metrological aspects of calibration gas mixtures. Other aspects, such as safety and legislative aspects, are not covered.Furthermore, it specifies additional information (optional data) rec
25、ommended for describing a homogeneous gas mixture, supplied under pressure in a cylinder or other container. It does not cover the field of safety-relevant data and related labelling.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and a
26、re indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC Guide 98-3, Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measur
27、ement (GUM:1995)ISO 7504, Gas analysis Vocabulary3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO/IEC Guide 98-3, ISO 7504, and the following apply.3.1producerorganization that has produced the gas or gas mixtureNote 1 to entry: The producer is the org
28、anization which bears the responsibility for the contents of the certificate.3.2customerorganization that has ordered the gas or gas mixture3.3containervessel in which the gas or gas mixture is supplied4 Contents4.1 Specification of certificate dataThe information specified by this International Sta
29、ndard shall be provided by the supplier of the gas or gas mixture, in a certificate, i.e. a document uniquely related to the container and its contents.DIN EN ISO 6141:2015-07 EN ISO 6141:2015 (E) 4 The certificate shall contain as a minimum the data specified as “mandatory” in Table 1. It is recomm
30、ended that the data specified as “optional” are also included in the certificate.Requirements for and explanations of the data to be provided are given in the following clauses.Table 1 Specification of certificate dataMandatory data Reference Optional data ReferenceTitle of the document 4.2.1 Custom
31、er 4.2.5Unique certificate identification 4.2.2 Nominal composition 4.2.6Container identification 4.2.3 Intended use 4.2.10Producer 4.2.4 Safety information 4.2.11Authorization date 4.2.7 Standard uncertainty 4.3.3Responsible person 4.2.8 Method of preparation 4.3.6Number of pages and page num-berin
32、g4.2.9 Method of analysis 4.3.8Specified components 4.3.1 Date of preparation 4.3.9Composition 4.3.2 Date of analysis 4.3.12Expanded uncertainty 4.3.4 Commercial name 4.3.13References/metrological trace-ability4.3.5 Container volume 4.4.1Filling pressure 4.3.7 Filling quantity 4.4.2Minimum utilizati
33、on pressure 4.3.10 Indicative values 4.4.5Expiry date 4.3.11Valve outlet connection 4.4.3Storage/utilization tempera-ture4.4.44.2 General information4.2.1 Title of the documentThe certificate shall have a title that identifies the document as a certificate stating one or more properties of a gas or
34、gas mixture.4.2.2 Unique certificate identificationEach certificate shall be assigned a unique identification.4.2.3 Container identificationContainers for pressurized gases shall be identified by the number that is stamped into the wall or by batch or lot numbers.4.2.4 ProducerProvide the name, addr
35、ess, telephone number and e-mail address of the producer.DIN EN ISO 6141:2015-07 EN ISO 6141:2015 (E) 5 4.2.5 Customer (optional)Provide the name and address of the customer and any other information required by the customer.NOTE ISO/IEC 17025:20052requires mentioning the customer on a certificate.4
36、.2.6 Nominal composition (optional)Provide the composition of the gas or gas mixture requested by the customer.NOTE A quality indication of the gases used in preparation can be appropriate.4.2.7 Authorization dateThe date the certificate was issued shall be stated.4.2.8 Responsible personThe signatu
37、re and name of the person who is responsible for the information in the certificate shall be given.4.2.9 Number of pages and page numberingThe total number of pages of the certificate shall be given. The pages of the document shall be numbered consecutively.4.2.10 Intended useState the application(s
38、) for which the gas or gas mixture can be used.NOTE The specification of these applications is not necessarily exhaustive.EXAMPLE “This gas mixture can be used for calibration of equipment.”4.2.11 Safety informationInformation relevant for the safe handling, transport, and storage should be provided
39、.NOTE This kind of information is usually given by a safety data sheet (SDS). If further information is required, this may be provided on the calibration gas or gas mixture certificate.4.3 Gas or gas mixture specification4.3.1 Specified componentsThe names of the specified components of the gas mixt
40、ure shall be given in an unambiguous way that is understood by the customer. It is recommended to name the components in accordance with IUPAC terminology. For the balance gas, a more common name may be used, such as synthetic air.4.3.2 CompositionThe contents of all specified components of the gas
41、mixture shall be given.NOTE It is preferable to express the contents in amount-of-substance or mass fractions, since these quantities are independent of the pressure and the temperature of the gas mixture. If other quantities are used, e.g. mass concentration or volume fraction, it is necessary to s
42、pecify the conditions (pressure and temperature) for which the stated composition is valid.DIN EN ISO 6141:2015-07 EN ISO 6141:2015 (E) 6 4.3.3 Standard uncertaintyFor every specified component, it shall be possible to deduce the standard uncertainty from the uncertainty information provided.EXAMPLE
43、 The standard uncertainty can be calculated from a stated expanded uncertainty and coverage factor.The standard uncertainty should include the contributions from all relevant uncertainty sources. The uncertainty sources considered in the evaluation may be specified. The supplier should be ready and
44、able to provide additional information on the evaluation of uncertainty at request of the customer.4.3.4 Expanded uncertaintyFor every specified component, the expanded uncertainty of the content shall be stated. The coverage factor used shall be specified. Preferably, the information is supplemente
45、d by the assumed probability distribution and the level of coverage.It is recommended to use a coverage factor of 2.4.3.5 References/metrological traceabilityReferences shall be given, relating the stated contents and uncertainties to International Standard methods.For the components contents specif
46、ied, the metrological traceability information shall be given, including the used measurement standards or certified reference materials.The supplier shall specify to the customer, on request, the relevant metrological traceability chains.4.3.6 Method of preparationSpecify the essential features of
47、the method by which the gas or gas mixture was produced.4.3.7 Filling pressureProvide the filling or supplied pressure of the gas or gas mixture at a specified reference temperature.4.3.8 Method of analysisSpecify the essential features of the method by which the gas or gas mixture was analysed. This can be the analysis technique or method by which the composition was determined or by which the determined composition was validated.4.3.9 Date of pr
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1