DLA A-A-55150-1994 CONNECTORS ELECTRICAL IEEE 488 COMPATIBLE RECTANGULAR MINIATURE POLARIZED SHELL PLUG AND RECEPTACLE METRIC SCREW LOCKING AND MOUNTING HARDWARE KIT《硬件试剂盒和公制螺纹锁紧插头.pdf

1、A - A-5 5 35 O 9999979 0363572 849 m O A-A-55150 15 March 1994 COMMERCIAL ITEM DESCRIPTION CONNECTORS, ELECTRICAL, IEEE 488 COMPATIBLE, RECTANGULAR, MINIATURE, POLARIZED SHELL, PLUG AND RECEPTACLE, METRIC SCREW LOCKING AND MOUNTING HARDWARE KIT The General Services Administration has authorized the

2、use of this commercial item description (CID). Abstract. This CID covers the general requirements for metric screw locking and mounting hardware kits for a polarized shell, plug or receptacle, electrical digital interface bus connector. This connector hardware can be used in applications that requir

3、e connectors which conform to the IEEE 488 interface standard. Connector hardware covered by this CID is intended for commercial/industrial applications and may be used in military systems where individual environmental and performance requirements can be met. Part or Identifyinq Number (PIN). The P

4、IN for the CID shall be as shown in the following example: - A-A-55150 I o1 - I I i IL CID number Dash number Salient characteristics. Design, construction, and dimensions. figure I and in accordance with IEEE 488. Design, construction, and dimensions shall be as specified on Connector hardware mate

5、rials. Metric mounting stud standoff. Metric mounting stud standoff shall be of black oxide coated carbon e steel. Pan head screw. Pan head screw shall be of zinc plated steel. Operating temperature. Vibration. The operating temperature range shall be from -40C to +75“C. The hardware, when assembled

6、 and locked to mating connectors, shall exhibit no evidence of breaking, cracking, or loosening of parts when subjected to vibration of 10-55-10 Hz traversed in 1 minute at 1.52 millimeters (.O60 inch) total excursion for 2 hours in each of three mutually perpendicular planes. The hardware, when ass

7、embled and locked to mating connectors, shall exhibit no evidence Physical shock. of breaking, cracking, or loosening of parts when subjected to 50 GIs half-sine wave shock of 11 mi lliseconds duration, 3 shocks in each direction applied along the three mutually perpendicular planes for a total of 1

8、8 shocks. Regulatory requirements. This section is not applicable to this CID. O AMSC N/A FSC 5935 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55150 = 9999974

9、01163573 i85 Dash no. o1 A-A-55150 Screw length (maximum) (LI PC board thickness 6.60 (.260) 1.57 C.062) COUNTERBORE 4.0 DIA 2.0 DEEP, TYP K DR ILL 7. 6 DEEP MAX 7.00 TYP CHEX2 I= i OR 8.D TYP M3,5 X: 0,6-6H (ROUND) 6- 32 UNC- 2A j, Standoff Inside ci i mens ions mount 5. 3mrn 4, 7mm mm INCH 2 o O8

10、4.0 ,I6 4.7 1Y 5.3 21 7.00 275 7 6 .30 8 o .31 12.2 .49 Recommended PC board mounting hardware screw length for PC board thickness: NOTES: 1. Dimensions are in millimeters. 2. Inch-Pound equivalents are shown for information only. Figure 1. Connector, screw locking hardware kit, IEEE standard. L Pro

11、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55150 = 9999974 0363574 bLL A-A-55150 Quality assurance provisions. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the pe

12、rformance of all inspection, examination, and test requirements specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the inspection requirements specified herein, unless disapproved by the Government. e

13、xaminations, or tests set forth in this description where such inspections, examinations, and tests are deemed necessary to assure supplies and services conform to prescribed requirements. The Government reserves the right to perform any of the inspections, Contractor certification statement. The co

14、ntractor shall certify and maintain objective quality evidence that the product offered meets the requirements of this CID, and that the product conforms to the producers own drawings, specifications, standards, quality assurances practices, and is the same as the product provided as a bid sample. t

15、he first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Government reserves the right to require proof of such conformance prior to Certificate of compliance. A certificate of compliance shall accompany all connector hardware supplied to this CID.

16、Packaging. Preservation, packaging, packing, labeling, and marking. Preservation, packaging, labeling, and marking shall be as specified in the contract or purchase order. W. process of acquiring the item, but is not mandatory. This section contains relevant information which is useful to buyers, us

17、ers, and suppliers in the Referenced document. Other Publication INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE) IEEE 488 - IEEE Standard Digital Interface for Programmable Instrumentation. (Applications for copies should be addressed to the Institute of Electrical and Electronics Engineers

18、 (IEEE), IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331.) Acquisition documents should specify the following: Orderinq data. a. CID document number and revision and CID PIN. b. Quality assurance provisions c. Packaging requirements. Comments. Comments on this CID should

19、 be directed to Defense Electronics Supply Center, 1507 Wilmington Pike, ATTN: DESC-EMT, Dayton, OH 45444-5000, or telephone (513) 296-5391. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55150 m 9999974 0363575 558 m o1 A-A-55150 554858-1 007

20、79 I Source of supply. they become available. A suggested source of supply is listed in table I. Additional sources will be added as TABLE I. Suggested source of supply I Vendor commercial Vendor CAGE I A-A-55150- I PIN I number CID PIN Vendor CAGE number 00779 Vendor name and address AMP, Incorporated 470 Friendship Road Harr i sburg, PA 171 11 -1 203 CIVIL AGENCY COORDINATING ACTIVITY: GSA - 7FXE PREPARING ACTIVITY: DLA-ES (Project 5935-D436) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-