DLA A-A-50358 C-2000 COVERALLS DISPOSABLE GENERAL PURPOSE《一般用途的一次性工作服》.pdf

1、INCH-POUNDA-A-50358CDecember 5, 2000SUPERCEDINGA-A-50358B10 December 1990COMMERCIAL ITEM DESCRIPTIONCOVERALLS, DISPOSABLE, GENERAL PURPOSEThe General Services Administration has authorized the use of this Commercial Item Descriptionin Preference to MIL-C-29133.1. SCOPE. This Commercial Item Descript

2、ion covers the requirements for a white nonwovendisposable coverall.2. CLASSIFICATION. The disposable coveralls will be one type in the following sizes:X- Small, Small, Medium, Large, X-Large, XX-Large3. SALIENT CHARACTERISTICS3.1 Description. The one piece white disposable coveralls shall have a co

3、llar, slide fastener frontopening and raglan or set in long sleeves.Beneficial comments, (recommendations, additions, deletions) and any data which may beof use in approving this document should be addressed to: Defense Supply CenterPhiladelphia, Clothing and Textiles Directorate, Attn: DSCP-COCT, 7

4、00 Robbins Avenue,Philadelphia, PA 19111-5096.AMSC N/A FSC 8415DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50358C23.1.1 Seams and stitching. The seam type, stitc

5、h gauge and stitch length shall produce adequatedurable seams throughout the garment.3.2 Material. The material shall be nonwoven cloth and the fibers shall be staple, or filament,composed of polypropylene, polyester, rayon, cotton or a blend thereof. The cloth shall beprocessed by spunbonded, meltb

6、lown, or hydroentangled methods; or a laminate/compositethereof. The white cloth shall meet the following physical requirements.TABLE I. Physical RequirementsCharacteristics Finished Fabric Test methodWeight-oz/yd2minimummaximum1.43.0ASTM-D3776Breaking Strength-lbs (N) MinimumMachine directionCross

7、direction5.05.0ASTM-D5035Tear strength- lbs (N) MinimumMachine directionCross direction5.05.0ASTM D1117Hydrostatic resistance (min.) 3.94 AATCC-127Stiffness in-lbs (max.) .0038 ASTM-D747Thickness (mm) 25.0 ASTM-D1777Air permeability-ft3/min/ft2 30.00 ASTM-D7373.3 Thread. The sewing thread shall be c

8、ommercial type, suitable for the purpose intended. Thecolor of the thread shall be white or natural.3.4 Slide Fastener. The front closing slide fastener shall be of any lightweight type suitable forthe purpose intended.3.5 Label/marking. A commercial type label is acceptable provided that an additio

9、nal labelcontaining the contract number and NSN is placed directly on the coverall by direct printing,marking, stamping or stenciling or may be printed on a pressure-sensitive label on the inside ofthe garment.3.6 Patterns. The government shall furnish a single size, complete set, or a master patter

10、n withgrade rules, to maintain uniformity and consistency in manufacturing. The pattern generallyprovides a seam allowance of 3/8 inch for safety stitched and joining seams. Commercialpatterns may be used in lieu of government patterns, provided they conform to the cited designand finished measureme

11、nts.3.7 Sizes and Measurements. The finished coveralls shall conform to the measurements below.All measurements and tolerances are expressed in inches.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50358C3TABLE II. MeasurementsSizes Chest (A)(1/

12、2circumference)Leg (B)inseamlengthSleeve (C)lengthBody (D)lengthUnderarmwidth (E)Leg (F)openingSlide (G)fastenerX-Small 20 31-1/2 33-1/2 35-1/2 20-3/4 19-1/2 27Small 22 32-1/2 34-1/2 36-1/2 21-3/4 19-1/2 29Medium 24 33-1/2 35-1/2 38 23-1/4 20-1/4 30Large 26 34-1/2 36-1/2 40 24-1/2 21 31X-Large 28 35

13、-1/2 37-1/2 41 25-3/4 21-3/4 32XX-Large30 37 38-1/2 43 27-1/4 21-3/4 33+ 1/2 +3/4 + 1 + 1 + 1/2 + 1/2 + 1/2Note: Refer to Figure 1 for A, B, C, D, E, F, and G.3.8 Label/tag. Each item shall be individually bar-coded with a tag for personal clothing items.The non-permanent tags shall be attached to e

