DIN EN ISO 6433-2012 Technical product documentation Part references (ISO 6433 2012) German version EN ISO 6433 2012《技术产品文件 零件参照(ISO 6433-2012) 德文版本EN ISO 6433-2012》.pdf

1、December 2012 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 01.100.01!$X“1929053www.din.deDDIN EN ISO 6433Technical product documentation Part references (ISO 6433:2012);English version EN ISO 6433:2012,English translation of DIN EN ISO 6433:2012-12Technische Zeichnungen Positionsnummern (ISO 6433:2012);Englische Fassung EN ISO 6433:2012,Englische bersetzu

3、ng von DIN EN ISO 6433:2012-12Documentation technique de produits Rfrences de pice (ISO 6433:2012);Version anglaise EN ISO 6433:2012,Traduction anglaise de DIN EN ISO 6433:2012-12SupersedesDIN ISO 6433:1982-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be

4、 considered authoritative.1011.12 DIN EN ISO 6433:2012-12 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 10 “Technical product documentation” in collaboration with Technical Committee CEN/SS F01 “Technical drawings” (Secretari

5、at: SIS, Sweden). The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen (Fundamental Technical Standards Committee), Working Committee NA 152-06-05 AA Technische Zeich-nungen. The DIN Standards corresponding to the International Standards referred to i

6、n this document are as follows: ISO 128-22 DIN ISO 128-22 ISO 128-23 DIN ISO 128-23 ISO 128-24 DIN ISO 128-24 ISO 128-25 DIN ISO 128-25 ISO 3098-0 DIN EN ISO 3098-0 Amendments This standard differs from DIN ISO 6433:1982-09 as follows: a) the standard has been adopted as a European Standard; b) norm

7、ative references have been completely revised; c) Subclause 4.1 “Identifiers” has been supplemented; d) the standard has been editorially revised. Previous editions DIN 36: 1922-10 DIN 6: 1922-11x, 1956-10, 1968-03 DIN ISO 6433: 1982-09 National Annex NA (informative) Bibliography DIN ISO 128-22, Te

8、chnical drawings General principles of presentation Part 22: Basic conventions and applications for leader lines and reference lines DIN ISO 128-23, Technical drawings General principles of presentation Part 23: Lines on construction DIN ISO 128-24, Technical drawings General principles of presentat

9、ion Part 24: Lines on mechanical engineering drawings DIN ISO 128-25, Technical drawings General principles of presentation Part 25: Lines on shipbuilding drawings DIN EN ISO 3098-0, Technical product documentation Lettering Part 0: General requirements EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE N

10、ORM EN ISO 6433 May 2012 ICS 01.110 Supersedes EN ISO 6433:1994English Version Technical product documentation - Part references Documentation technique de produits - Rfrences de pice (ISO 6433:2012) Technische Zeichnungen - Positionsnummern This European Standard was approved by CEN on 10 May 2012.

11、 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

12、application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELE

13、C Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

14、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of

15、exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6433:2012: E(ISO 6433:2012) (ISO 6433:2012) Contents DIN EN ISO 6433:2012-12 EN ISO 6433:2012 (E) 2 Page Foreword 3 1 Scope 4 2 Normative references 4 3 General requirements 4 4 Presentation .4 4.1

16、 Identifiers 4 4.2 Appearance 5 4.3 Identical parts .5 4.4 Location 5 4.5 Positioning .6 4.6 Related parts 6 4.7 Numbering sequence 6 5 Example 6 Annex A (normative) Part references shown with number of parts 8 Foreword This document (EN ISO 6433:2012) has been prepared by Technical Committee ISO/TC

17、 10 “Technical product documentation in collaboration with CCMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest

18、by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 6433:1994. According to the CEN/CENE

19、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

20、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 6433:2012 has been approved by CEN as a EN ISO 6433:2012 without any modification. DIN EN ISO 6433:2012-12 EN ISO 64

21、33:2012 (E) ” “3 1 ScopeThis International Standard gives rules for the presentation of part references in assembly representations, e.g. on assembly drawings, in order to identify the constituent parts in a related parts list.2 Normative referencesThe following referenced documents are indispensabl

22、e for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 128-22:1999, Technical drawings General principles of presentation Part 22: Basic conventions and

