DIN EN ISO 20823-2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823 .pdf

1、ICS 13.220.40; 75.080Minerallerzeugnisse und verwandte Produkte Bestimmung der Entflammbarkeitscharakteristik vonFlssigkeiten bei Kontakt mit heien Oberflchen Zndverfahren (ISO 20823 : 2003)European Standard EN ISO 20823 : 2003 has the status of a DIN Standard.A comma is used as the decimal marker.N

2、ational forewordThis standard has been published in accordance with a decision taken by CEN/TC 19 to adopt, withoutalteration, International Standard ISO 20823 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Materialprfung (Ma-terials Testing St

3、andards Committee), Technical Committee Minerallerzeugnisse, Schmierstoffe und ver-wandte Produkte.DIN EN ISO 3170 is the standard corresponding to International Standard ISO 3170 referred to in clause 2of the EN.National Annex NAStandard referred to(and not included in Normative references and Anne

4、x ZA)DIN EN ISO 3170 Petroleum liquids Manual sampling (ISO 3170 : 1988 + A1 : 1998)Ref. No. DIN EN ISO 20823 : 2003-10English price group 08 Sales No. 110802.04DEUTSCHE NORM October 2003EN ISO 20823EN comprises 7 pages. No part of this standard may be reproduced without the prior permission ofDIN D

5、eutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Petroleum and related productsDetermination of the flammability characteristics of fluids in contactwith hot surfaces Manifold ignition test (ISO 208

6、23 : 2003)English version of DIN EN ISO 20823English versionICS 75.080Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPetroleum and related productsDetermination of the flammability characteristic

7、s of fluids in contact withhot surfaces Manifold ignition test(ISO 20823 : 2003) 2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 20823 : 2003 EPtrole et produits connexes Dtermination des caractristiquesdinflammabilit de fl

8、uides au contactde surfaces chaudes Essai din-flammation sur mtal chaud(ISO 20823 : 2003)Minerallerzeugnisse und verwandteProdukte Bestimmung der Ent-flammbarkeitscharakteristik vonFlssigkeiten bei Kontakt mit heienOberflchen Zndverfahren(ISO 20823 : 2003)This European Standard was approved by CEN o

9、n 2003-07-02.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be ob

10、tained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre

11、 hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, an

12、d the United Kingdom.EN ISO 20823August 2003Page 2EN ISO 20823 : 2003ForewordInternational StandardISO 20823 : 2003 Petroleum and related products Determination of the flammability characteristics of fluidsin contact with hot surfaces Manifold ignition test,which was prepared by ISO/TC 28 Petroleum

13、products and lubricants of the International Organization forStandardization, has been adopted by Technical Committee CEN/TC 19 Petroleum products, lubricants andrelated products, the Secretariat of which is held by NEN, as a European Standard.This European Standard shall be given the status of a na

14、tional standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by February 2004 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement

15、this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.Endorsement noticeThe text of the International S

16、tandard ISO 20823 : 2003 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 20823 : 2003Page 4EN ISO 20823 : 2003Page 5EN ISO 20823 : 2003Page 6EN ISO 20823 : 2003Page 7EN ISO 20823 : 2003