DIN ISO 8562-2016 Cycles - Stem wedge angle (ISO 8562 1990)《自行车 把芯螺楔的角度(ISO 8562-1990)》.pdf

1、July 2016 English price group 5No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 43.150!%XLO“2534144www.din.deDIN ISO

2、 8562Cycles Stem wedge angle (ISO 8562:1990),English translation of DIN ISO 8562:2016-07Fahrrder Winkel fr Schrgkonus am Lenkerschaft (ISO 8562:1990),Englische bersetzung von DIN ISO 8562:2016-07Cycles Angle du coin de serrage de potence (ISO 8562:1990),Traduction anglaise de DIN ISO 8562:2016-07www

3、.beuth.deDocument comprises 5 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.07.16 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-07-01. Contents Page National for

4、eword . National Annex NA (informative) Bibliography 1 Scope . 5 2 Normative reference . 5 3 Stem wedge angle . 5 4 Assembly conditions . 5 43 DIN ISO 8562:2016-07 2 National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Produ

5、ct Safety Act). This document (ISO 8562:1990) has been prepared by Technical Committee ISO/TC 149 “Cycles”. Attention is drawn to the possibility that some elements of this document may be the subject of patent rights. DIN and/or DKE shall not be held responsible for identifying any or all such pate

6、nt rights. Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA)

7、 (German Federal Institute for Occupational Safety and Health), it is to be presumed that stem wedge angles which comply with this standard fulfil the relevant health and safety requirements. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO

8、 4210:1989 No national standard available at the time (current editions: DIN EN ISO 4210-1 to -9) DIN ISO 8562:2016-07 3The responsible German body involved in its preparation was DIN-Normenausschuss Sport- und Freizeitgert (DIN Standards Committee Sports Equipment), Working Committee NA 112-06-01 A

9、A Fahrrder fr allge-meine und sportliche Benutzung. National Annex NA (informative) Bibliography DIN EN ISO 4210-1, Cycles Safety requirements for bicycles Part 1: Terms and definitions DIN EN ISO 4210-2, Cycles Safety requirements for bicycles Part 2: Requirements for city and trekking, young adult

10、, mountain and racing bicycles DIN EN ISO 4210-3, Cycles Safety requirements for bicycles Part 3: Common test methods DIN EN ISO 4210-4, Cycles Safety requirements for bicycles Part 4: Braking test methods DIN EN ISO 4210-5, Cycles Safety requirements for bicycles Part 5: Steering test methods DIN E

11、N ISO 4210-6, Cycles Safety requirements for bicycles Part 6: Frame and fork test methods DIN EN ISO 4210-7, Cycles Safety requirements for bicycles Part 7: Wheels and rim test methods DIN EN ISO 4210-8, Cycles Safety requirements for bicycles Part 8: Pedals and drive system test methods DIN EN ISO 4210-9, Cycles Safety requirements for bicycles Part 9: Saddles and seat-post test methods DIN ISO 8562:2016-07 4 DIN ISO 8562:2016-07 5