DLA A-A-50137 B-1994 SHOES GYMNASIUM BASKETBALL AND OTHER ACTIVITIES HEAVY DUTY《篮球和其他活动用运动鞋》.pdf

1、A-A-50337B m 7999974 0363036 2T3 m I INCH-POUND I A-A-50137B SUPERSEDING A-A-50137A February 15. 1994 June 30,1989 COMMERCIAL ITEM DESCRIPTION SHOES, GYMNASIUM: BASKETBALL AND OTHER ACTIVITIES, HEAVY DUTY The General Services Administration has authorized the use of this commercial item description

2、in preference to MIL-S-43961. Abstract. This commercial item description covers gymnasium shoes. personnel when involved in athletic activities such as basketball. The gymnasium shoes are intended to be worn by military Salient characteristics Desian and construction. The gymnasium shoes shall be wh

3、ite, be lowcut, and have a heavy duty canvas tongue and uppers. The shoes shall have a full length cushion sole and cushion arch support made of sponge rubber. The foxings, toe cap, and outer sole shall be made of natural rubber, synthetic rubber, or a combination of both. The outer sole shall be ma

4、de of nonmarking material. A suitable counter and bias binding material, as used by industry, should be used. The outer sole abrasive index shall be a minimum of 75 (ASTM D 1630) and the outer sole hardness shall be a minimum of 45 and a maximum of 65 (ASTM D 2240). Beneficial comments (recommendati

5、ons, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Im

6、provement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 8430 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50137B H 9

7、999974 0363037 L3T A-A-50137B Each shoe shall have white lacing and two ventilating eyelets on O the inside shank. Shoe sizes 3 through 8-1/2 shall have six pairs of lacing eyelets and sizes 9 through 15 including half- sizes shall have seven pairs of lacing eyelets. Sizes and widths. following size

8、s and widths: The gymnasium shoes shall be provided in the Narrow Sizes 3 - 10 in whole and half sizes Regular Sizes 3 - 15 in whole and half sizes Workmanship. The finished gymnasium shoes shall conform to the quality of product established by this document. of defects shall not exceed the contract

9、ors own quality assurance standards and the quality assurance standards defined by the technical data in the bid package. Resulatorv reauirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. The occurrence Qu

10、ality assurance Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producers own drawings, specifications, standards and quality assurance practices. The Government reserves the right to requ

11、ire proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted

12、to the Government for acceptance comply with all requirements of the contract. Certificate of compliance. Unless otherwise specified in the contract or purchase order, certificates of compliance may be submitted on all components. Examination Visual examination. The gymnasium shoes shall be examined

13、 for the defects listed below. The lot size shall be expressed in units of shoes. The sample unit is one pair of shoes. Defects. The gymnasium shoes shall be examined for the following defects: any hole, cut, tear, inferior materials, workmanship defects such as distortion, wrinkles pleats or excess

14、ive fullness or color not as specified; any spot or stain (outside); 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5013B 74 0363038 076 A-A-50137B thread ends not removed; label missing, incorrect, or illegible; measurement of item not as spe

15、cified. Preservation. Dackins. and markinq. The preservation, packing, and marking shall be as specified in the contract or order. Notes Orderins data a. Title, number, and date of this document b. Sizes and widths required (see Sizes and widths.) c. When palletization is required (see Preservation.

16、 Dackina, and markinq.) Source of Government documents. documents are available from: Copies of military and Federal Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Source of non-Government documents. Copies of non-Government documents are available from:

17、 Means of a Durometer ASTM-D 2240 - Indentation Hardness of Rubber and Plastics by ASTM-D 1630 - Abrasion Resistance of Rubber Compounds for Soles and Heels (Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) Custodians: Civil Agency Coordinating Activity: Army - GL GSA - FSS Navy - NU Air Force - 99 Review Activities: Preparing Activity: Army - GL DLA - CT Air Force - 32, 45, 82 Project No.8430-0430 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-