DLA A-A-55239 A-1996 SWEATER SERVICE WOOL《羊毛外套》.pdf

1、A-A-55239A = 9999974 0173053 260 A-A-55239A November 1,1996 SUPERSEDING A-A-5 52 3 9 November 3, 1993 COMMERCIAL ITEM DESCRIPTION SWEATER, SERVICE, WOOL The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This commercial

2、item description covers the requirements for a service wool sweater intended for use by personnel of the US Marine Corps. 2. CLASSIFICATION. The sweater shall be one type and color in the following sizes: Schedule of sizes 28/30 38 46 - 32 40 48 34 42 50 36 44 3. SALIENT CHARACTERISTICS. 3.1 DescriD

3、tion. with a crew neck opening and long sleeves with elbow patches. The neckband shall be a 2x2 rib knitted as tightly as the lower skirt and cuff fabric. The neckband shall conform to the finished widths in Table II. The fabric shall be folded lengthwise to form a double neckband 1-1/2 inches wide.

4、 The 2x2 rib knit sweater shall be a pullover-type Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FNS, 2800 South 20th Str

5、eet, Philadelphia, PA 19145-5099. AMSC N/A FSC 8405 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55239A Size No. of ribs across chest (min. ) 3.2 Material. 28/30

6、 32/34 36 38 40 42 44 46 31 34 36 38 40 42 44 46 3.2.1 Basic material. The sweater shall be made of 2-ply yarn, with the yarns spun on a worsted system from combed top. The sweater shall be no less than 95 percent wool, based on dry weight when tested in * accordance with ASTM-D-629, consisting of f

7、leece or pulled wool or a combination of fleece and pulled wool of not lower than 54s U.S. Standard. The use of reprocessed, reused, or waste wool is i prohibited. The wool shall be treated for mothproofing I/. The body and skirt (body welt), and the sleeves and cuffs shall be a 2x2 rib in one conti

8、nuous piece. The color shall match Olive Green Shade No. 2247. The color shall match the standard sample under natural (north sky) daylight or artificial daylight having a color temperature of 7500 K and shall be a good match to the standard sample under incandescent lamplight at 2800 K. The sweater

9、 shall conform to the requirements listed in Table I. TABLE I. Sweater Dhvcical reuuirements 2/ 3/ Characteristic Requirements Test method I Wales/inch (min.) Body and sleeves 6 (face only) Cuffs, skirt, neckband 8 (face only) Courses/inch (min.) Body and sleeves 10 Cuffs, skirt, neckband 13 Colorfa

10、stness to: Perspiration Laundering Dry-cleaning Crocking 4 or good 4 or good 4 or good 4 or good Dimensional stability (percentage): Shrinkage 13 Elongation 13 ASTM-D-3887 ASTM-D-3887 ASTM-D-3887 ASTM-D-3887 AATCC-15 A/ AATCC-61-IA AATCC-13 2 AATCC 8 FED-STD-l91/TM 5556 FED-STD-lSl/TM 5556 Provided

11、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55239A 9999974 0373055 053 A-A-55239A 7 TABLE I. Sweater Dhvsical reauirements a/ a/ - continued 32/34 38 40 42 44 - 4 3-112 to 4 36 11 46 Size 28/3C 1-2 3 to 3-112 26 8-112 9-114 4-114 3-114 7 4s Wi 36 2 3

12、 to 3-112 31 10 48 50 4 4 to 4-112 38 11- 112 3-4 3-112 to 4 34 - 10- 112 No. of body ribs reduced at each armhole Body rik welt depth (skirt height) No. of ribs in sleeve at arm- hole (min. ) Armhole depth 2 3 to 3-112 28 8-112 3-4 3-112 to 4 34 - 10- 112 4 3-112 to 4 36 11 3 3 to 3-112 31 10 11 5

13、3-114 9 sd By 4 4 to 4-112 38 11- 112 Sleeve patch length Sleeve patch width at widest point Sleeve patch width at cuff Shoulder patch length Shoulder patch width 11 5 3-314 9 Of T. 9-114 4-114 3-114 7 o as : 11 5 3-314 9 The S 11 5 3-314 9 11 5 3-314 9 11 5 1-114 9 11 5 3-314 9 11 5 3-314 9 oulder

14、Widtl e Garment 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5523A 9999974 O373056 TT A-A-55239A I/ The contractor shall provide information which certifies that tk finished product was treated with chemicals or materials which have been saf

15、ely used commercially. %/ All measurements and tolerances shall be expressed in inches. 3/ Tolerance for number of ribs across chest (minimum), number of body ribs reduced at each armhole, and number of ribs in sleeve at ) armhole (minimum) shall be 2 1 rib. Tolerance for the armhole depth shall be

16、2 1/2 inch. Tolerance for the sleeve patch and shoulder patch lengths and widths shall be color not as specified or shaded parts when required to be cut from one piece of material; any spot or stain (outside); raw edges; open seams; threads ends not removed; tight tension resulting in tight seams; l

17、oose tension resulting in loose seams; patches not properly shaped, or positioned on the arm properly; any material defects, distorted parts or poor workmanship; heavy yarn or slub more than twice the diameter of the yarn; 7 Provided by IHSNot for ResaleNo reproduction or networking permitted withou

18、t license from IHS-,-,-A-A-55239A 9999974 0373060 430 m A-A-55239A any float, broken yarn or any pulled or snagged yarn; sleeves or bod1 improperly shaped to provide normal taper; tape tight, loose, or not proper length; any component part omitted; label missing, incorrect, or illegible; measurement

19、 of item not as specified; bar code omitted or not readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar code not visible on folded; packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. L , 4.4 AcceP

20、tance criteria. Acceptance criteria shall be as specified in the contract or purchase order. 5. PACKAGING 5.1 Preservation. Dackincr, and marking. The preservation, packing, and marking shall be as specified in the contract or purchase order. 6. NOTES 6.1 Source of Government documents. Copies of mi

21、litary and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 6.2 Source of non-Government documents ASTM Test Methods (Applications for copies should be addressed to American Society For Testing and Materials (ASTM), 10

22、0 Barr Harbor Drive, West Conshohocken, PA 19428-2959.) AATCC Test Methods (Applications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215.) MILITARY INTERESTS: Custodian: Navy - MC CIVIL AGENCY COORDINATING

23、 ACTIVITY : GSA - FSS PREPARING ACTIVITY: DLA - CT Project 8405-0300 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55239A A BACK VIEW J FIGURE 1. Sweater, Service, Wool 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55239A 48 Thru 60 12“ ALL DIMENSIONS ARE TAKEN IN INCHES FIGURE 2. Sweater, Service, Wool (Sleeve Patch) 10 L Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-