DIN ISO 262-1999 ISO general purpose metric screw threads - Selected sizes for screws bolts and nuts (ISO 262 1998)《ISO一般用途米制螺纹 螺钉、螺栓和螺母的选用尺寸（ISO 262-》.pdf

1、IS0 general purpose metric screw threads (IS0 262 : 1998) Selected sizes for screws, bolts and nuts ICs 21.040.1 O DIN - IS0 262 This standard, together with DIN IS0 965-2, November 1999 edition, supersedes DIN 13-13, October 1983 edition. I IS0 Standard comprises 2 pages. Metrisches ISO-Gewinde all

2、gemeiner Anwendung - Auswahlreihen fr Schrauben, Bolzen und Muttern (IS0 262 : 1998) This standard incorporates International Standard IS0 262 IS0 general purpose metric screw threads - Selected sizes for screws, bolts and nuts. A comma is used as the decimal marker. National foreword This standard

3、has been prepared by ISO/TC 1. The responsible German body involved in its preparation was the Normenausschu Technische Grundlagen (Fundamentals in Technology Standards Committee). The DIN Standards corresponding to the International Standards referred to in clause 2 of the IS0 Standard are as follo

4、ws: IS0 Standard DIN Standard IS0 261 DIN IS0 261 IS0 5408 DIN 2244 IS0 68-1 DIN IS0 68-1 IS0 965-1 DIN IS0 965-1 Amendments DIN 13-1 3, October 1983 edition, has been superseded by the specifications of DIN IS0 262. Previous editions DIN 40404: 1957-1 1 DIN 13-33: 1960-1 1, 1962-1 O, 1964-06, 1965-

5、08; DIN 13-1 3: 1972-05, 1972-07, 1983-1 O. National Annex NA Standards referred to (and not included in Normative references) DIN 2244 Screw threads - Terminology DIN IS0 68-1 IS0 general purpose screw threads - Basic profile - Part 1 : Metric screw threads DIN IS0 261 IS0 general purpose metric sc

6、rew threads - General plan (IS0 261 : 1998) DIN IS0 965-1 IS0 general purpose metric screw threads -Tolerances - Part 1 : Principles and basic data (IS0 68-1 : 1998) (IS0 965-1 : 1998) Q No part of this standard may be reproduced without the prior permission of Ref. No. DIN IS0 262 : 1999-1 1 DIN De

7、utsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen). English price group 05 Sales No. 0405 04.00 Page 1 IS0 262 : 1998 IS0 general purpose metric screw threads Selected sizes for screws, bolts and nuts Forewo

8、rd IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technic

9、al committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with 60, also take part in the work. IS0 collaborates closely with the international Electrotechnical Commission (IEC) on all matters of ele

10、ctrotechnical standardization. Draf International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 YO of the member bodies casting a vote. International Standard IS0 262 was prepare

11、d by Technical Committee ISOTTC 1, Screw threads, Subcommittee SC 1, Basic data. This second edition cancels and replaces the first edition (IS0 262:1973) which has been technically revised. 1 Scope This International Standard specifies selected sizes for screws, bolts and nuts in the diameter range

12、 from 1 mm to 64 mm of IS0 general purpose metric screw threads (M) having basic profile according to IS0 68-1. These selected sizes are recommended also for general engineering use. These screw threads are selected from IS0 261. For thread designations see IS0 965-1 2 Normative references The follo

13、wing standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are enco

14、uraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 68-1 :1998, IS0 general purpose screw threads - Basic profile - Pari 1: Metric screw threads. IS0 261

15、 :1998, IS0 general purpose metric screw threads - General plan. IS0 965-1 :1998, IS0 general purpose metric screw threads - Tolerances - Pari 1: Principles and basic data. IS0 5408:1983, Cylindrical screw threads - Vocabulafy. 3 Definitions For the purposes of this International Standard, the definitions given in IS0 5408 apply. Page 2 IS0 262 : 1998 4 Selected sizes See table 1. Table 1 Dimensions in millimetres Nominal diameter Pitch