DLA A-A-52087 A-1992 GLOVE INSERTS (COLD WEATHER)《寒冷天气的插入手套》.pdf

1、A-A-52087A 84 9999974 0087482 313 1 INCH-POUND 1 A-A-52087A 22 July 1992 Superseding 10 Dec. 1990 A-A-52087 COMMERCIAL ITEM DESCRIPTION GLOVE INSERTS (COLD WEATHER) The General Services Administration has authorized the use of this Commercial Item Description. Abstract. This description covers the r

2、equirements for glove inserts which are intended for use by all Military services. Classification. The glove inserts shall be in the following sizes: Small, Medium, Large SALIENT CHARACTERI ST ICs *Description. The glove inserts shall be ambidextrous design with knitted hands, fingers and thumbs. Al

3、l parts of the glove insert with the exception of the cuffs shall be knit seamless with a plain (jersey) stitch. The cuffs shall be knit seamless with a mock rib with an elastic yarn laid in every other course and two elastic yarns inserted around the edge of the cuff. The two elastic yarns shall be

4、 overedged stitched twice around and overlapped not less than 1/4 inch. The gloves inserts shall be knit with one end of yarn as specified and shall be made on a fully automatic, 84 needle (Per Side), 13 cut flat bed knitting machine. Beneficial comments (recommendations, additions, deletions) and a

5、ny pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426

6、) appearing at the end of this document or by letter. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52087A 84 9999974 0087483 25T A-A-52087A MAT

7、ERIAL. *Yarn. The yarn for knitting the gloves shall be a 55% acrylic, 25% wool, and 20% hollow-core polyester blend. Acrylic staple, wool, and polyester staple shall be blended, spun, and twisted into a 2/24 worsted count yarn with 10.5 turns per inch for the singles and 5.5 turns per inch for the

8、ply. The acrylic shall be 3 denier 4-1/2 inches nominal staple. The wool shall be virgin fleece not lower in grade than 54s U.S. standard. The polyester shall be 5.5 denier, 12 to 18% void, 4-1/2 inches nominal staple. Elastic yarn. The elastic yarn for every other course of the cuff shall be made o

9、f spandex 210 denier (nominal size) with an inner and outer covering of 100 denier, 2 ply stretch nylon yarn. “Color. The color of all parts of the finished glove shall approximate Brown 436. The dyed glove inserts shall conform to the standard sample for shade and shall show good fastness to launde

10、ring and perspiration when tested in accordance with test methods 5614 and 5680 of FED-STD-191. *Dimensions. The dimensions of the finished gloves shall be as specified in Table I. In addition, the glove insert shall be constructed so that the thumb length shall be 85-90% of the middle finger length

11、, the third finger shall be approximately 90% of the middle finger length, and the fourth finger length shall be approximately 72% of the middle finger length. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52087A 84 m 9999974 0087484 19b A-A-

12、52087A TABLE I. Finished qloves measurements linches) Size Characteristic Sma 11 Medium Large Tolerance Cuff length 3 (Min.) i/ 3 3 - 3/8 + 1/4 + 3/16 - Palm width 2/ 3-7/8 4 4-7/8 - Palm length 3/ 3-1/2 4-1/2 5 Middle finger + 1/8 - width 4/ 1-1/16 1-1/8 1-1/4 Middle finger + 3/16 - length 4/ 2-3/4

13、 3 3-1/4 Index finger + 3/16 - length 5/ 2-1/2 2-3/4 3 NOTE: in a relaxed position. All measurements shall be taken on glove inserts laid flat i/ overedge hem. From top end of mock rib knit to the lower edge, including 2/ From thumb crotch horizontally across the palm. 3/ of mock rib knit at wrist.

14、From crotch between index and middle finger down to top edge 4/ Horizontal at crotch from one side to the other side. 5/ crotch level. From center of fingertip to the center of finger base, at *Weiqht. follows: The weight of the finished glove inserts shall be as Insert Size Sma 11 Medi um Large Oun

15、ces/Dozen Pair (Minimum) 14 15 17 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-52087A 84 m 9999974 0087485 O22 m A-A-52087A Label. Each glove shall have a combination identification, size and instruction label described as type VI, class 14

16、 of DDD-L-20. The color of the label shall be approximately 1-1/2 inches wide and 1-1/4 inches long. The width shall be sewn onto the outside of the insert at the hem of the back hand. The label shall show colorfastness to laundering and contain the following information: GLOVE INSERT CW LIGHTWEIGHT

