1、DEUTSCHE NORM December 2004DIN ISO 10110-17 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 8 www.
2、din.de www.beuth.de05.05 9625622Continued overleaf.Document comprises 7 pages.Optics and photonicsPreparation of drawings for optical elements and systemsPart 17: Laser irradiation damage threshold(ISO 10110-17 : 2004)Optik und Photonik Erstellung von Zeichnungen fr optische Elemente und Systeme Tei
3、l 17: Zerstrschwelle fr Laserstrahlung (ISO 10110-17 : 2004)This standard incorporates International StandardISO 10110-17 Optics and photonics Preparation of drawings for optical elements and systems Part 17: Laser irradiation damage threshold.A comma is used as the decimal marker.National forewordT
4、his standard has been prepared by ISO/TC 172 Optics and photonics.The responsible German body involved in its preparation was the Normenausschuss Feinmechanik und Optik (Optics and Precision Mechanics Standards Committee).The DIN Standards corresponding to the International Standards referred to in
5、clause 2 of the ISO Standard are as follows:ISO Standard DIN StandardISO 10110-5 DIN ISO 10110-5ISO 10110-6 DIN ISO 10110-6ISO 10110-7 DIN ISO 10110-7ISO 10110-10 DIN ISO 10110-10ISO 11145 DIN EN ISO 11145ISO 11254-1 DIN EN ISO 11254-1ISO 11254-2 DIN EN ISO 11254-2ICS 01.100.20; 31.260; 37.020Nation
6、al Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN EN ISO 11145 Optics and optical instruments Lasers and laser-related equipment Vocabulary and symbols (ISO 11145 : 2001)DIN EN ISO 11254-1 Lasers and laser-related equipment Determination of laser-induced
7、damage threshold of optical surfaces Part 1: 1-on-1 test (ISO 11254-1 : 2000)DIN EN ISO 11254-2 Determination of laser-induced damage threshold of optical surfaces Part 2: S-on-1 test (ISO 11254-2 : 2001)DIN ISO 10110-5 Optics and optical instruments Preparation of drawings for optical elements and
8、sys-tems Part 5: Surface form tolerances (ISO 10110-5 : 1996)DIN ISO 10110-6 Optics and optical instruments Preparation of drawings for optical elements and sys-tems Part 6: Centring tolerances (ISO 10110-6 : 1996)DIN ISO 10110-7 Optics and optical instruments Preparation of drawings for optical ele
9、ments and sys-tems Part 7: Surface imperfection tolerances (ISO 10110-7 : 1996)DIN ISO 10110-10 Optics and optical instruments Preparation of drawings for optical elements and sys-tems Part 10: Table representing data of optical elements and cemented assemblies (ISO 10110-10 : 2004)Page 2 DIN ISO 10110-17 : 2004-12Page 1 ISO 10110-17 : 2004Optics and photonicsPreparation of drawings for optical elements and systemsPart 17: Laser irradiation damage thresholdPage 2 ISO 10110-17 : 2004Page 3 ISO 10110-17 : 2004Page 4 ISO 10110-17 : 2004Page 5 ISO 10110-17 : 2004
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1