DIN ISO 5610-4-2015 Tool holders with rectangular shank for indexable inserts - Part 4 Style D (ISO 5610-4 2014)《可转位刀片用方柄刀杆 第4部分 D型(ISO 5610-4-2014)》.pdf

1、February 2015 Translation by DIN-Sprachendienst.English price group 8No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 25.100.01; 25.060.20!%?cJ“2286439www.din.deDDIN ISO 5610-4Tool holders with rectangular shank for indexable inserts Part 4: Style D (ISO 5610-4:2014),English translation of DIN ISO 5610-4:2015-02Klemmhalter mit Vierkantschaft fr Wendeschneidplatten Teil 4: Form D (ISO 5610-4:2014),Englische berset

3、zung von DIN ISO 5610-4:2015-02Porte-plaquette queue rectangulaire pour plaquettes amovibles Partie 4: Forme D (ISO 5610-4:2014),Traduction anglaise de DIN ISO 5610-4:2015-02SupersedesDIN 4984-4:2004-07www.beuth.deDocument comprises 13 pagesIn case of doubt, the German-language original shall be con

4、sidered authoritative.01.15A comma is used as the decimal marker. Contents Page National foreword 3 National Annex NA (informative) Bibliography 4 1 Scope 5 2 Normative references . 5 3 Dimensions 5 3.1 General . 5 3.2 Tool holder style D for square indexable insert shape S . 6 3.3 Tool holder style

5、 D for round indexable insert shape R . 8 4 Designation . 10 5 Material . 11 6 Design . 11 6.1 Type of mounting 11 6.2 Corner radius, r . 116.3 Thickness, s, of indexable insert . 11 7 Extent of delivery 11 8 Marking . 12 Bibliography 13 DIN ISO 5610-4:2015-02 2National foreword This document (EN IS

6、O 5610-4:2014) has been prepared by Technical Committee ISO/TC 29 “Small tools”, Subcommittee SC 9 “Tools with defined cutting edges, cutting items” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Werkzeuge und Spannzeuge (DIN Standard

7、s Committee Tools and Clamping Devices), Working Committee NA 121-01-12 AA Dreh- und Bohrwerkzeuge mit Wendeschneidplatten aus harten Schneidstoffen. This is the first edition of the DIN ISO 5610 series, and replaces the DIN 4984 series, which was the basis for this series of International Standards

8、. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such patent rights. DIN ISO 5610 consists of the following parts, under the general title Tool holders with

9、rectangular shank for indexable inserts: Part 1: General survey, correlation and determination of dimensions Part 2: Style A Part 3: Style B Part 4: Style D Part 5: Style F Part 6: Style G Part 7: Style J Part 8: Style K Part 9: Style L Part 10: Style N Part 11: Style R Part 12: Style S Part 13: Sty

10、le T Part 14: Style H Part 15: Style V The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 6987 DIN ISO 6987 Amendments This standard differs from DIN 4984-4:2004-07 as follows: a) the text of the International Standard has been adopted withou

11、t any modification. Previous editions DIN 4984-4: 1980-04, 1987-06, 2004-07 3DIN ISO 5610-4:2015-02 National Annex NA (informative) Bibliography DIN 4000-1, Tabular layouts of properties Part 1: Concepts and principles DIN 4000-76, Tabular layouts of properties Part 76: Inserts, indexable DIN 4000-7

12、7, Tabular layouts of properties Part 77: Inserts, clamped, for grooving, parting and thread machining DIN 4000-90, Tabular layouts of properties Part 90: Tool holders for indexable inserts DIN 4967-1, Indexable hardmetal inserts with rounded corners, with partly cylindrical hole 7 normal clearance

13、DIN 4967-2, Indexable hardmetal inserts with rounded corners, with partly cylindrical hole 11 normal clearance DIN 4968, Indexable hardmetal inserts with rounded corners, without fixation hole DIN 4969-1, Ceramic indexable inserts, with rounded corners, without fixing hole DIN 4983, Tool holders wit

14、h rectangular shank and cartridges for indexable inserts Presentation of the designation DIN 4988, Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole DIN 6580, Terminology of chip removing Movements and geometry of the chip removing process DIN 6581, Terminology of chip

15、 removing Reference systems and angles on the cutting part of the tool DIN 6582, Terminology of cutting Additional terms for the tool, wedge and the cutting edge DIN 6584, Terms of the cutting technique Forces, energy, work, power DIN ISO 6987, Indexable hard material inserts with rounded corners, w

16、ith partly cylindrical fixing hole Dimensions ISO/TS 13399-201, Cutting tool data representation and exchange Part 201: Creation and exchange of 3D models Regular inserts ISO/TS 13399-202, Cutting tool data representation and exchange Part 202: Creation and exchange of 3D models Irregular inserts DI

