DLA A-A-55267-1995 STRAP INVOLUNTARY RESTRAINT HANDCUFFS《防非自愿手铐皮带》.pdf

1、A-A-552b7 m 999997Y 0166823 674 A-A-55267 February 23. 1995 COMMERCIAL ITEM DESCRIPTION STRAP, INVOLUNTARY, RESTRAINT: HANDCUFFS The General Services Administration has authorized the use of this commercial item description, for all Federal agencies. 1. SCOPE 1.1 Scope. This commercial item descript

2、ion covers one type of flexible nylon restraint designed to be secured around the wrists and/or ankles of an apprehended person to restrict physical movement. The patented law enforcement restraint has two loops on a single strap, with two separate locks that can also be *double lockedv1 (see Figure

3、 2) to restrict pushing or pulling through the lock. The restraint must be cut off to be removed and is disposable. Each lock has two large teeth on a single trigger that engages into a ratchet fitted into the outside face of the strap itself. 2. Salient characteristics. The color shall be natural.

4、The material for the strap shall be polyamide nylon (recyclable) with no metal inserts. The overall length of the loop restraint strap shall be 33 5/8 inches. The width of the loop restraint strap shall be 5/16 i 1/32 inch. The thickness of the loop strap shall be 1/8 4 20/1000 inch. The strap is no

5、t to exceed 5/16 5 30/1000 inch in width. Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FQSE, 2800 South 20th Street, Phi

6、ladelphia, PA 19145-5099. AMSC N/A FSC 8465 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-552b E OLbb82b 383 A-A-552 67 At these dimensions the strap can properl

7、y torque and twist just enough to allow proper movement without ripping or cutting the skin, which would create a potential blood hazard. The lock shall be 3/4 inch square. with two large teeth approximately 3/16 inch wide x 1/4 inch long x 1/8 inch ledge, which fits tightly to the compatible ratche

8、t design of the strap. Each tooth has a .160 base and is .156 long with a .178 face and a 30 angle (with a tolerance of conforms to the producers own drawings, specifications, standards, and quality assurance practices; and is the same product offered for sale in the commercial marketplace. The Gove

9、rnment reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4.2 Market acceptability criteria. The item offered must have been sold to the commercial market or to the Government, and

10、the contractor shall certify and provide supporting documentation as to its serviceability and the long term (five years) availability of all necessary maintenance and logistics support parts and materials. 4.3 Warranty. The item offered shall include the standard warranty given to the commercial ma

11、rket beginning with the date of delivery of the individual items. 4.4 Visual examination. The strap shall be examined for the defects listed below: 4.4.1 Defects. Color not as specified; parts contaminated with oil, grease, or particulates burning; slay on lock latches; cracks or breaks when straps

12、are bent back and forth; teeth in straps not free of any molding defects; short, flash; excessive sink in the locking/latch area; any material defects, distorted parts or poor workmanship; any component part omitted; label missing, incorrect, or illegible; measurement of item not as specified; bar c

13、ode omitted or not readable by scanner; human- readable interpretation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item. 5. PACKAGING 5.1 Preservation, Packins, and markinq. The preservation, packing, and marking shall be as specified in t

14、he contract or order. 6. NOTES 6.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without

15、license from IHS-,-,-A-A-552b7 = 9999974 0166824 500 I A-A- 5 5 2 67 6.2 Source of non-Government documents ASTM Test Methods (Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) AATCC Test Method (Applications fo

16、r copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215.) 6.3 Accerkance criteria. Acceptance criteria shall be as specified in the contract or purchase order. 6.4 Fiqures. Figures 1 and 2 are furnished solely for g

17、uidance and information. Should the figures vary from the written document, the written document shall govern. 6.5 Sources of suisislv. Competition is not limited to the manufacturer listed below: 6.6 Strap manufacturers. A company manufacturing commercial straps that has the capability to meet this

18、 commercial item descriptions requirements is: Bingold Wrist-Straint, Inc. P.O. Box 1040 Cicero, N.Y. 13039-1040 (315) 699-1136 FAX (315) 699-1137 1-800-788-4076 MILITARY INTERESTS: Custodian Army - GL CIVIL AGENCY COORDINATING ACTIVITY : GSA - FSS PREPARING ACTIVITY: DLA - CT Project No. 8465-0166

19、4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-552b7 9999974 OLbb27 2LT A-A-55267 Figure 1. Strap, Involuntary, Restraint: Handcuffs 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55267 999997i.1 0366828 356 1 A-A-55267 W 1 I Figure 2. StraD, Involuntarv. Restraint: Handcuffs 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-