DLA A-A-55262-1994 SLEEPING BAG MODULAR《标准尺寸的睡袋》.pdf

1、A-A-552b2 = 99Ci974 OLb72bL 8T IINCH-POUNDI A-A-5 5 2 6 2 November 15, 1994 COMMERCIAL ITEM DESCRIPTION SLEEPING BAG, MODULAR The General Services Administration has authorized the use of this commercial item description (CID). 1. SCOPE. This commercial item description covers a modular sleeping bag

2、 system that consists of a patrol sleeping bag, an intermediate cold weather sleeping bag and a compression stuff sack to carry the complete system. This system is constructed to insulate the user in environments ranging from mild weather to extreme cold weather. 2. CLASSIFICATION. The sleeping bags

3、 shall be of the following types : Type I - Sleeping Bag, Patrol Type II - Sleeping Bag, Intermediate Cold Weather (ICW) Type III - Sleeping Bag, Extreme Cold Weather (ECW) (Sleeping Bag, Patrol, joined to Sleeping Bag, Intermediate Cold Weather) I Beneficial comments, recommendations, additions, de

4、letions, clarifications, etc., and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, ATTN: DPSC-FQSD, 2800 South 20th Street, Philadelphia, PA 19145-5099. AMSC N/A FSC 8465 DISTRIBUTION STATEMENT A: Approved for public re

5、lease; distribution is unlimited. Licensed by Information Handling ServicesA-A-5 5 2 6 2 3. SALIENT CHARACTERISTICS 3.1 General description. The system shall consist of two “Mumy- bag“ type sleeping bags (patrol bag and intermediate cold weather bag), constructed of water-resistent, ripstop nylon, a

6、nd a compression stuff sack into which the bags shall be placed. The patrol bag shall be designed for use in temperate climates (approximately 30 to 50 degrees Fahrenheit). The intermediate cold weather bag shall be designed for use in cold weather climates (approximately 30 to minus 10 degrees Fahr

7、enheit). The patrol and intermediate bags shall be fully functional indepen- dent sleeping bags. They shall be used separately, or together, by inserting the intermediate cold weather bag within the patrol bag, attached by using snap fasteners, to form an extreme cold weather bag system. The extreme

8、 cold weather bag configuration shall provide insulation to at least minus 30 degrees Fahrenheit for a user dressed in polypropylene expedition weight undershirt and drawers and standard cushion sole socks and to minus 50 degrees Fahrenheit for a user wearing various layers of ECW clothing. The maxi

9、mum gross weight of the combined intermediate and patrol bags shall be 7.0 pounds. The stuff sack, when packed with the sleeping bags, shall be capable of being compressed to one cubic foot and shall fit in the sleeping bag compartment of the large field pack with internal frame (MIL-F-44324). Each

10、bag, either independently or when joined together, shall be compatible with the vapor permeable bivy cover (MIL-C-44307). 3.2 Modular sleepinu bau components 3.2.1 Sleepinq baq, p atrol (type I). The patrol bag shall provide the user with adequate insulation to as low as 30 degrees Fahrenheit and sh

11、all weigh approximately 3 pounds. The insulating material shall be a lightweight, highly compressible, synthetic material conforming to requirements indicated in 3.3. The insulation shall not migrate in the bag. The patrol bag shall be found to be free from cold spots and no individual Clo value rea

12、ding shall be less than 5.5 when tested in accordance with ASTM-F 1291. Inside dimensions of the patrol bag shall be 90 to 92 inches, measured from the bottom of the foot to the top of the hood, 36 to 37 inches wide at its widest point, 22 to 24 inches wide at its narrowest point (measured across se

13、am at top footbox), as measured from side seam to side seam. Measurements shall be taken with the sleeping bag turned inside out. The foot section shall have an anatomically designed foot box and shall contain at least the same amount of insulation as the rest of the patrol bag. 2 I Licensed by Info

14、rmation Handling ServicesA-A-55262 m 9999974 0167263 752 H A-A-55 26 2 The patrol bag shall have a reversible double pull (open end-to-end) slider that shall permit top or bottom ventilation and the finished measurement shall be 54 inches (2 1/4 inch) (see 3.6). The non-locking slide fastener shall

15、self repair during field use if it becomes jammed or snagged. The slide fastener end at the head of the bag shall have a device to prevent inadvertent opening. The slide fastener area shall have a draft flap or tube to prevent heat loss and shall be constructed to prevent the slide fastener from ina

16、dvertently catching the liner or draft tube or flap material. The draft tube of the patrol bag shall be constructed to lay against the slide fastener of the patrol bag inside the bag. The patrol bag shall have an adjustable hood for heat retention. The hood shall contain, at a minimum, the same leve

