DLA A-A-50208 A-1987 PROTRACTOR RECTANGULAR《长方形量角器》.pdf

1、A-A-50208A August 5, 1987 SUPERS ED ING A-A-5020 8 May 23, 1983 COMMERCIAL ITEM DESCRIPTION PROTRACTOR, RECTANGULAR The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-P-11720. This description covers a protractor

2、 for use in laying out angles and distances in sketching and in note keeping for surveys. Salient characteristics: The protractor shall be made of methacrylic, extruded, or cast acrylic plastic and shall be similar to figure 1. Graduations, numerals, and markings. All graduations, numerals, and othe

3、r markings shall be molded, impressed, or printed on the underside of the protractor. Lettering and numerals shall be readily legible. Molded or impressed graduations, numerals, and other markings shall be filled with permanent black ink or paint. inch (0.25 millimeter mm) of their true relative pos

4、ition and should be 0.008-inch (0.20 mm) wide, plus or minus 0.002 inch (0.05 mm). Graduation lines should be within 0.010 Laminations. If the markings on the lower suface of the protractor are printed, they shall be protected by a transparent plastic cover sheet of the same material as the protract

5、or, The cover sheet shall be perman- ently affixed by a laminating process and shall not impair the trans- parency of the protractor or cover sheets, nor distort the marking or graduations. from the protractor. There shall be no evidence of the cover sheet separating Edges. All working edges shall b

6、e straight. Regulatory requirements: materials in accordance with Public Law 94-580 to the maximum extent practicable. The offeror/contractor is encouraged to use recovered AMSC NIA FSC 6675 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 7 THIS DOCUMENT CONTAINS PA

7、GES. Licensed by Information Handling ServicesI A-A-50208A Packaging and marking: to overseas Department of Defense (DoD) consignees. specified for shipment to DoD consignees within the Continental United States and to non-DoD consignees worldwide. When a suppliers nomal packaging will satisfy the r

8、equirements for military packaging, it may be used. Military packaging: against physical damage and deterioration in a logistic environment characterized by the following: Military packaging shall be specified when shipments are Commercial packaging may be Each protractor shall be preserved and pack

9、ed to protect 1. 2. 3. 4, 5. Multiple handling during transportaion and in-transit storage. Shock, vibration, and static loading forces during worldwide shipment by ail transport modes. Uncontrolled warehouse storage for extended periods. Weather exposure during shipment and in-transit transfers. St

10、acking loads during shipment and storage. Quantities of protractors destined to a single addressee may be unitized into one or more unit loads. Commericial: protractor shall be packaged in accordance with the suppliers normal method for retail distribution. destination may be unitized to permit hand

11、ling as a single unit. containers shall comply with Uniform Freight Classification or National Motor Freight Classification rules, Unless otherwise specified in the contract or order each Individually packaged protractors shipped to a single Shipping Marking: with the item nomenclature, stock or par

12、t number, quantity per pack, and contract number as a minimum; additional marking shall be as specified in the contract or order. consignees address. contrasting color, of an appropriate size, and of waterproof materials. Unit, intermediate (when provided), and exterior packs shall be marked Exterio

13、r packs shall have in addition the complete Markings shall be applied in a legible manner, in a Quality assurance. defects, The protractors shall be examined for the following Presence of one or more defwts shall be cause for rejection. 1. Dimensions not as specified. 2. Graduations, numerals, and m

14、arkings not as specified. 3. Materials not as specified. 4. Edges not as specified. 5. Lamination8 (if applicable) not as specified. 6. Packaging and marking not as specified. Certification of commercial item. offered to the Government meets the salient characteristics of this description and that t

15、he product conforms to the producers own drawings, specifications, etandards, and quality assurance practices and is the same product as the manufacturers current product offered by the contractor in the commercial market-place for at least one year preceding the solicitation. reserves the right to

16、require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract . The contractor shall certify that the product The Government 2 Licensed by Information Handling Servicesh t a a a A-A-50208A Small business. A small busine

17、ss that cannot meet the certification-of- commercial-item requirement of this document, may make an offer under this solicitation; and, if such small business is the apparent successful offeror, the Government may require the small business to submit a sample protractor. Any such rectangular protrac

18、tor may be evaluated for this solicitation if time to contract award permits. all requirements of this commercial item description and to determine equival- ency to protractors available in the commercial marketplace in the areas of accuracy, durability, human factors engineering, and safety. It sho

19、uld be noted that samples are not required unless specifically requested by the contracting officer. - Note. apparent low bidder for award for this solicitation if a determination of urgency is made by the contracting officer. prior to future solicitation for comparable items. Such evaluation would

20、be to determine conformance to The Government may elect not to evaluate a sample from an The sample would then be evaluated Notes : 1. When this commercial item description is used for procurement, the commercial item certification clause must appear in the solicitation. 2. Figure. The figure shows

21、dimensions and the style of markings for rectangular protractors which have been found acceptable; however, the figure is for illustration only and is not intended to preclude the furnishing of other designs which conform to the salient characteristics. MILITARY INTERESTS : Custodians Army - ME Navy - MC Air Force - 99 CIVIL AGENCY COORDINATING ACTIVITY: GSA-FCGC PREPARING ACTIVITY: Army - ME Review activities Project 6675-0809 Air Force - 82 Navy - MC DLA - GS 3 Licensed by Information Handling ServicesA-A-50208A Licensed by Information Handling Services