14、ach item, and shall be clearly legible and readableby a scanner. The bar coding element shall be a 13 digit national stock number (NSN). The bar-code type shall be a medium to high code density and shall be located so that it is completelyvisible on the item when it is folded and/or packaged as spec

15、ified.4. REGULATORY REQUIREMENTS4.1. Recycled, recovered, or environmentally preferable materials. Recycled, recovered, orenvironmentally preferable materials should be used to the maximum extent possible providedthat the material meets or exceeds the operational and maintenance requirements, and pr

16、omoteseconomically advantages life cycle costs.5. QUALITY ASSURANCE PROVISIONS5.1 Product Conformance. The products provided shall meet the salient characteristics of thisCID, conform to the producers own drawings, specifications, standards and quality assurancepractices, and be the same product off

17、ered for sale in the commercial market. The governmentreserves the right to require proof of such conformance.5.1.2 Visual examination. Each liner shall be examined for the defects listed below:Material defectsCloth-Any hole, cut, tear, mend, burn, needle chew, anyimbedded foreign matter; overall un

18、cleanness; objectionableodor.Slide fastener-omitted, malformed or damaged.Major101102MinorProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50358C4Seams and stitching-End of stitching not caught in other seams or not securelybackstitched-Pleated or

19、 puckered seam-Stitching excessively loose or tight-Thread breaks not securely overstitched for a 1/2 inch distance-Open seam more than 1 inch-Open seam less than 1 inchDimensions-Measurement of item not as specifiedLabels-Any information illegible, incorrect, incomplete, or missing10310410510610610

20、72012025.2 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchaseorder.6. PACKAGING6.1 Preservation, packing, and marking. The preservation, packing, and marking shall be asspecified in the contract or order.7. NOTES7.1 Source of Government documents. Copies of mi

21、litary and Federal documents are availablefrom:Standardization Documents Order DeskBldg. 4D700 Robbins AvenuePhiladelphia, PA 19111-5094MILITARY INTERESTS:CUSTODIANS CIVIL AGENCY COORDINATING ACTIVITYNavy NU GSA - FSSREVIEW PREPARING ACTIVITY:Navy - SH DLA - CT(Project number 8415- 0190)Provided by

22、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50358C5Coveralls, Disposable General PurposeProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDIZATION DOCUMENT IMPROVEMENT PROPOSALINSTRUCTIONS1. The prep

23、aring activity must complete blocks 1, 2, 3, and 8. In block 1, both the document number and revisionletter should be given.2. The submitter of this form must complete blocks 4, 5, 6, and 7 and send to preparing activity.3. The preparing activity must provide a reply within 30 days from receipt of t

24、he form.NOTE: This form may not be used to request copies of documents, nor to request waivers, or clarification ofrequirements on current contracts. Comments submitted on this form do not constitute or imply authorization to waiveany portion of the referenced document(s) or to amend contractual req

25、uirements.I RECOMMEND A CHANGE: 1. DOCUMENT NUMBERA-A-50358C2. DOCUMENT DATE (YYYYMMDD)2000/12/53. DOCUMENT TITLECoveralls, Disposable, General Purpose4. NATURE OF CHANGE (Identify paragraph number and include proposed rewrite, if possible. Attach extra sheets as needed.)5. REASON FOR RECOMMENDATION

26、6. SUBMITTERa. NAME (Last, First, Middle Initial) b. ORGANIZATIONc. ADDRESS (Include Zip Code) d. TELEPHONE (Include Area Code)(1) Commercial(2) DSN(If applicable)7. DATE SUBMITTED(YYYYMMDD)8. PREPARING ACTIVITYa. NAMEDEFENSE SUPPLY CENTER PHILADELPHIADSCP-Cb. TELEPHONE (Include Area Code)(1) Commer

27、cial (2) DSN(215) 737- 444-c. ADDRESS (Include Zip Code)700 Robbins Ave (Bldg 6, C&T)PHILADELPHIA, PA 19111-5092IF YOU DO NOT RECEIVE A REPLY WITHIN 45 DAYS, CONTACT:Defense Standardization Program Office (DLSC-LM)8725 John J. Kingman Road, Suite 2533Fort Belvoir, Virginia 22060-6221Telephone (703) 767-6888 DSN 427-6888DD Form 1426, FEB 1999 (EG) PREVIOUS EDITION IS OBSOLETE WHS/DIOR, Feb 99Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-