17、l of insulation as the rest of the bag. Adjustments to the hood shall be made by a cord and barrel lock. 3.2.2 Sleepinq Bas, Intermediate Cold Weather (ICW) (type III. The intermediate bag shall provide the user with adequate insulation to as low as O degrees Fahrenheit and shall weigh approximately

18、 4 pounds. The insulation material shall be a lightweight, highly compressible, synthetic material conforming to requirements indicated in 3.3. The insulation shall not migrate in the bag. The intermediate cold weather bag shall be found to be free from cold spots and no individual Clo value reading

19、 shall be less than 6.5 when tested in accordance with ASTM-F 1291. The foot section shall have an anatomically designed foot box and shall contain at least twice the amount of insulation as the rest of the bag. A chest collar shall be sewn along the inside of the intermediate cold weather sleeping

20、bag, at the top of the chest area, to prevent air- drafting up and down through the hood. The chest collar will be quilted with the same insulating material as in the intermediate cold weather bag. Inside dimensions of the intermediate cold weather bag shall be 85 to 87 inches, measured from the bot

21、tom of the foot to the top of the hood, 34.5 to 35.5 inches wide at its widest point, 21 to 23 inches wide at its narrowest point (measured across seam at top of footbox), as measured from side seam to side seam. Measurements shall be taken with the sleeping bag turned inside out. The hood and the s

22、lide fastener for the intermediate cold weather bag shall be as described for the patrol bag (see 3.2.1). 3.2.3 Sleepinq Baq, Extreme Cold Weather (ECW) (Sleepinq Baq, Patrol, ioined to Sleepinq Baq, Intermediate Cold Weather). The sleeping bag (ECW) shall consist of the patrol sleeping bag and the

23、intermediate 3 Licensed by Information Handling Services _ A-A-55262 W 9999974 0367264 699 . A-A-5526 2 cold weather sleeping bag (ICW). The patrol and the intermediate cold weather bags shall have the appropriate hardware to allow them to be joined and to form the extreme cold weather sleeping bag

24、(ECW). The joined bags shall be engineered to allow the user access to the interior of the extreme cold weather bag by way of the patrol bag slide fastener. This configuration is designed for temperatures from minus 10 degrees Fahrenheit to minus 50 degrees Fahrenheit when used with varying layers o

25、f clothing. 3.2.4 Stuff sack, compression. The stuff sack shall be cylindrical in shape and shall be 28 to 30 inches in length and 12 to 14 inches in diameter. A user wearing cold weather mittens shall be able to easily stuff both component bags (joined together) inside. The stuff sack shall compres

26、s from end to end, reducing sack length; and shall fully compress the patrol bag and the intermediate cold weather bag or both bags with bivy cover to a maximum volume of one cubic foot. The stuff sack shall be constructed from 200 denier plain weave, water- resistant, coated nylon cloth. The stuff

27、sack shall be compressed by means of at least six (6) one-inch wide nylon webbing straps, adjustable by means of ladderlock (or equal) buckles. Reinforcement webbing shall be sewn around the circumference of the bag (i.e., around the top and bottom of bag). Webbing, to be used as a handle .when shak

28、ing sleeping bags out of stuff sack, shall be sewn to bottom of bag. The stuff sack shall also have a nylon drawcord closure with a barrel lock (or equal) extending through a metal grommet. The color of the cloth shall match Black 357. 3.2.5 Flammability. The materials used to construct the modular

29、sleeping bag (MSB) shall not be hazardous to personnel. The MSB components must meet established federal/commercial flammability standards for sleeping bags (CPAI-75) (see 7.2). 3.2.6 Launderinq, compressional recovery. The sleeping bags shall be laundered in accordance with FED-STD-191 test method

30、5556.1, using the cotton laundering procedure for five cycles. The drying temperature shall be 140 degrees Fahrenheit to 160 degrees Fahrenheit. The bags insulation shall not clump up after machine washing and shall regain at least 80 percent of its loft when tested after laundering. For compression

31、al recovery, the initial thickness shall be measured with the sample under a light pressure of 0.0004 lb/in2. The sample shall be placed under a pressure of 0.67 lb/in and held for one hour. The thickness after compression shall be measured in the same manner as initial thickness. The percent compre

32、ssional recovery shall be calculated as follows: 2 Percent Compressional Recovery = Thickness after compression x 100 Initial Thickness 4 Licensed by Information Handling ServicesA-A-55 2 6 2 3.2.7 Stitchinq. The stitch type shall be locked stitch for all seams, safety stitch for foot and hood attac

33、hments, and serge or over-edge stitch for the center-line seam (below the slide fastener). There shall be no exposed raw edges. along the slide fastener. There shall be 8 to 10 stitches per inch. The bartacks shall be 28 to 32 stitches per bartack, and 1/2 to 5/8 inch in length. Threads exposed to s

