DIN EN ISO 8222-2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222 2002) German version EN ISO 8.pdf

1、ICS 75.180.30Messsysteme fr Minerallerzeugnisse Kalibrierung Temperaturkorrekturen zur Anwendung auf volumetrischeBezugsmessbehlter (ISO 8222 : 2002)European Standard EN ISO 8222 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been pub

2、lished in accordance with a decision taken by CEN/TC 19 to adopt, withoutalteration, International Standard ISO 8222 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung(Materials Testing Standards Committee).AmendmentsThis standard di

3、ffers from the March 1996 edition in that an equation for calculating the density of water inthe range from 1,0 C to 40 C based on tests carried out at the CSIRO National Measurement Laboratory,Australia, has been included.Previous editionDIN EN ISO 8222: 1996-03.Ref. No. DIN EN ISO 8222 : 2003-04En

4、glish price group 07 Sales No. 110708.03DEUTSCHE NORM April 2003EN ISO 8222Continued overleaf.EN comprises 8 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive ri

5、ght of sale for German Standards (DIN-Normen).Petroleum measurement systemsCalibration Temperature corrections for use when calibratingvolumetric proving tanks (ISO 8222 : 2002)English version of DIN EN ISO 8222Supersedes March 1996edition.English versionICS 75.180.30 Supersedes EN ISO 8222 : 1995.M

6、anagement Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPetroleum measurement systemsCalibration Temperature corrections for use when calibratingvolumetric proving tanks(ISO 8222 : 2002) 2002. CEN All righ

7、ts of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 8222 : 2002 ESystmes de mesure du ptrole talonnage Corrections de temp-rature utiliser lors de ltalonnagedes jauges talons (ISO 8222 : 2002)Messsysteme fr Minerallerzeug-nisse Kalibrierung Temp

8、eratur-korrekturen zur Anwendung aufvolumetrische Bezugsmessbehlter(ISO 8222 : 2002)This European Standard was approved by CEN on 2002-10-09.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anation

9、al standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other

10、language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece

11、, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom.EN ISO 8222November 2002Page 2EN ISO 8222 : 2002ForewordInternational StandardISO 8222 : 2002 Petroleum measurement systems Calibration Temperature corrections for use

12、when cali-brating volumetric proving tanks,which was prepared by ISO/TC 28 Petroleum products and lubricants of the International Organization forStandardization, has been adopted by Technical Committee CEN/TC 19 Petroleum products, lubricants andrelated products, the Secretariat of which is held by

13、 NEN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by May 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the nati

14、onal standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 8222 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 8222 : 2002Page 4EN ISO 8222 : 2002Page 5EN ISO 8222 : 2002Page 6EN ISO 8222 : 2002Page 7EN ISO 8222 : 2002Page 8EN ISO 8222 : 2002