DIN EN ISO 21183-1-2007 Light conveyor belts - Part 1 Principal characteristics and applications (ISO 21183-1 2005)English version of DIN EN ISO 21183-1 2007-05《轻型传送带 第1部分 主要特征和应用》.pdf

1、May 2007DEUTSCHE NORM No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 53.040.20!,xa%“9856202www.din.deDDIN EN ISO 2118

2、3-1Light conveyor belts Part 1: Principal characteristics and applications (ISO 21183-1:2005)English version of DIN EN ISO 21183-1:2007-05Leichte Frdergurte Teil 1: Grundeigenschaften und Anwendungen (ISO 21183-1:2005)Englische Fassung DIN EN ISO 21183-1:2007-05SupersedesDIN EN 873:1997-01www.beuth.

3、deDocument comprises 6 pages 08.07English price group 6DIN EN ISO 21183-1:2007-05 2 National foreword This document was prepared by Technical Committee ISO/TC 41 “Pulleys and belts (including veebelts)” and has been adopted as EN ISO 21183-1:2006 by Technical Committee CEN/TC 188 “Conveyor belts” (S

4、ecretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Kautschuktechnik (Rubber Technology Standards Committee), Technical Committee NA 045-02-05 AA Frdergurte. DIN EN ISO 21183 consists of the following parts, under the general title “Light

5、 conveyor belts”: Part 1: Principal characteristics and applications Part 2: List of equivalent terms Amendments This standard differs from DIN EN 873:1997-01 as follows: a) The standard has been editorially revised. Previous editions DIN EN 873: 1997-01 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

6、NORM EN ISO 21183-1 November 2006 ICS 53.040.20 Supersedes EN 873:1996 English Version Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005) Courroies transporteuses lgres - Partie 1: Caractristiques et applications principales (ISO 21183-1:2005) Leichte Frderg

7、urte - Teil 1: Grundeigenschaften und Anwendungen (ISO 21183-1:2005) This European Standard was approved by CEN on 21 October 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

8、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l

9、anguage made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, Franc

10、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

11、NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 21183-1:2006: EForeword The text of ISO 21183-1:2005 has been prepared by Technical Committee ISO/TC 41 “Pulley

12、s and belts (including veebelts)” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 21183-1:2006 by Technical Committee CEN/TC 188 “Conveyor belts”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national sta

13、ndard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by May 2007. This document supersedes EN 873:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizatio

14、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

15、 Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 21183-1:2005 has been approved by CEN as EN ISO 21183-1:2006 without any modifications. EN ISO 21183-1:2006 (E) 2 1 Scope This part of ISO 21183 describes the principal characteristics and applications of li

16、ght conveyor belts. This description is necessary either for limiting the validity of certain standards to light conveyor belts or for excluding light conveyor belts from the validity of certain standards. 2 Description 2.1 Applications 2.1.1 General applications Light conveyor belts are predominant

17、ly used for the indoor transport of unit loads (for example, parcels, boxes, cans, containers, luggage, industrial goods of all kinds and foodstuffs). In many cases, light conveyor belts are incorporated into a machine as an integral machine element. They are then called machine belts (also known as

18、 machine tapes). In that function, they perform either just as a conveying element that additionally participates in a manufacturing action or in a manufacturing process. In such applications, machine belts sometimes get special names. EXAMPLE 1 Machines using machine belts with a pure conveying fun

19、ction: paper processing machinery (printing, cutting, etc.), letter sorting/cancelling machines, ticket vending/defacing automats, packaging machines. EXAMPLE 2 Machines using machine belts participating in a manufacturing action or in a manufacturing process: newspaper folding machines, processing

20、machinery for dough, chocolate and sweets, special processing machines for paper and plastic foil, cigarette manufacturing machines. EXAMPLE 3 Machine belts with special names: folder-gluer belts, tube-winder belts, printing blankets; processing belts in drying, coating, par ticle board manufacturin

21、g and other uses. 2.1.2 Other applications Bulk foods conveying with light conveyor belts can be found in the chemical, pharmaceutical, cosmetic, food, agricultural, wood and tobacco industry. However they are almost always in indoor applications or outdoors under cover. EXAMPLE Granular or powdered

22、 materials, corn, rice, fruits, vegetables, wood chips, tobacco. Outdoor applications of light conveyor belts are seldom encountered but are increasing for example, agricultural equipment, particularly some harvesting machines. EN ISO 21183-1:2006 (E) 3 2.2 Construction The tensile strength of light

23、 conveyor belts is normally provided by mainly synthetic fabric plies (polyamide, polyester, etc.) connected with each other either by bonding agents or by means of intermediate layers of different thickness, usually of thermoplastic material. The covers on both sides are function-related in materia

24、l, thickness and texture. All combinations are possible, from no coating via thin impregnation to thick coating and from ultra smooth to very rough surface. Coating materials may be thermoplasts (PVC, TPU, etc.), cross-linked synthetics (rubbers, PUR, etc.) and many others, all in very different har

25、dness and other varieties of formulation. Highly specialized constructions are found with machine belts very elastic belts, monolithic foils, surfaces with very high or low friction characteristics, etc. 2.3 Dimensions Light conveyor belts are almost exclusively manufactured in large widths (up to a

26、 few metres) and then are cut to any required dimension. The dimensions of light conveyor belts are not standardized. Standardization would not be suitable as the light conveyor belts are predominantly used on non-standardized installations. The overall thicknesses vary from a few tenths of a millim

27、etre to several millimetres, depending on the specific application (e.g. 10 mm or more in the case of light conveyor belts for the paper processing industry). The widths vary from about 10 mm (machine belts) to a few metres (processing belts). The lengths vary from about 500 mm to about 100 m. 2.4 P

28、roperties The ultimate tensile strengths vary from less than 100 N/mm of belt width to several hundred newtons per millimetre of belt width (e.g. to about 1 000 N/mm of belt width in highly specialized belt constructions with aramid fabrics). The maximum admissible working load is about 1/10 of the

29、ultimate tensile strength. As mentioned in 2.2, the properties vary within a broad range and are function-related and, in the case of many types, are designed to meet highly specific application demands. EXAMPLE 1 Special light conveyor belts for the electronics industry have highly conductive cover

30、s with very small electric surface resistances and produce no measurable electric field strength when running. These light conveyor belts are highly antistatic. EXAMPLE 2 Normal light conveyor belt covers are mostly insulators which usually generate high electric field strengths. Nevertheless, with some belts, no significant electric field strength is produced when the belt is running because of an electrically conductive layer inside the belt. These belts are antistatic in the sense of light conveyor belt technology. EN ISO 21183-1:2006 (E) 4