17、 NSN SIZE CONTRACT NO. NAME OF CONTRACTOR On the underside of the label: Machine or hand wash in warm water with mild soap/detergent DO NOT TUMBLE DRY OR BLEACH *Instruction slip. A printed slip of thin paper containing instructions as indicated below shall be inserted in one glove insert out of eve

18、ry pair: Instructions Glove Inserts, Cold Weather, Lightweight Only wear these gloves inserts with gloves, Mens and womens intermediate cold/wet, MIL-C-44419. The glove inserts can be worn on either right or left hand. Remove the inserts when they become damp from perspiration and replace them with

19、a dry pair of inserts to keep hands warm. *Fittinq. The following schedule dictates the appropriate size insert to be worn with gloves, mens/womens intermediate co Id /we t : Glove insert Intermediate cold/wet glove shell Sma 11 Size 1 or 2 Medium Size 3 or 4 Large Size 5 4 Provided by IHSNot for Re

20、saleNo reproduction or networking permitted without license from IHS-,-,-b *CLEANING A-A-52087A 84 9999974 0087486 Tb9 A-A-52087A *Field Laundry. The glove inser- shall be laundered utilizing formula II of FM 10-280 and air dry. DO NOT TUMBLE DRY OR BLEACH. *Machine/hand laundry. Use permanent press

21、 wash cycle or hand wash using warm water (90 degrees F) and mild laundry detergent or soap and air dry. DO NOT TUMBLE DRY OR USE BLEACH. QUALITY ASSURANCE *Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product

22、 conforms to the producers own drawings, specifications, standards and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for, under the provisions of the contract. Reliance on co

23、ntractor QA systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contract. Requlatory requirements. The offeror/contractor is encouraged to use recovered materials in ac

24、cordance with Public Law 94-580 to the maximum extent practicable. Quality conformance inspection. Unless otherwise specified, sampling for inspection shall be performed in accordance with MIL-STD-105. End item visual examination. Each lot of glove inserts shall be examined for consumer type defects

25、, defined as follows: *Defects in design, construction, or workmanship; any variation in size or color in gloves of a pair; any component full, tight, or twisted; any hole, needle chew, cut or tear, or any spot or stain clearly noticeable; elastic yarn not laid in every other course; not specified n

26、umber of elastic yarns inserted around top edge of cuff; elastic yarns not overedged twice around and overlapped less than 1/4 inch; not properly mated; not labeled as specified. The lot size shall be expressed in units of one glove. The sample unit shall be one glove, and the selection shall be by

27、pairs. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-r A-A-52087A 84 W 9999974 0087487 9T5 End item dimensional examination. The glove inserts shall be examined for conformance to the dimensions specified in Table I. The lot size shall be express

28、ed in units of one glove insert. The sample unit shall be one glove insert and the selection shall be by pairs. Any glove insert not within the specified tolerance shall be classified a defect. PACKAG I NG Packaqinq. Ten pairs of glove inserts of one size only shall be neatly stacked in a bundle and

29、 securely tied with tape or twine. Packinq. One hundred twenty pairs of glove inserts (twelve bundles) of one size only shall be packed in a fiberboard shipping container conforming to RSC-L, Type CF (variety SW) or SF, class domestic, grade 275 of PPP-B-636. Inside dimensions of each shipping conta

30、iner shall approximate 22 inches in length, 10 inches in width, and 6-1/2 inches in depth. Four ounces of flaked naphthalene shall be uniformly distributed throughout the contents of each shipping container. Each container shall have the contents completely covered on the top and bottom with a sheet

31、 of 30-pound minimum basis weight kraft paper conforming to A-A-203. Each container shall be closed in accordance with method II as specified in the appendix of PPP-B-636. Palletization. Gloves packed as specified shall be palletized in accordance with load type Ia of MIL-STD-147. Markinq. In additi

32、on to any special marking required by the contact or purchase order, bundles, shipping containers, and palletized unit loads shall be marked in accordance with MIL-STD- 129. NOTES Intended use. The glove inserts are to be worn for added warmth with the glove shells covered by MIL-G-44419, Gloves, Me

33、ns and Womens, Intermediate Cold/Wet. Orderinq data. Acquisition documents must specify the following: a. Title, number, and date of this document. b. Size required. c. When palletization is required. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

34、-A-A-52087A 84 9999974 0087488 831 A-A-52087A Source for Government documents. documents are available from: Copies of Military and Federal Standardization Documents Order desk Building 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 Custodian: Army - GL Navy - NU Air Force - 99 Coast Guard - CG Review Activity: Army - MD Air Force - 11, 82, 45 User Activities: Navy - MC Civil Agency Coordinating Activity GSA - FSS Preparing Activity DLA - CT Project No. 8415-0868 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-