DIN ISO 11471-1997 Agricultural tractors and machinery - Coding of remote hydraulic power services and controls (ISO 11471 1995)《农用拖拉机和机具 遥控液压装置和控制装置编码》.pdf

1、DEUTSCHE NORM Mav 1997 Agricultural tractors and machinery Coding of remote hydraulic power services and controls (IS0 11 471 : 1995) DIN IS0 11471 ICs 65.060.1 O Descriptors: Agricultural machinery, tractors, remote control, coding. Landmaschinen und Traktoren - Kennzeichnung von hydraulischen Zapf

2、stellen und Stellteilen (IS0 11 471 : 1995) This standard incorporates International Standard IS0 11471 Agricultural tractors and machinery - Coding of remote hydraulic power services and controls. National foreword This standard has been prepared by ISO/TC 23. The responsible German body involved i

3、n its preparation was the Normenausschu Maschinenbau (Mechanical Engineering Standards Committee), Section Landmaschinen und Traktoren. DIN EN IS0 3767-1 and DIN EN IS0 3767-2 are the standards corresponding to International Standards IS0 3767-1 and IS0 3767-2, respectively, referred to in clause 2

4、of the IS0 Standard. National Annex NA Standards referred to (and not included in Normative references) DIN EN IS0 3767-1 Symbols for operator controls and other displays on tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Part 1: Common symbols DIN EN IS0 3767-2

5、 Symbols for operator controls and other displays on tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Part 2: Symbols for agricultural tractors and machinery (IS0 3767-2 : 1991) (IS0 3767-1 : 1991) IS0 Standard comprises 2 pages. No pari of this standard may be r

6、eproduced without the prior permission of Ref. No. DIN IS0 11471 : 1997-0 Y Deutsches Institut fur Normung e VI Berlin wth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen) English price group 04 Sales No Page 1 IS0 11471 : 1995 Agricultural tractors and

7、machinery Coding of remote hydraulic power services and controls Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical c

8、ommittees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with t

9、he International Electrotechnical Commission (i EC) on all matters of electrotechnical standardization, Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the

10、 member bodies casting a vote. International Standard IS0 11471 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcom- mittee SC 4, Tractors. 1 Scope This International Standard specifies the coding to be used to identify the couplings and control

11、s for the re- mote hydraulic power services of agricultural tractors, machinery and implements. The identification of couplings and controls will be useful to implement manufacturers to enable them to identify the implement hoses with the appropriate extended or retracted cylinder symbol. This will

12、help ensure proper operation of the implement when con- nected to the tractor. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were vali

13、d. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of the standards indicated below. Members of IEC and IS0 maintain registers of cur- rently valid International

14、 Standards. IS0 3767-1 :I 991, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - fart 1: Common symbols. IS0 3767-2:1991, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbo

15、ls for operator controls and other displays - fart 2: Symbols for agricultural tractors and ma- chinery. 3 Requirements 3.1 Each control and the corresponding couplings on the tractor shall be identified by a common nu- merical (Arabic) symbol, which shall be visible to the operator when connecting

16、the couplings at the rear or front of the tractor. 3.2 In addition to the control positions, each coupler shall be identified to show which coupling is con- nected to the pressure source of the tractor for a particular control position (see figure 1 ). Figure 1 - Couplings connected to pressure sour

17、ce Page 2 IS0 11471 : 1995 3.3 The remote cylinder-extend Symbol (I 570), re- mote cylinder-retract symbol (1571) and remote registered in ISo 3767-2. cylinder-float symbol (1 661 according IS0 3767-2 shall be used (see figure 2). NOTE 1 The symbol shown in figure 3 has not yet been I Figure 2 - Hyd

18、raulic cylinder control 3.4 A coupling on the tractor which is connected directly to the tractor hydraulic reservoir may be identified as shown in figure3. Figure 3 - Coupling connected to reservoir 3.5 If a trailer brake system IS provided the brake system symbol (1399) according to IS0 3767-1 shall be used (see figure4). r 1 (O) L _I Figure 4 - Brake system