DIN EN ISO 20361-2016 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361 2015) German version EN ISO 20361 2015《液体泵和泵机组 噪声测试规程 2级和3级精确度(ISO 20361.pdf

1、May 2016 English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.20; 23.080!%SM“2484227www.din

2、.deDIN EN ISO 20361Liquid pumps and pump units Noise test code Grades 2 and 3 of accuracy (ISO 20361:2015);English version EN ISO 20361:2015,English translation of DIN EN ISO 20361:2016-05Flssigkeitspumpen und -pumpenaggregate Geruschmessung Genauigkeitsklassen 2 und 3 (ISO 20361:2015);Englische Fas

3、sung EN ISO 20361:2015,Englische bersetzung von DIN EN ISO 20361:2016-05Pompes et groupes motopompes pour liquides Code dessai acoustique Classes de prcision 2 et 3 (ISO 20361:2015);Version anglaise EN ISO 20361:2015,Traduction anglaise de DIN EN ISO 20361:2016-05SupersedesDIN EN ISO 20361:2010-10ww

4、w.beuth.deDocument comprises 30 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.04.16 DIN EN ISO 20361:2016-05 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This standard

5、 has been prepared by Technical Committee ISO/TC 115 “Pumps” in collaboration with Technical Committee CEN/TC 197 “Pumps” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical Engineering), Worki

6、ng Committee NA 060-11-01 AA Kreiselpumpen of Section Pumpen. Representatives of manufacturers and users of pumps, and of the employers liability insurance associations contributed to this standard. This standard contains specifications giving detail to the essential requirements set out in Annex I

7、of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Offi

8、cial Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The International Standards referred to in Clause 2 and the Bibliography, and

9、 which have been taken over as European Standards have been published as the corresponding DIN EN ISO Standards with the same number. Where the International Standards and documents referred to are not also DIN ISO Standards with the same number, there are no national standards available. Amendments

10、 This standard differs from DIN EN ISO 20361:2010-10 as follows: a) the Annexes referring to the old EU Directive 98/37/EC and to European publications have been deleted; b) the standard has been editorially revised. Previous editions DIN 45635-24: 1980-03 DIN EN 12639: 2000-06 DIN EN ISO 20361: 201

11、0-10 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20361 June 2015 ICS 17.140.20; 23.080 Supersedes EN ISO 20361:2009 English Version Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) Pompes et groupes motopompes pour liquides Code dessai acoustiq

12、ue - Classes de prcision 2 et 3 (ISO 20361:2015) Flssigkeitspumpen und pumpenaggregate Geruschmessung Genauigkeitsklassen 2 und 3 (ISO 20361:2015) This European Standard was approved by CEN on 17 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th

13、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

14、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nationa

15、l standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak

16、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN D E NOR M A L I S ATI O N EUR O P I S C HES KOM I T E E F R NOR M UNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation

17、in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20361:2015 E European foreword 3Introduction 61 Scope . 72 Normative references 73 Terms and definitions . 84 Pump family and pump configuration . 85 Sound power level determination 85.1 General . 85.2 Specific

18、 considerations for reference box, measurement surface, position of microphones, and intensity probe 105.2.1 General. 105.2.2 Reference box 105.2.3 Measurement surface and microphone positions 125.2.4 Position of microphones and intensity probes .166 Emission sound pressure level determination 166.1

19、 Basic standard to be used . 166.2 Relevant work station 166.3 Measurement uncertainty 167 Installation and mounting conditions .177.1 General 177.2 Noise test situation . 177.2.1 General. 177.2.2 Test on site . 177.2.3 Test on shop test stand 177.2.4 Test on a specific facility intended for acousti

20、c measurement .178 Operating conditions during noise measurement .188.1 General 188.2 Pumped liquid 188.3 NPSHA value . 189 Information to be recorded 189.1 General 189.2 Test report 1810 Declaration and verification of noise emission values 19Annex A (normative) Pump alone Measurement surface 20Ann

21、ex B (normative) Pump units Microphone positions for sound pressure level measurement on the measurement surface for different pump types and sizes 21Bibliography .28Contents PageAnnex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 20

22、06/42/EC 4 Foreword 5.DIN EN ISO 20361:2016-05 EN ISO 20361:2015 (E)2 European foreword This document (EN ISO 20361:2015) has been prepared by Technical Committee ISO/TC 115 “Pumps” in collaboration with Technical Committee CEN/TC 197 “Pumps” the secretariat of which is held by AFNOR. This European

23、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn at the latest by December 2015. Attention is drawn to the possibility that some of the elemen

24、ts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20361:2009. This document has been prepared under a mandate given to CEN by the European Commission and the Europea

25、n Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries

26、are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

27、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 20361:2015 has been approved by CEN as EN ISO 20361:2015 without any modification. DIN EN ISO 20361:2016-05 EN ISO 20361:2015 (E)3 Annex ZA (informative) Relationship

28、between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Appr

29、oach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this European standard confers, within the lim

30、its of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive (EHSR 1.7.4.2 u) and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this sta

31、ndard. DIN EN ISO 20361:2016-05 EN ISO 20361:2015 (E)4 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.

32、Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internat

33、ional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differe

34、nt types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall

35、not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is

36、information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) s

37、ee the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 115, Pumps.This second edition cancels and replaces the first edition (ISO 20361:2007), which has been technically revised.DIN EN ISO 20361:2016-05 EN ISO 20361:2015 (E)5 IntroductionThe n

38、oise emitted by a pump unit can be radiated by the casing of the pump, the driving system (e.g. motor, gear box, coupling), the piping system, and all the connected structures.On site, the perceived noise can be significantly increased by reverberation effects or by the radiation of extraneous sourc

39、es.Depending on the type of pump it can be useful to know the following:a) the noise of the pumping system (including piping);b) the noise of the pump unit, including the driver and the transmission elements but excluding the noise of the piping system;c) the noise emitted by the pump alone, excludi

40、ng the noise from the driver, transmission elements, and the piping;d) the noise emitted by each of those elements in respect to a given requirement or in view of an efficient sound proofing of the installation.This International Standard describes methods for the determination of the noise emitted

41、by a pump unit case b) or a pump alone case c). Noise emission is expressed in terms of the sound power level of the machine and the emission sound pressure level at the relevant work station (see 6.2).This International Standard is intended to enable the manufacturer to show the effectiveness of no

42、ise reduction, and declare the noise emission levels.This International Standard is a type C standard as stated in ISO 12100-1 and ISO 12100-2.When provisions of this type C standard are different from those which are stated in A or B standards, the provisions of this type C standard take precedence

43、.The machinery concerned and the extent to which noise is covered are indicated in the scope of this International Standard.DIN EN ISO 20361:2016-05 EN ISO 20361:2015 (E)6 1 ScopeThis International Standard specifies all the information necessary to carry out efficiently and under standardized condi

44、tions the determination, declaration, and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test.Noise emission characteristics include emission sound pr

45、essure levels at specified positions and the sound power level. The determination of these quantities is necessary for declaring the noise emission values, and purpose of noise control at source at the design stage.The determination of these quantities is also necessary for comparing the noise emitt

46、ed by liquid pumps on the market.The use of this International Standard ensures the reproducibility of the determination of the airborne noise-emission characteristics within specified limits determined by the grade of accuracy of the basic airborne noise measurement method used. Noise measurement m

47、ethods according to this International Standard are engineering methods (grade 2) and survey methods (grade 3).This International Standard does not deal with the characterization of the structure-borne sound and liquid-borne noise generated by liquid pumps.NOTE This International Standard is intende

48、d to complement EN 809.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3743-11), Acoustics Determin