17、N ISO 5610-4:2015-02 4Tool holders with rectangular shank for indexable inserts Part 4: Style D1 ScopeThis part of ISO 5610 specifies tool holders with rectangular shank, style D, i.e. with straight shank and cutting edge angle r= 45 for side cutting.These tool holders are primarily intended for ind

18、exable inserts made of hard metal or other cutting materials intended to be mounted by clamping and used for turning operations.NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS

19、13399-3 are given in ISO 5610-1:2014, Table A.1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

20、of the referenced document (including any amendments) applies.ISO 5608:2012, Turning and copying tool holders and cartridges for indexable inserts DesignationISO 5610-1:2014, Tool holders with rectangular shank for indexable inserts Part 1: General survey, correlation and determination of dimensions

21、3 Dimensions3.1 GeneralIt is not necessary for tool holders to comply with the pictorial representation; only the dimensions given shall be observed.For determination of dimensions h1, f, and l1, see ISO 5610-1.For explanation of the designation code for tool holders, see ISO 5608.NOTE The values of

22、 rake angles and inclination angles shown in the figures are recommended values; they can vary according to the application.DIN ISO 5610-4:2015-02 53.2 Tool holder style D for square indexable insert shape SKeyaInclination angle, s.bRake angle, o.Figure 1 Tool holder style D for square indexable ins

23、ert SDIN ISO 5610-4:2015-02 6Table 1Dimensions in millimetresSymbolah1js13b h13l3f 0,25h2h13l1ak16l2max.sbSSDCN 1212 0912 12 9,52 6 12 323,97PSDNN 1212 093,18CSDPN 1212 09SSDCN 1616 0916 16 9,52 8 16 323,97PSDNN 1616 093,18CSDPN 1616 09SSDCN 2020 1220 20 12,7 10 20 364,76PSDNN 2020 12CSDPN 2020 12 3

24、,18CSDNN 2525 1225 25 12,7 12,5 25 367,94SSDCN 2525 124,76PSDNN 2525 12CSDPN 2525 12 3,18CSDNN 3225 1232 25 12,7 12,5 32 367,94SSDCN 3225 124,76PSDNN 3225 12CSDPN 3225 12 3,18SSDCN 3232 1932 32 19,05 16 32 456,35PSDNN 3232 19CSDPN 3232 19 4,76aFor the selection of length, l1, the dash can be replace

25、d by the dimensions of ISO 5610-1:2014, Table 2. For the letter symbols identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.DIN ISO 5610-4:2015-02 73.3 Tool holder style D for round indexable insert shape RKeyaInclination angle, s.bRake angle, o.Figu

26、re 2 Tool holder style D for round indexable insert RTable 2Dimensions in millimetresSymbolah1js13b h13d f 0,25h2h13l1ak16sbSRDCN 0808 068 8 6 4 8 2,38PRDCN 0808 06aFor the selection of length, l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For the letter symbols identif

27、ying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.DIN ISO 5610-4:2015-02 8Symbolah1js13b h13d f 0,25h2h13l1ak16sbSRDCN 1010 0610 1065 10 2,38PRDCN 1010 06SRDCN 1010 088 3,18PRDCN 1010 08SRDCN 1212 0612 1266 12 2,38PRDCN 1212 06SRDCN 1212 088 3,18PRDCN 121

28、2 08SRDCN 1616 0616 1668 16 2,38PRDCN 1616 06SRDCN 1616 088 3,18PRDCN 1616 08SRDCN 1616 1010 3,97PRDCN 1616 10SRDCN 2020 0620 20610 20 2,38PRDCN 2020 06SRDCN 2020 088 3,18PRDCN 2020 08SRDCN 2020 1010 3,97PRDCN 2020 10SRDCN 2020 1212 4,76PRDCN 2020 12SRDCN 2525 0625 25612,5 25 2,38PRDCN 2525 06SRDCN

29、2525 088 3,18PRDCN 2525 08CRDNN 2525 09 9,52 4,76SRDCN 2525 1010 3,97PRDCN 2525 10SRDCN 2525 1212 4,76PRDCN 2525 12CRDNN 2525 12 12,7 7,94SRDCN 2525 1616 6,35PRDCN 2525 16aFor the selection of length, l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For the letter symbols

30、identifying the tool length, see ISO 5608:2012, Table 6.bInsert thickness without shim, if applicable.Table 2DIN ISO 5610-4:2015-02 9Symbolah1js13b h13d f 0,25h2h13l1ak16sbSRDCN 3225 1232 251212,5 32 4,76PRDCN 3225 12CRDNN 3225 12 12,77,94CRDNN 3225 15 15,88SRDCN 3225 1616 6,35PRDCN 3225 16CRDNN 323

