DIN EN ISO 6360-5-2008 Dentistry - Number coding system for rotary instruments - Part 5 Specific characteristics of root-canal instruments (ISO 6360-5 2007) English version of DIN .pdf

1、March 2008DEUTSCHE NORM English price group 7No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 11.060.25!$LV%“1415102www

2、.din.deDDIN EN ISO 6360-5Dentistry Number coding system for rotary instruments Part 5: Specific characteristics of root-canal instruments(ISO 6360-5:2007)English version of DIN EN ISO 6360-5:2008-03Zahnheilkunde Nummernsystem fr rotierende Instrumente Teil 5: Besondere Eigenschaften von Wurzelkanali

3、nstrumenten (ISO 6360-5:2007)Englische Fassung DIN EN ISO 6360-5:2008-03Together with DIN EN ISO 6360-2:2005-02, DIN EN ISO 6360-3:2006-03, DIN EN ISO 6360-4:2004-09,DIN EN ISO 6360-6:2004-09 and DIN EN ISO 6360-7:2006-05 supersedes DIN EN 26360-2:1991-12Supersedes: see belowwww.beuth.deDocument com

4、prises 9 pagesDIN EN ISO 6360-5:2008-03 2 National foreword This standard has been prepared by Technical Committee ISO/TC 106 “Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Norme

5、nausschuss Dental (Dentistry Standards Committee), Technical Committee NA 014-00-04 AA Rotierende Instrumente. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO 1942 E DIN EN ISO 1942 ISO 3630-1 DIN EN ISO 3630-1 ISO 6360-1:2004 DIN

6、EN ISO 6360-1:2004-07 ISO 6360-2:2004 DIN EN ISO 6360-2:2005-02 Amendments This standard differs from DIN EN 26360-2:1991-12 as follows: a) The number coding system has been extended to include new shapes and instruments. b) The specific characteristics of root-canal instruments are now dealt with i

7、n a separate part (formerly Part 2). c) The standard has been divided up into a six-part series. Previous editions DIN 13955-2: 1986-12 DIN EN 26360-2: 1991-12 National Annex NA (informative) Bibliography E DIN EN ISO 1942, Dentistry Terminology DIN EN ISO 3630-1, Dentistry Root-canal instruments Pa

8、rt 1: General requirements and test methods DIN EN ISO 6360-1-2004, Dentistry Number coding system for rotary instruments Part 1: General characteristics (ISO 6360-1:2004) DIN EN ISO 6360-2-2004, Dentistry Number coding system for rotary instruments Part 2: Shapes (ISO 6360-2:2004) EUROPEAN STANDARD

9、 NORME EUROPENNE EUROPISCHE NORM EN ISO 6360-5 December 2007 ICS 11.060.25 English Version Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007) Art dentaire - Systme de codification numrique pour instruments rotatifs -

10、 Partie 5: Caractristiques spcifiques des instruments pour canaux radiculaires (ISO 6360-5:2007) Zahnheilkunde - Nummernsystem fr rotierende Instrumente - Teil 5: Besondere Eigenschaften von Wurzelkanalinstrumenten (ISO 6360-5:2007) This European Standard was approved by CEN on 7 November 2007. CEN

11、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

12、cation to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre h

13、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

14、rtugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any m

15、eans reserved worldwide for CEN national Members. Ref. No. EN ISO 6360-5:2007: E2 Foreword This document (EN ISO 6360-5:2007) has been prepared by Technical Committee ISO/TC 106 “Dentistry“ in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN. This

16、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the eleme

17、nts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eur

18、opean Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unite

19、d Kingdom. Endorsement notice The text of ISO 6360-5:2007 has been approved by CEN as a EN ISO 6360-5:2007 without any modification. EN ISO 6360-5:2007 (E) DIN EN ISO 6360-5:2008-03 Introduction This part of ISO 6360 is one of a series of International Standards relating to dental rotary instruments

20、. A wide variety of dental rotary instruments, including root-canal instruments, is manufactured throughout the world for use by the dental profession. ISO 6360 provides a general number coding system for all types of dental rotary instruments, including accessories used in connection with these rot

21、ary instruments. The benefits of this system for dentistry in its entirety will only be derived if the system is widely adopted; manufacturers of dental instruments, as well as the dental trade, are therefore requested to refer to ISO 6360 in their catalogues. This part of ISO 6360 was prepared in r

22、esponse to a need by the dental trade and industry, and the dental profession, for a universal system of classification and designation for these instruments. It establishes a comprehensive number coding system suitable for all dental rotary instruments by use of a 15-digit code number identifying g

23、eneral and specific characteristics of instruments or groups of instruments. The first group of three digits identifies the materials used for the working part of instruments. The second group of three digits identifies the shanks and handles used for instruments and the overall lengths of instrumen

24、ts. The third group of three digits identifies the shapes of instruments. The fourth group of three digits identifies the specific characteristics for groups of instruments. The fifth group of three digits identifies the nominal diameter of the working part of the instruments. The code numbers are g

25、eneric code numbers. They do not provide exact product information. This information is given in the respective product standard for dental rotary instruments. For the application of the system and for the correct allocation of numbers or their identification, it is intended that the user consult IS

26、O 6360-1 and ISO 6360-2 for general information, and in addition one of the following subsequent parts (ISO 6360-3 to ISO 6360-7) for further information on specific characteristics of instruments or groups of instruments. For the allocation of new numbers complying with ISO 6360, an application sup

27、ported by a description and a drawing should be sent to the secretariat of ISO/TC 106/SC 4, Dental instruments, which keeps updated records of all numbers currently allocated. An international group of experts will then decide on an appropriate identification number for the instrument in question, i

