DLA A-A-55161 B-2001 FILTER RADIO FREQUENCY INTERFERENCE《射频干扰滤波器》.pdf

1、Beneficial comments recommendations, additions, deletions, clarifications, etc., and any data which may improvethis document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post Office Box3990, Columbus, OH 43213-1199, or telephone (614) 692-0562, or facsimile (FAX) (614) 69

2、3-1644.AMSC N/A FSC 5915DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.INCH-POUNDA-A-55161BSeptember 17, 2001SUPERSEDINGA-A-55161AApril 29, 1994COMMERCIAL ITEM DESCRIPTIONFILTER, RADIO FREQUENCY INTERFERENCEThe General Services Administration has authorized the use

3、of thiscommercial item description (CID) for all federal agencies as areplacement for Federal Specification W-F-2190/1.1. SCOPE. This CID covers the general requirements for radio frequency interference (RFI) suppression power linefilters. These filters consist of capacitors and inductors used in co

4、mbination with each other and are provided withresistors as a safety feature. Filters covered by this CID are intended for commercial/industrial applications andshould not be used in military systems needing stringent environmental and electrical requirements.2. CLASSIFICATION. This CID uses a class

5、ification system which is included in the Part Identification Number(PIN) as shown in the following example (see 7.1).AA55161 -01CID number Dash number3. SALIENT CHARACTERISTICS.3.1 Interface and physical dimensions. Filters supplied to this CID shall be as specified herein (see figures 1 and 2).3.2

6、. Voltage rating. The voltage rating shall be 120 V ac at 60 Hz; 250 V ac at 50 Hz.3.3 Operating frequency. The operating frequency shall be 50/60 Hz.3.4 Current rating. The current rating shall be as specified in table I.3.5 Operating ambient temperature range. The operating ambient temperature ran

7、ge shall be -10G01C to +40G01C atrated current.3.6 Maximum leakage current, line-to-ground. The maximum leakage current, line-to-ground, shall be 0.5 mA at120 V ac, 60 Hz; 1.0 mA at 250 V ac, 50 Hz.3.7 Hipot rating (1 minute). The hipot rating shall be 2,250 V dc line-to-ground; 1,450 V dc line-to-l

8、ine.3.8 Insertion loss. Insertion loss is given for line-to-ground in a 50-ohm circuit. Values shall be as specified in table I.3.9 Electrical schematic. The electrical schematic shall be as specified on figure 1.3.10 Marking. Filters supplied to this CID shall be marked with the manufacturers (MFRs

9、) standard commercial PIN.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55161B2TABLE I. Current rating and insertion loss.Minimum insertion loss (dB)Line-to-ground in 50-ohm circuitFrequency (MHz)PINAA55161-Current rating Electricalschematic.15

10、.5 1 5 103001 1 A A 15 30 38 50 50 5002 1 A B 15 30 38 50 50 5003 2 A A 7202540454804 2 A B 6192842455005 3 A A 15 30 38 50 50 5006 3 A B 15 30 38 50 50 5007 5 A A 7202540454808 5 A B 6192842455009 10 A A 7202540454810 10 A B 619284245501 20 A A 7202540454812 20 A B 61928424550Schematic A Schematic

11、BFIGURE 1. Electrical schematics.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55161B3A(max)B(max)C(max)DG02.015/G02.38E(max)PINAA55161-Inch mm Inch mm Inch mm Inch mm Inch mm01 2.25 57.2 1.82 46.2 0.66 16.8 2.125 53.98 2.53 64.302 3.10 78.7 2.

12、07 52.6 0.91 23.1 2.375 60.33 2.81 71.403 2.25 57.2 1.82 46.2 0.66 16.8 2.125 53.98 2.53 64.304 3.10 78.7 2.07 52.6 0.91 23.1 2.375 60.33 2.81 71.405 2.61 66.3 1.82 46.2 0.78 19.8 2.125 53.98 2.53 64.306 3.10 78.7 2.07 52.6 1.16 29.5 2.375 60.33 2.81 71.407 2.61 66.3 1.82 46.2 0.78 19.8 2.125 53.98

