DIN EN ISO 19288-2016 Welding consumables - Solid wire electrodes solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288 2016) German.pdf

1、November 2016 English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 25.160.20!%p“2587798www.din.deDI

2、N EN ISO 19288Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys Classification (ISO 19288:2016);English version EN ISO 19288:2016,English translation of DIN EN ISO 19288:2016-11Schweizustze Massivdrahtelektroden, Massivdrhte und Mass

3、ivstbe zum Schmelzschweien von Magnesium und Magnesiumlegierungen Einteilung (ISO 19288:2016);Englische Fassung EN ISO 19288:2016,Englische bersetzung von DIN EN ISO 19288:2016-11Produits consommables pour le soudage Filslectrodes pleins, fils pleins et baguettes pleines pour le soudage par fusion d

4、u magnsium et des alliages de magnsium Classification (ISO 19288:2016);Version anglaise EN ISO 19288:2016,Traduction anglaise de DIN EN ISO 19288:2016-11www.beuth.deDocument comprises 13 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered author

5、itative.11.16DIN EN ISO 19288:2016-11 2 A comma is used as the decimal marker. National foreword This document (EN ISO 19288:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” (Secretariat AFNOR, France) in collaboration with Technical Committee CEN/TC 121 “Weldi

6、ng and allied processes” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Schweien und verwandte Verfahren (DIN Standards Committee Welding and Allied Processes), Working Committee NA 092-00-03 AA Schweizustze (DVS AG W 5). The DIN Standard

7、s corresponding to the International Standards referred to in this document are as follows: ISO 544 DIN EN ISO 544 ISO 14344 DIN EN ISO 14344 ISO 80000-1:2009 DIN EN ISO 80000-1:2013-08 National Annex NA (informative) Bibliography DIN EN ISO 544, Welding consumables Technical delivery conditions for

8、 filler materials and fluxes Type of product, dimensions, tolerances and markings DIN EN ISO 14344, Welding consumables Procurement of filler materials and fluxes DIN EN ISO 80000-1:2013-08, Quantities and units Part 1: General (ISO 80000-1:2009 + Cor 1:2011) EUROPEAN STANDARD NORME EUROPENNE EUROPI

9、SCHE NORM EN ISO 19288 June 2016 ICS 25.160.20 English Version Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys Classification (ISO 19288:2016) Produits consommables pour le soudage Fils-lectrodes pleins, fils pleins et baguettes pl

10、eines pour le soudage par fusion du magnsium et des alliages de magnsium Classification (ISO 19288:2016) Schweizustze Massivdrahtelektroden, Massivdrhte und Massivstbe zum Schmelzschweien von Magnesium und Magnesiumlegierungen Einteilung (ISO 19288:2016) This European Standard was approved by CEN on

11、 22 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may

12、be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

13、 the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,

14、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management

15、Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19288:2016 EEN ISO 19288:2016 (E) 2 Contents Page European foreword . 3 Foreword 4 Introduction 5 1 Scope 6 2 Normative references 6

16、 3 Classification . 6 4 Symbols and requirements 6 4.1 Symbol for the product . 6 4.2 Symbol for the chemical composition 6 5 Mechanical properties . 7 6 Chemical analysis 7 7 Rounding procedure 7 8 Retest . 7 9 Technical delivery conditions 7 10 Designation 9 Annex A (informative) Explanation of cl

17、assification symbols for chemical composition 10 DIN EN ISO 19288:2016-11 EN ISO 19288:2016 (E) 3 European foreword This document (EN ISO 19288:2016) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and al

18、lied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by Decem

19、ber 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards or

20、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

21、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19288:2016 has been approved by CEN as EN ISO 19288:2016 without any modification. DIN EN ISO 19288:2016-11 ForewordISO (the Int

22、ernational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee ha

23、s been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical

24、standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in acc

25、ordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Detai

26、ls of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an end

27、orsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee respo

28、nsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.Requests for official interpretations of any aspect of this International Standard should be directed to the Secretariat of ISO/TC 44/SC 3 via your national standards body. A complete listing

29、of these bodies can be found at www.iso.org.EN ISO 19288:2016 (E) DIN EN ISO 19288:2016-11 4IntroductionThis International Standard proposes a classification in order to designate solid wire electrodes, solid wires and rods in terms of their chemical composition.There is no unique relationship betwe

30、en the product form (solid wire electrodes, solid wires or rods) and the welding process used (gas-shielded metal arc welding, tungsten inert gas arc welding, plasma arc welding or laser beam welding). For this reason, solid wire electrodes, solid wires and rods may be classified in terms of their c

31、hemical composition.In this International Standard, the symbol of the welding process is not used becausea) different joining processes are performed with the same chemical component consumable, andb) the producer is not able to determine the process symbol before shipping.Mechanical properties of a

32、ll-weld metal test specimens or welded joints will vary from those obtained in production due to differences in welding procedure and the parent material. Mechanical properties of all-weld metal or welded joints are consequently not specified.EN ISO 19288:2016 (E) DIN EN ISO 19288:2016-11 5 1 ScopeT