28、ncluding its specific characteristics. The Secretary will inform the applicant, in due course, of the result and assist him in using the number correctly. The Secretariat of ISO/TC 106/SC 4 can be contacted at: DIN NADENT Alexander-Wellendorff-Str. 2 D-75172 Pforzheim Germany 3 EN ISO 6360-5:2007 (E

29、) DIN EN ISO 6360-5:2008-03 1 Scope This part of ISO 6360 specifies the code numbers for specific characteristics of root-canal instruments. This three digit number appears in the locations 10 to 12 of the 15-digit overall number and forms the fourth group of three digits in the 15-digit overall num

30、ber, the principles of which are explained in ISO 6360-1 and ISO 6360-2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the reference

31、d document (including any amendments) applies. ISO 1942 (all parts), Dental vocabulary ISO 3630-1, Dentistry Root-canal instruments Part 1: General requirements and test methods ISO 6360-1:2004, Dentistry Number coding system for rotary instruments Part 1: General characteristics ISO 6360-2:2004, De

32、ntistry Number coding system for rotary instruments Part 2: Shapes 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1942 (all parts) and ISO 6360-1 apply. 4 Number coding system for root-canal instruments 4.1 General The number coding system for root-

33、canal instruments consists of a 15-digit overall number. The general characteristics of the number coding system for rotary instruments including root-canal instruments are described in ISO 6360-1. The first and second groups of three digits are specified in ISO 6360-1. The shapes and designs of roo

34、t-canal instruments are described in ISO 6360-2:2004, Table 5, in the code number ranging from 880 to 999. The shapes and their respective numbers are specified in ISO 6360-2 as the third group. 4 EN ISO 6360-5:2007 (E) DIN EN ISO 6360-5:2008-03 The specific characteristics of root-canal instruments

35、 are described in this part of ISO 6360. The nominal sizes of the operative part are described in ISO 3630-1. 4.2 Groups The number coding system for root-canal instruments consists of 15 digits, separated into five groups: 000 000 000 000 000 First group: digits 1 and 2: material of operative part

36、(see ISO 6360-1:2004, Table 1). digit 3: coating of operative part (see ISO 6360-1:2004, Table 2). Second group: digits 4 and 5: type of shank or handle (see ISO 6360-1:2004, Table 4). digit 6: code for overall length (see ISO 6360-1:2004, 5.5 and Table 5). Third group: digit 7, digit 8 and digit 9:

37、 shape of operative part (see ISO 6360-2:2004, Table 5). Fourth group: digit 10 and digit 11: length of operative part (see ISO 3630-1). digit 12: taper of operative part. Fifth group: digit 13, digit 14 and digit 15: nominal size of operative part (see ISO 3630-1). 4.3 Identification 000 00 0 000 0

38、00 000 A B C D E F Key A material of working part (first and second digit; see ISO 6360-1:2004, 5.2 and Table 1); coating of working part (third digit; see ISO 6360-1:2004, 5.3 and Table 2) B type of shank or handle (fourth and fifth digit; see ISO 6360-1:2004, 5.4 and Table 4) C overall length (six

39、th digit; see ISO 6360-1:2004, 5.5 and Table 5) D shape (seventh to ninth digit; see ISO 6360-2:2004, Table 5, numbers 880 to 999) E length of operative part (10th and 11th digit, see ISO 3630-1) and taper of working part (12th digit) F nominal size of working part (13th to 15th digit; see ISO 3630-

40、1) Figure 1 Key to root-canal number code system 5 EN ISO 6360-5:2007 (E) DIN EN ISO 6360-5:2008-03 5 Code numbers for specific characteristics of root-canal instruments 5.1 General The fourth group of three digits refers to the length of the operative part and taper of the working part of root-cana

41、l instruments. The length of the operative part of a root-canal instrument is identified by the tenth and eleventh digits and the taper of the working part is identified by the twelfth digit. 5.2 Length of operative part of root-canal instrument The operative part of root-canal instruments is consid

42、ered as the portion from the tip to the handle or shank of the root-canal instrument. The length of the operative part is given in the locations 10 and 11. The length of the operative part of root-canal instruments is identified in millimetres. 5.3 Taper of working part of root-canal instruments The

43、 taper of the working part of root-canal instruments is given in the location 12. The taper of the working part of root-canal instruments is identified, in percent, as the enlargement of the diameter of the working part, in millimetres per millimetre length of root-canal instrument. The taper is rou

44、nded to the nearest percent. The numbers for the taper range from zero to nine. The numbers 0 up to 8 indicate the taper in percent. The number 9 is used for tapers greater than 8 %. In this case, the taper is indicated by the shape number given in ISO 6360-2:2004, Table 5. EXAMPLE 1 If the taper al

45、ong the working part is 0,02:1, the taper, in percent, is 2 %. The code number for these root-canal instruments is 2. EXAMPLE 2 Taper sizes of 10 % and 12 % are identified in the digits for the shape and design (i.e. digits 7 to 9) by different shape numbers (see ISO 6360-2:2004, Table 5). The code

46、number for these root-canal instruments is 9. EXAMPLE 3 If a root-canal instrument has no taper (i.e. the taper is 0 %), the twelfth digit is 0. The code number for these root-canal instruments is 0. EXAMPLE 4 If a root-canal instrument has an irregular shape (e.g. arc shape), or has more than one t

47、aper, the twelfth digit is 0. The code number for these root-canal instruments is 0. 6 EN ISO 6360-5:2007 (E) DIN EN ISO 6360-5:2008-03 Bibliography 1 ISO 1797-1, Dental rotary instruments Shanks Part 1: Shanks made of metals 2 ISO 1797-2, Dental rotary instruments Shanks Part 2: Shanks made of plastics 7 EN ISO 6360-5:2007 (E) DIN EN ISO 6360-5:2008-03