DIN EN ISO 28927-10-2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10 Percussive drills hammers and breakers (ISO 28927-10 2011) Ger.pdf

1、July 2011 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 1

2、7.160; 25.140.01!$sZY“1805554www.din.deDDIN EN ISO 28927-10Hand-held portable power tools Test methods for evaluation of vibration emission Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)English translation of DIN EN ISO 28927-10:2011-07Handgehaltene motorbetriebene Maschinen Me

3、ssverfahren zur Ermittlung der Schwingungsemission Teil 10: Bohrhmmer, Schlaghmmer und Aufbruchhmmer (ISO 28927-10:2011)Englische bersetzung von DIN EN ISO 28927-10:2011-07Machines moteur portatives Mthodes dessai pour lvaluation de lmission de vibrations Partie 10: Marteaux percussion, perforateurs

4、 et brise-bton (ISO 28927-10:2011)Traduction anglaise de DIN EN ISO 28927-10:2011-07SupersedesDIN EN 28662-2:1995-10,DIN EN 28662-3:1995-10,DIN EN 28662-5:1995-10 andDIN EN 28662-100:2002-02www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authori

5、tative.3506.11 DIN EN ISO 28927-10:2011-07 National foreword This standard has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment”, Subcommittee SC 3 “Pneumatic tools and machines” in collaboration with Technical Committee CEN/TC 231 “Mechanical

6、vibration and shock” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Akustik, Lrmminderung und Schwingungstechnik im DIN und VDI (Acoustics, Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Working Committee NA

7、001-03-07-02 UA (NALS/VDI C 7.2) Hand-Arm-Schwingungen. In DIN 45679, “feed force” is force applied by only one hand; in ISO 15230 feed force refers to both hands (there it is defined as the “sum of the push force of both hands”). In the present standard, in cases where a machine is operated with bo

8、th hands “feed force” is to be taken to mean the sum of the force of both hands. In the Introduction, it is stated that the basic principle for transducer positioning in accordance with EN 60745 has been adopted, which represents a deviation from ISO 20643:2005. This approach is included in Amendmen

9、t 1 to ISO 20643:2005. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 5349-1 DIN EN ISO 5349-1 ISO 5349-2 DIN EN ISO 5349-2 ISO 12100 DIN EN ISO 12100 ISO 20643 DIN EN ISO 20643 IEC 60745 (series) DIN EN 60745 (VDE 0740) (series) The G

10、erman Standards are given in National Annex NA “Bibliography”. Standards designated EN xxx are identical to German Standards designated DIN EN xxx. Amendments This standard differs from DIN EN 28662-2:1995-10, DIN EN 28662-3:1995-10, DIN EN 28662-5:1995-10 and DIN EN 28662-100:2002-02 as follows: a)

11、 the standards have been combined in one standard; b) vibrations are measured in three axes and at both hand positions; c) new transducer positions have been specified for the measurements; d) the directions of measurement have been modified; e) the description of the energy absorber has been amende

12、d. Previous editions DIN 45675-4: 1987-09 DIN EN 28662-2: 1995-10 DIN EN 28662-3: 1995-10 DIN EN 28662-5: 1995-10 DIN EN 28662-100: 2002-02 2 A comma is used as the decimal marker. DIN EN ISO 28927-10:2011-07 National Annex NA (informative) Bibliography DIN 45679, Mechanical vibration Measurement an

13、d evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration DIN EN 60745 (VDE 0740) (all parts), Hand-held motor-operated electric tools Safety DIN EN ISO 5349-1, Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibrati

14、on Part 1: General requirements DIN EN ISO 5349-2, Mechanical vibrations Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace DIN EN ISO 12100, Safety of machinery General principles for design Risk assessment and risk

15、 reduction DIN EN ISO 20643, Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission E DIN EN ISO 20643/A1, Mechanical vibration Hand held and hand guided machinery Principles for evaluation of vibration emission Amendment 1 ISO 15230, Mechanical vibr

16、ation and shock Coupling forces at the man-machine interface for hand-transmitted vibration 3 DIN EN ISO 28927-10:2011-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 28927-10 April 2011 ICS 13.160; 25.140.10 English Version Hand-held portable power too

17、ls Test methods for evaluation of vibration emission Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) Machines moteur portatives Mthodes dessai pour lvaluation de lmission de vibrations Partie 10: Marteaux percussion, perforateurs et brise-bton (ISO 28927-10:2011) Handgehaltene m

18、otorbetriebene Maschinen Messverfahren zur Ermittlung der Schwingungsemission Teil 10: Bohrhmmer, Schlaghmmer und Aufbruchhmmer (ISO 28927-10:2011) This European Standard was approved by CEN on 14 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