34、urface of sleeping bag shall be ticket sized 30, 2 or 3 ply (for all needles). Internally or hidden placed threads shall be ticket sized 50, 2 ply (for all loopers or bottom); and when applicable, the bartacks with 50, 2 ply for both needle and loopers. Each bag shall be double stitched 3.3 Material

35、s 3.3.1 Basic material. The basic material for the inner and outer shell of the patrol and intermediate bags shall be a 100 percent hydrophobic nylon ripstop with an approved water repellent finish. The material shall have a minimum weight of 1.9 oz/sq yd when tested in accordance with ASTM-D 3775,

36、Option C; a minimum yarn count of 98 filling yarns when tested in accordance with ASTM-D 3776; a minimum tearing strength of 9.0 pounds in the warp and filling when tested in accordance with ASTM-D 1424. The material shall be laundered for five cycles in accordance with test method AATCC 135-1992, (

37、l)VA(i). The laundered cloth shall have a minimum spray rating of 90, 90, 80 when tested in accordance with test method AATCC 22. The color for the outer and innershells shall be Camouflage Green 483 for the patrol bag (type I). The color for the outer and innershells shall be Black 357 for the inte

38、rmediate cold weather sleeping bag (type II). 3.3.1.1 Material for the stuff sack, compression. The material for the stuff sack, compression shall be nylon, plain weave, with an approved water-repellent finish. The color of the cloth shall match Black 357. The material shall weigh between 3.8 to 4.8

39、 oz/sq yd when tested in accordance with ASTM-D 3775, Option C with a minimum breaking strength of 275 pounds for the warp direction and 225 pounds for the filling direction when tested in accordance with ASTM-D 5034 and the minimum spray rating shall be 90, 90, 80 when tested in accordance with tes

40、t method AATCC 22. 3.4 Battinq material. The insulation for the type I and II sleeping bags shall be a 5 denier, single hole, hollow continuous filament (CF) polyester with at least 18 percent void, resin bonded. Bonding agent must be approved for bonding in battings (see 7.1). 5 Licensed by Informa

41、tion Handling ServicesA-A-55262 m 999997q 0167266 VbL m A-A-5 5 2 6 2 3.5 Slide fasteners. The slide fastener shall be a commercially sized 9 or 10 continuous monofilament (CM) coil chain (nylon or polyester) with a minimum chain filament diameter of 0.033 inch, minimum closed chain width of 0.320 i

42、nch, and minimum crosswise breaking strength of 250 pounds when tested, in accordance with test method ASTM-D 2061. The slide fasteners shall have two reversible double pull sliders configured mouth to mouth such that they will open at either end of the slide fastener. The bottom of the zipper shall

43、 have a closed slider stop and the top of the zipper shall have open slider stops. The total width, including tape, shall be 1 inch wide (i 1/16 inch); and the tape shall be 100 percent polyester and water-repellent treated. A closed bottom stop and open top stop shall be securely configured to the

44、slide fastener. As an option, the continuous chain method (off a roll) with added sliders, pulls, thongs, and secured stops may be used. The color of the chains, sliders, pulls, tapes and thongs shall match Camouflage Green 483 (cable number 34094), for the patrol bag and Black 357 for the intermedi

45、ate cold weather bag. 3.6 Thread. The thread for all seams shall have an approved finish, be water-repellent, and conform to A-A-50199 (Thread, Polyester Core, Cotton- or Polyester-Covered). The color of the thread shall approximate the color of the sleeping bag shell material as applicable. 3.7 Dra

46、wcord. The drawcord for the hood shall be 3/16 inch diameter elastic (multi-strand) with braided nylon cover. The drawcord for the stuff sack shall be 1/8 inch diameter braided nylon. The color shall match Black 357. 3.8 Barrel lock closure. The fastener and its adjusting device shall be capable of

47、withstanding 5 pounds pull force for 15 seconds with no signs of slippage or damage, after being on the cord for over 168 hours, using a cord conforming to type IIA of MIL-C-5040. The fastener and its adjusting device shall use black virgin acetal material with up to 20 percent reground of that same

48、 material. (For suggested sources of supply see 7.1.) 3.9 Buckle, double bar, one-inch. The fastener and its adjusting device shall be capable of withstanding 200 pounds pull force for 15 seconds when the angle of the fastener is between O degrees to 45 degrees with no slippage or damage using a one

49、-inch webbing conforming to type III of MIL-W-43668. The fastener and its adjusting device shall use black virgin acetal material with up to 20 percent reground of that same material. (For suggested sources of supply see 7.1.) 3.10 Grommet with washer. The grommet used on the stuff sack shall be a size O rolled rim grommet with spur washer, constructed from brass with a black chemical finish. 6 Licensed by Information Handling ServicesA-A-55262 = 9999974 0367267 3T W A-A-55 2 6 2 3.11 Snap fasteners. Snap fasteners for the sleeping bag, patrol (type I), and the sleeping bag, inter