33、his International Standard specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. The classification is based on their chemical composition.The compositions of solid wire electrodes for metal inert gas (MIG)

34、welding are the same as solid wire electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser beam welding, laser-MIG hybrid welding and other fusion welding processes.2 Normative referencesThe following documents, in whole or in part, are normatively refere

35、nced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 544, Welding consumables Technical delivery conditions for filler materi

36、als and fluxes Type of product, dimensions, tolerances and markingsISO 14344, Welding consumables Procurement of filler materials and fluxesISO 80000-1:2009, Quantities and units Part 1: General. Corrected by ISO 80000-1:2009/Cor 1:20113 ClassificationThe classification is divided into two parts as

37、follows:a) the first part gives a symbol indicating the product to be identified (see 4.1);b) the second part gives a symbol indicating the chemical composition of the solid wire electrodes, solid wires and rods (see Table 1).4 Symbols and requirements4.1 Symbol for the productThe symbol for the sol

38、id wire electrodes, solid wires and rods shall be S.4.2 Symbol for the chemical compositionThe numerical symbols in Table 1 indicate the chemical composition of a solid wire or rod, determined under the conditions given in Clause 6. The first two digits indicate the alloy group. See Annex A for an e

39、xplanation of the numerical symbols.The optional additional chemical symbols in Table 1 indicate the chemical composition and include an indication of the characteristic alloying elements.EN ISO 19288:2016 (E) DIN EN ISO 19288:2016-11 65 Mechanical propertiesMechanical properties of all-weld metal o

40、r welded joints are not part of this classification.6 Chemical analysisChemical analysis shall be performed on specimens of the product or the stock from which it is made. Any analytical technique may be used but, in cases of dispute, reference shall be made to established published methods.7 Roundi

41、ng procedureFor purposes of determining compliance with the requirements of this International Standard, the actual test values obtained shall be subject to ISO 80000-1:2009, B.3, Rule A. If the measured values are obtained by equipment calibrated in units other than those of this International Stan

42、dard, the measured values shall be converted to the units of this International Standard before rounding. If an arithmetic average value is to be compared with the requirements of this International Standard, rounding shall be done only after calculating the arithmetic average. The rounded results s

43、hall fulfil the requirements of the appropriate table for the classification under test.8 RetestIf any test fails to meet the requirement, that test shall be repeated twice. The results of both retests shall meet the requirement. Specimens for the retest may be taken from the original test sample or

44、 from a new test sample. For chemical analysis, retests need be only for those specific elements that failed to meet their test requirement. If the results of one or both retests fail to meet the requirement, the material under test shall be considered as not meeting the requirements of this specifi

45、cation for that classification. In the event that, during preparation or after completion of any test, it is clearly determined that prescribed or proper procedures were not followed in preparing the weld test sample or test specimen(s), or in conducting the tests, the test shall be considered inval

46、id, without regard to whether the test was actually completed, or whether the test results met, or failed to meet, the requirement. That test shall be repeated, following proper prescribed procedures. In this case, the requirement for doubling the number of test specimens does not apply.9 Technical

47、delivery conditionsTechnical delivery conditions shall meet the requirements of ISO 544 and ISO 14344 (but when Schedule 4 is specified, only chemical composition is required).EN ISO 19288:2016 (E) DIN EN ISO 19288:2016-11 7 Table 1 Chemical composition requirementsAlloy symbols Chemical composition

48、, % (by mass)aNumerical Chemical Mg Al Zn Mn Si Cu Ni Fe Ca Be OthersbMg 0602A MgAl6Mn bal. 5,5 to 6,5 0,30 0,24 to 0,6 0,10 0,01 0,002 0,005 0,30Mg 0602B MgAl6Ca2Mn bal. 5,6 to 6,4 0,20 0,26 to 0,50 0,08 0,008 0,001 0,004 1,5 to 2,5 0,01Mg 1101 MgAl10Zn1Mn bal. 9,5 to 10,5 0,75 to 1,25 0,15 to 0,5

49、0,05 0,05 0,005 0,005 0,0002 to 0,00080,30Mg 1313 MgAl3Zn1Mn bal. 2,4 to 3,6 0,50 to 1,50 0,15 to 1,00 0,10 0,05 0,005 0,005 0,04 0,30Mg 1313A MgAl3Zn1Ca1Mn bal. 2,4 to 3,6 0,50 to 1,50 0,15 to 1,00 0,10 0,05 0,005 0,005 0,5 to 1,5 0,05Mg 1611 MgAl7Zn1Mn bal. 5,8 to 7,2 0,40 to 1,5 0,15 to 0,5 0,05 0,05 0,005 0,005 0,0002 to 0,00080,30Mg 1611A MgAl6Zn1 bal. 5,5 to 6,5 0,50 to 1,50 0,15 to 0,40 0,10 0,05 0,005 0,005 0,30Mg 1611B MgAl6Zn1Ca2 bal. 5,5 to 6,5 0,50 to 1,50 0,05 to 0,40 0,08 0,025 0,001 0,004 1