19、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standar

20、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nation

21、al standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

22、 and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO

23、 28927-10:2011: EContents Page Foreword 3Annex ZA (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC 30Introduction.4 1 Scope5 2 Normative references5 3 Terms, definitions and symbols 6 3.1 Terms and definitions .6 3.2 Symbols7 4

24、Basic standards and vibration test codes 7 5 Description of the family of machines 7 6 Characterization of vibration11 6.1 Direction of measurement 11 6.2 Location of measurements.11 6.3 Magnitude of vibration15 6.4 Combination of vibration directions16 7 Instrumentation requirements .16 7.1 General

25、 .16 7.2 Mounting of transducers 16 7.3 Frequency weighting filter16 7.4 Integration time16 7.5 Auxiliary equipment 17 7.6 Calibration17 8 Testing and operating conditions of the machinery17 8.1 General .17 8.2 Operating conditions 17 8.3 Other quantities to be specified.18 8.4 Attached equipment, w

26、orkpiece and task.18 8.5 Operator .23 9 Measurement procedure and validity23 9.1 Reported vibration values 23 9.2 Declaration and verification of the vibration emission value .23 10 Measurement report24 Annex A (informative) Model test report for percussive drills, hammers and breakers .25 Annex B (

27、normative) Determination of uncertainty 27 Annex C (normative) Design of steel ball absorber 29 Bibliography31 EN ISO 28927-10:2011 (E) DIN EN ISO 28927-10:2011-07 2Foreword This document (EN ISO 28927-10:2011) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, mac

28、hines and equipment“ in collaboration with Technical Committee CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

29、October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pa

30、tent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.

31、 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irelan

32、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 28927-10:2011 has been approved by CEN as a EN ISO 28927-10:2011 without any modification. EN ISO

33、28927-10:2011 (E) DIN EN ISO 28927-10:2011-07 3Introduction This document is a type-C standard as stated in ISO 12100. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requ

34、irements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. The vibration test codes for portable hand-held machines given in ISO 28927 (all parts) are based on ISO 20643, which gives general specifications for the measurement

35、 of the vibration emission of hand-held and hand-guided machinery. ISO 28927 (all parts) specifies the operation of the machines under type-test conditions and other requirements for the performance of type tests. The structure/numbering of its clauses follows that of ISO 20643. The basic principle

36、for transducer positioning first introduced in the IEC 60745 series of European standards is followed, representing a deviation from ISO 20643 for reasons of consistency. The transducers are primarily positioned next to the hand in the area between the thumb and the index finger, where they give the

37、 least disturbance to the operator gripping the machine. It has been found that vibrations generated by percussive machines vary considerably in typical use. For percussive machines, the impacting action is the dominating source of vibration and the variation in the result is affected by the quality

38、 of the working/inserted tool, the worked material and the skill of the operator. The values obtained are type-test values intended to be representative of the average of the upper quartile of typical vibration magnitudes in real-world use of the machines. However, the actual magnitudes vary conside

39、rably from time to time and depend on many factors, including the operator, the task and the inserted tool or consumable. The state of maintenance of the machine itself might also be of importance. Under real working conditions the influences of the operator and process can be particularly important

40、 at low magnitudes. It is therefore not recommended that emission values below 2,5 m/s2be used for estimating the vibration magnitude under real working conditions. In such cases, 2,5 m/s2is the recommended vibration magnitude for estimating the machine vibration. If accurate values for a specific w

41、ork place are required, then measurements according to ISO 5349 (all parts) in that work situation could be necessary. Vibration values measured in real working conditions can be either higher or lower than the values obtained using this part of ISO 28927. Higher vibration magnitudes can easily occu

42、r in real work situations, caused by the use of excessively worn or bent inserted tools. The vibration test codes given in ISO 28927 (all parts) supersede those given in ISO 8662 (all parts) , which has been replaced by the corresponding parts of ISO 28927 (see Foreword). NOTE ISO 8662-11, Hand-held

43、 portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools, could be replaced by a future part of ISO 28927. EN ISO 28927-10:2011 (E) DIN EN ISO 28927-10:2011-07 41 Scope This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration

44、emission at the handles of hand-held power driven percussive machines with and without rotary action portable rock drills, plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers or similar. It is a typ

45、e-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with an inserted tool bit. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for making holes in hard materials, such as ro

46、ck and concrete. It is also applicable to breakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) and for hammers intended to work in any direction to perform riveting or chiselling work. It is not applicable to impact drills with direct mechanical impac

47、t mechanisms. This part of ISO 28927 is not applicable to jack leg type rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but by an additional device). It is intended that the results be used to compare different models of the same type of machine.

48、NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2787, Rotary and percussive pneumatic tools Performance tests ISO 53