23、 applications for leader lines and reference linesISO 128-23:1999, Technical drawings General principles of presentation Part 23: Lines on construction drawingsISO 128-24:1999, Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawingsISO 128-25:1999, Tec

24、hnical drawings General principles of presentation Part 25: Lines on shipbuilding drawingsISO 129-1:2004, Technical drawings Indication of dimensions and tolerances Part 1: General principlesISO 3098-0:1997, Technical product documentation Lettering Part 0: General requirementsISO 7573:2008, Technic

25、al product documentation Parts lists3 General requirementsIt is recommended that part references be assigned in sequential order (see 4.7).Identical parts shown in an assembly shall have the same part reference.Each complete sub-assembly incorporated in the superior assembly is identified by a singl

26、e part reference.All part references shall be shown in a parts list (see ISO 7573) giving the appropriate information on the parts concerned.4 Presentation4.1 IdentifiersPreferably part references should consist of numerals only. If necessary, they may be augmented by the use of capital letters. The

27、 design, dimensions and spacing of the characters shall comply with ISO 3098-0.It is recommended that the part reference number contain a maximum of three characters.DIN EN ISO 6433:2012-12 EN ISO 6433:2012 (E) 4 4.2 AppearanceAll part references on the same drawing shall be of the same type and hav

28、e the same height of lettering. They shall be clearly distinguishable from all other indications. This can be achieved for example by:a) encircling the characters of each part reference (see Figure 1); in this case, the circles shall have the same diameter and be drawn with continuous narrow lines (

29、type 01.1 of ISO 128-23, ISO 128-24 and ISO 128-25);Figure 1 Encircled-part reference numberb) using characters of a larger height, for example twice the height as used for dimensioning, and similar indications (see Figures 2 and 3).Figure 2 Part reference number written with larger character height

30、Figure 3 Alternative method of indication4.3 Identical partsPart references of identical parts should only be identified once, provided that there is no risk of ambiguity. For exceptions, see Annex A.4.4 LocationPart references shall be placed outside the outlines of the parts concerned.The part ref

31、erence should be connected to its associated part by a leader line (see Figures 1, 2 and 3), the termination of which shall comply with ISO 128-22.Leader lines shall not intersect. They should be kept as short as practicable and should preferably be drawn at an angle to the part reference. In the ca

32、se of encircled-part references, the leader Iine shall be directed towards the centre of the circle.DIN EN ISO 6433:2012-12 EN ISO 6433:2012 (E) 5 4.5 PositioningFor the sake of clarity and legibility of a drawing, part references should preferably be arranged in horizontal rows and/or vertical colu

33、mns (see Figure 4).When several part references use a common leader line, they may be arranged horizontally according to one of following methods illustrating four part references (8, 9, 10 and 11).NOTE Method a) can also be arranged vertically.Methods:a)b)4.6 Related partsPart references of related

34、 parts, e.g. screw, washer and nut, may be identified by a common leader Iine (see Figure 4, parts 2, 3 and 4).4.7 Numbering sequenceA distinct sequence for numbering should be adopted: according to the possible order of assembly; according to the importance of the component parts (sub-assemblies, m

35、ajor parts, minor parts, etc.); according to any other logical sequence.5 ExampleAn example of the application of part references for an assembly is given in Figure 4.DIN EN ISO 6433:2012-12 EN ISO 6433:2012 (E) 6 Figure 4 Use of part references on an assembly drawingDIN EN ISO 6433:2012-12 EN ISO 6

36、433:2012 (E) 7 Annex A (normative) Part references shown with number of partsThe number of parts is specified in the parts list and should be avoided in connection to the part reference number on the drawing.For clarity, the same part reference number may need to be repeated at different locations.

37、The number of parts at each location may also be needed. The part reference number shall then be encircled according to method a) in 4.2 and the indication of number of parts should follow general drawing rules. The number of parts shall be indicated along with the symbol “” in accordance with ISO 1

38、29-1. See Figure A.1.Figure A.1 Part reference shown with number of partsWhen the number of parts is indicated for several part references using a common leader line, method a) in 4.5 shall be used. See Figure A.2.Example 1 Example 2Figure A.2 Indication of number of parts for several part references with common leader lineDIN EN ISO 6433:2012-12 EN ISO 6433:2012 (E) 8