31、2 1932 3219,0516 32 7,94SRDCN 3232 2020 6,35PRDCN 3232 20SRDCN 4040 2540 402520 40 7,94PRDCN 4040 25CRDNN 4040 25 25,4aFor the selection of length, l1, the dash can be replaced by the dimensions of ISO 5610-1:2014, Table 2. For the letter symbols identifying the tool length, see ISO 5608:2012, Table

32、 6.bInsert thickness without shim, if applicable.4 DesignationA tool holder in accordance with this part of ISO 5610 shall be designated by the following:a) “Tool holder”;b) a reference to this part of ISO 5610 (i.e. ISO 5610-4);c) type of mounting, in accordance with ISO 5608;d) symbol for indexabl

33、e insert shape, in accordance with ISO 5608;e) symbol for tool style, in accordance with ISO 5608;f) symbol for the indexable insert normal clearance, in accordance with ISO 5608;g) symbol for hand of tool, in accordance with ISO 5608;h) its height, h1, width, b, and length, l1(symbol for tool lengt

34、h in accordance with ISO 5608);i) its cutting edge length, l3.EXAMPLE 1 Tool holder for a horizontally mounted bore-clamped (P) square indexable insert shape S (S), tool holder style D (D), for normal clearance of indexable insert n= 0 (N), cutting on both sides (N), with height h1= 32 mm and width

35、b = 25 mm (3225), length l1= 170 mm (P), for cutting edge length l3= 12,7 mm (12) is designated as follows:Tool holder ISO 5610-4 - PSDNN 3225 P12EXAMPLE 2 Tool holder for countersink screw-clamped (S) round indexable insert shape R (R), tool holder style D (D), for normal clearance of indexable ins

36、ert n= 7 (C), cutting on both sides (N), with height h1= 25 mm and width b = 25 mm (2525), length l1= 150 mm (M), for diameter d = 12 mm (12) is designated as follows:Tool holder ISO 5610-4 - SRDCN 2525 M12Table 2DIN ISO 5610-4:2015-02 105 MaterialThe material should be steel with a tensile strength

37、 of at least 1 200 N/mm2.6 Design6.1 Type of mountingStandard design of tool holders with indexable insert shall be mounted in accordance with Tables 1 and 2.Other types of mounting are at the manufacturers discretion or upon agreement. The letter symbol in the designation, symbol 1, shall then be r

38、eplaced by the respective symbol for the chosen or agreed-upon type of mounting in accordance with ISO 5608.For the modified type of mounting deviating from Tables 1 and 2, the relevant indexable insert thickness shall also be considered.6.2 Corner radius, rTool holders in accordance with this part

39、of ISO 5610 can be equipped with indexable inserts with cutting edge length, l3, as specified in Table 1, and any corner radius, r.The values for l1given in ISO 5610-1:2014, Table 2, apply to tool holders with indexable inserts having corner radii, r, in accordance with Table 3.Table 3Dimensions in

40、millimetresl3r9,520,812,719,05 1,2NOTE The values given for rare nominal values. The accurate values converted from the inch dimensions are 0,794 mm and 1,191 mm.For indexable inserts with corner radii, r, other than those specified in Table 3, the dimensions of f shall be determined in accordance w

41、ith ISO 5610-1.The tolerances for h1, f, and l1refer to dimensions measured with master indexable insert and master shim, if any.6.3 Thickness, s, of indexable insertThe values for thickness, s, given in Tables 1 and 2 apply to indexable inserts without shim and for the standard design of tool holde

42、rs.For tool holders for indexable inserts with thicknesses deviating from the specified values, the thickness shall be indicated when ordering or upon delivery (in the handbook).7 Extent of deliveryThe tool holders shall be delivered complete with clamping device, but without indexable insert(s).DIN

43、 ISO 5610-4:2015-02 118 MarkingTool holders shall be marked with the letter symbol and the name or trademark of the manufacturer.Additional marking is at the manufacturers discretion or upon agreement.Deviations in marking may be by mutual agreement.A reference to this part of ISO 5610, i.e. ISO 561

44、0-4:2014, shall be given on the packaging.DIN ISO 5610-4:2015-02 12Bibliography1 ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole Dimensions2 ISO 3002-1, Basic quantities in cutting and grinding Part 1: Geometry of the active part of cutting tools General term

45、s, reference systems, tool and working angles, chip breakers3 ISO 3364, Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole Dimensions4 ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole Dimensions5 ISO/TS 13399-2, Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items6 ISO/TS 13399-3, Cutting tool data representation and exchange Part 3: Reference dictionary for tool itemsDIN ISO 5610-4:2015-02 13