13、2.53 64.308 3.10 78.7 2.07 52.6 1.16 29.5 2.375 60.33 2.81 71.409 2.61 66.3 1.82 46.2 1.16 29.5 2.125 53.98 2.53 64.310 3.35 85.1 2.07 52.6 1.16 29.5 2.375 60.33 2.81 71.411 3.36 85.3 2.07 52.6 1.16 29.5 2.375 60.33 2.81 71.412 3.35 85.1 2.56 65.0 1.53 38.9 2.938 74.63 3.35 85.1NOTES:1. Dimensions a

14、re in inches.2. Metric equivalents are given for general information only.3. Fastons: (Four) .250 inch (6.35 mm).Holes: .07 inch (1.8 mm) diameter.4. Mounting holes: (Two) .188 inch (4.78 mm) diameter.5. Ground faston: .07 inch (1.8 mm) x .155 inch (3.94 mm) slot.FIGURE 2. Case configuration and dim

15、ensions.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55161B44. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to themaximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquis

16、ition Regulation (FAR).5. PRODUCT CONFORMANCE PROVISIONS5.1 Product conformance. The products provided shall meet the salient characteristics of this CID, conform to theproducers own drawings, specifications, standards, and quality assurance practices, and be the same productoffered for sale in the

17、commercial market. The Government reserves the right to require proof of such conformance.6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order.7. NOTES.7.1 PIN. The PIN should be used for Government purposes to buy commercial products to this CID. See secti

18、on 2for PIN format example.7.2 Commercial and Government Entity (CAGE) code. For ordering purposes, inventory control, and submission ofthese filters to DSCC under the Military Parts control Advisory Group (MPCAG) evaluation program, CAGE code58536 should be used.7.3 Source of documents. This sectio

19、n is not applicable to this CID.7.4 Ordering data. The contract or order should specify the following:a. CID document number, revision, and CID PIN.b. Product conformance provisions.c. Packaging requirements.7.5 Commercial products. As part of the market analysis and research effort, this CID was co

20、ordinated with thefollowing manufacturers of commercial products. At the time of CID preparation and coordination, thesemanufacturers were known to have commercial products that would meet the requirements of this CID. (NOTE:This information should not be considered as a list of approved manufacture

21、rs or be used to restrict procurement toonly the manufacturers shown.)MFRs CAGE MFRs name and address0S2B1 RME Filters, IncorporatedP. O. Box 83898 Route 101 AAmherst, NH 03031-083805245 CORCOM, Incorporated844 East Rockland RoadLibertyville, IL 6004864135 Filter Concepts, Incorporated2624 S. Rousse

22、lle StreetSanta Ana, CA 92707Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55161B57.6 Part number (PIN) supersession data. This CID supersedes the following manufacturers PINs as shown. Thisinformation is being provided to assist in reducing pr

23、oliferation in the government inventory system.TABLE II. PIN supersession data.MFRs CAGE0S2B1MFRs CAGE64135MFRs CAGE05245PINAA55161- MFRs Commercial PIN 1/01 RME-A-101-L - 1VB102 RME-A-201-L - 1VK103 RME-A-102-L - 2VB104 RME-A-202-L LF2 2VK105 RME-A-103-L - 3VB106 RME-A-203-L LF3 3VK107 RME-A-105-L

24、- 5VB108 RME-A-205-L LE5 5VK109 RME-A-110-L - 10VB110 RME-A-210-L LE10 10VK111 RME-A-120-L - 20VB112 RME-A-220-L LE20 20VK11/ The manufacturers PIN shall not be used for procurement to the requirements of this CID.At the time of preparation of this CID, the aforementioned commercial products were re

25、viewedand could be replaced by the CID PIN shown. For actual part marking requirements, see 3.11.7.7 Government users. To acquire information on obtaining these filters from the Government inventory system,contact Defense Supply Center Columbus, ATTN: DSCC-VAT, Post Office Box 3990, Columbus, OH 432

26、16-5000,telephone (614) 692-0562 or facsimile (614) 693-1644.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55161B67.7.1 National stock number (NSN). The following is a list of NSNs assigned which correspond to this CID. The listis for informati

27、on only and may not be indicative of all possible NSNs associated with the CID. For up to dateinformation on assigned NSNs, please contact the aforementioned DSCC office (See 7.7).TABLE III. NSNs.PINAA55161-NSN01 -02 -03 -04 -05 -06 -07 -08 -09 -10 5915-01-368-886911 -12 -MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY:GSA - 7FXECustodians:Navy - EC Preparing Activity:DLA-CCProject 5915-0403Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-